FQB33N10 / FQI33N10 April 2000 QFET TM FQB33N10 / FQI33N10 100V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for low voltage applications such as audio amplifier, high efficiency switching DC/DC converters, and DC motor control. • • • • • • • 33A, 100V, RDS(on) = 0.052Ω @VGS = 10 V Low gate charge ( typical 38 nC) Low Crss ( typical 62 pF) Fast switching. 100% avalanche tested Improved dv/dt capability 175°C maximum junction temperature rating D D ! G S D2-PAK G D S FQB Series Absolute Maximum Ratings Symbol VDSS I2-PAK ! FQI Series S TC = 25°C unless otherwise noted Parameter ID Drain-Source Voltage - Continuous (TC = 25°C) Drain Current IDM Drain Current VGSS Gate-Source Voltage EAS IAR EAR FQB33N10 / FQI33N10 - Continuous (TC = 100°C) dv/dt PD - Pulsed (Note 1) TL Units 100 V 33 A 23 A 132 A ±25 V Single Pulsed Avalanche Energy (Note 2) 435 mJ Avalanche Current (Note 1) 33 A Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TA = 25°C) * (Note 1) 12.7 6.0 3.75 mJ V/ns W 127 0.85 -55 to +175 W W/°C °C 300 °C (Note 3) Power Dissipation (TC = 25°C) TJ, TSTG ! " G! - Derate above 25°C Operating and Storage Temperature Range Maximum lead temperature for soldering purposes, 1/8 from case for 5 seconds Thermal Characteristics Symbol RθJC Typ Max Thermal Resistance, Junction-to-Case Parameter -- 1.18 Units °CW RθJA Thermal Resistance, Junction-to-Ambient * -- 40 °CW RθJA Thermal Resistance, Junction-to-Ambient -- 62.5 °CW * When mounted on he minimum pad size recommended (PCB Mount) ©2000 Fairchild Semiconductor International Rev. A, April 2000 Symbol C = 25°C unless otherwise noted Parameter Test Conditions Min Typ Max Units 100 -- -- V Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA ∆BVDSS / ∆TJ Breakdown Voltage Temperature Coefficient ID = 250 µA, Referenced to 25°C -- 0.11 -- V/°C 1 µA IDSS Zero Gate Voltage Drain Current VDS = 100 V, VGS = 0 V -- -- VDS = 80 V, TC = 150°C -- -- 10 µA IGSSF Gate-Body Leakage Current, Forward VGS = 25 V, VDS = 0 V -- -- 100 nA IGSSR Gate-Body Leakage Current, Reverse VGS = -25 V, VDS = 0 V -- -- -100 nA 2.0 -- 4.0 V -- 0.040 0.052 Ω -- 22 -- S -- 1150 1500 pF -- 320 420 pF -- 62 80 pF -- 15 40 ns ns On Characteristics VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA RDS(on) Static Drain-Source On-Resistance VGS = 10 V, ID = 16.5 A gFS Forward Transconductance VDS = 40 V, ID = 16.5 A (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 50 V, ID = 33 A, RG = 25 Ω (Note 4, 5) VDS = 80 V, ID = 33 A, VGS = 10 V (Note 4, 5) -- 195 400 -- 80 170 ns -- 110 230 ns -- 38 51 nC -- 7.5 -- nC -- 18 -- nC Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current -- -- 33 A ISM -- -- 132 A VSD Maximum Pulsed Drain-Source Diode Forward Current VGS = 0 V, IS = 33 A Drain-Source Diode Forward Voltage -- -- 1.5 V trr Reverse Recovery Time -- 80 -- ns Qrr Reverse Recovery Charge VGS = 0 V, IS = 33 A, dIF / dt = 100 A/µs -- 0.22 -- µC (Note 4) Notes 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 0 6mH, IAS = 33A, VDD = 25V, RG = 25 Ω, Starting TJ = 25°C 3. ISD 33A, di/dt 300A/µs, VDD BVDSS, Starting TJ = 25°C 4. Pulse Test : Pulse width 300µs, Duty cycle 2% 5. Essentially independent of operating temperature ©2000 Fairchild Semiconductor International Rev. A, April 2000 FQB33N10 / FQI33N10 Electrical CharacteristicsT ID, Drain Current [A] VGS 15.0 V 10.0 V 8.0 V 7.0 V 6.0 V 5.5 V 5.0 V Bottom 4.5 V 2 10 Top ID, Drain Current [A] 2 10 1 10 1 10 175 25 Notes 1. 250s Pulse Test 2. TC 25 0 10 Notes 1. VDS 40V 2. 250s Pulse Test -55 0 10 1 0 10 1 10 2 10 4 6 8 10 VGS, Gate-Source Voltage [V] VDS, Drain-Source Voltage [V] Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 0.20 2 10 IDR, Reverse Drain Current [A] R DS(ON) [ ], Drain-Source On-Resistance 0.15 VGS = 10V 0.10 VGS = 20V 1 10 0.05 Note T 25 175 Notes 1. VGS 0V 2. 250s Pulse Test 25 0.00 0 20 40 60 80 100 120 0 10 ID, Drain Current [A] 0.2 3000 0.4 0.6 0.8 1.0 1.2 1.4 VSD, Source-Drain voltage [V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 12 Ciss Cgs + Cgd (Cds shorted) Coss Cds + Cgd Crss Cgd 2500 VDS = 50V 10 2000 Ciss Notes 1. VGS 0 V 2. f 1 MHz Coss 1500 1000 C ss 500 V GS , Gate-Source Voltage [V] VDS = 80V Capacitance [pF] FQB33N10 / FQI33N10 Typical Characteristics 8 6 4 2 Note ID 33A 0 0 0 -1 10 0 10 VDS, Drain-Source Voltage [V] Figure 5. Capacitance Characteristics ©2000 Fairchild Semiconductor International 5 10 15 20 25 30 35 40 1 10 QG, Total Gate Charge [nC] Figure 6. Gate Charge Characteristics Rev. A, April 2000 FQB33N10 / FQI33N10 Typical Characteristics (Continued) 1.2 3.0 BV DSS , (Normalized) Drain-Source Breakdown Voltage 2.5 RDS(ON) , (Normalized) Drain-Source On-Resistance 1.1 1.0 Notes : 1. VGS = 0 V 2. ID = 250 A 0.9 0.8 -100 -50 0 50 100 2.0 1.5 1.0 Notes 1. VGS 10 V 2. ID 16.5 A 0.5 150 0.0 -100 200 -50 0 50 100 150 200 o o TJ, Junction Temperature [ C] TJ, Juncion Temperature [ C] Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 35 Operation in This Area is Limited by R DS(on) 2 25 100 µ s ID , Drain Current [A] ID , Drain Current [A] 10 30 1 ms 10 ms 10 1 DC Notes 20 15 10 o 1. TC 25 C 10 10 5 o 0 2. T 175 C 3. Single Pulse 0 10 1 0 25 2 10 50 100 125 150 175 Figure 10. Maximum Drain Current vs. Case Temperature 0 D = 0 .5 N otes 1 . Z C( t ) 1 . 1 8 /W M a x . 2 . D u t y F a c t o r , D t /t 2 3. T M - TC P D M * Z C( t ) 0 .2 0 .1 10 -1 0 .0 5 PDM 0 .0 2 JC (t), T h e rm a l R e s p o n s e Figure 9. Maximum Safe Operating Area 10 75 TC, Case Temperature [] VDS, Drain-Source Voltage [V] 1 0 .0 1 t2 Z s in g le p u ls e 10 -2 10 -5 10 - 10 -3 10 -2 10 -1 10 0 10 1 t1 , S q u a r e W a v e P u ls e D u r a tio n [s e c ] Figure 11. Transient Thermal Response Curve ©2000 Fairchild Semiconductor International Rev. A, April 2000 FQB33N10 / FQI33N10 Gate Charge Test Circuit & Waveform VGS Same Type as DUT 50K Qg 200nF 12V 10V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Resistive Switching Test Circuit & Waveforms VDS RL VDS 90% VDD VGS RG VGS DUT 10V 10% td(on) tr td(off) t on tf t off Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- L IAS2 -------------------2 BVDSS - VDD L VDS BVDSS IAS ID RG VDD DUT 10V tp ©2000 Fairchild Semiconductor International ID (t) VDS (t) VDD tp Time Rev. A, April 2000 FQB33N10 / FQI33N10 Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ I SD L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop ©2000 Fairchild Semiconductor International Rev. A, April 2000 4.50 ±0.20 9.90 ±0.20 +0.10 2.00 ±0.10 (0.75) 3° ~ 0° 0.80 ±0.10 1.27 ±0.10 2.54 TYP 2.54 ±0.30 15.30 ±0.30 0.10 ±0.15 2.40 ±0.20 4.90 ±0.20 9.20 ±0.20 1.30 –0.05 1.20 ±0.20 (0.40) D2PAK 1.40 ±0.20 +0.10 0.50 –0.05 2.54 TYP 4.90 ±0.20 (2XR0.45) 9.20 ±0.20 10.00 ±0.20 (7.20) (1.75) 10.00 ±0.20 (8.00) (4.40) 15.30 ±0.30 FQB33N10 / FQI33N10 Package Dimensions 0.80 ±0.10 ©2000 Fairchild Semiconductor International Rev. A, April 2000 (Continued) I2PAK 4.50 ±0.20 (0.40) 9.90 ±0.20 +0.10 MAX13.40 9.20 ±0.20 (1.46) 1.20 ±0.20 1.30 –0.05 0.80 ±0.10 2.54 TYP 2.54 TYP 10.08 ±0.20 1.47 ±0.10 MAX 3.00 (0.94) 13.08 ±0.20 ) 5° (4 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 10.00 ±0.20 ©2000 Fairchild Semiconductor International Rev. A, April 2000 FQB33N10 / FQI33N10 Package Dimensions TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOS™ FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench® QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2000 Fairchild Semiconductor International Rev. A, January 2000