FERRITE WIRE WOUND INDUCTORS AISC-0603F Pb FEATURES: • Higher inductance values than other 0603 inductors • Ferrite construction for high current rating • Inductance values: 47 nH – 22 μH; 5% tolerance available RoHS/RoHS II Compliant 1.6 x 1.0 x 1.0mm APPLICATIONS: • Camcorders, LED TVs and other electronic devices STANDARD SPECIFICATIONS: Part Number AISC-0603FInductance Code Units Symbol AISC-0603F-47N AISC-0603F-51N AISC-0603F-R10 AISC-0603F-R12 AISC-0603F-R15 AISC-0603F-R18 AISC-0603F-R20 AISC-0603F-R22 AISC-0603F-R24 AISC-0603F-R25 AISC-0603F-R27 AISC-0603F-R33 AISC-0603F-R39 AISC-0603F-R47 AISC-0603F-R50 AISC-0603F-R56 AISC-0603F-R62 AISC-0603F-R65 AISC-0603F-R68 AISC-0603F-R78 AISC-0603F-R82 AISC-0603F-1R0 AISC-0603F-1R2 AISC-0603F-1R5 AISC-0603F-1R8 AISC-0603F-2R2 AISC-0603F-2R7 AISC-0603F-3R3 AISC-0603F-3R9 AISC-0603F-4R7 AISC-0603F-5R6 AISC-0603F-6R8 AISC-0603F-7R8 AISC-0603F-8R2 AISC-0603F-100 AISC-0603F-150 AISC-0603F-180 AISC-0603F-220 ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Inductance Tolerance L Test Freq. Max. DC Resistance Max. Rated Current Min. Self-resonant Frequency nH L 47 51 100 120 150 180 200 220 240 250 270 330 390 470 500 560 620 650 680 780 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 7800 8200 10000 15000 18000 22000 J, K, M J, K, M K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M J, K, M MHz Freq. 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 Ω DCR 0.06 0.07 0.11 0.18 0.12 0.19 0.14 0.20 0.17 0.17 0.24 0.29 0.33 0.37 0.45 0.51 0.48 0.61 0.77 0.83 0.88 0.94 1.10 1.30 1.40 1.50 1.60 1.80 1.90 2.70 3.00 4.00 4.40 4.50 5.00 9.50 10.40 11.40 mA Ir 1200 1050 850 670 820 670 740 650 690 690 630 510 490 470 410 380 390 350 310 300 290 280 260 240 230 220 210 200 190 160 150 130 120 110 100 90 80 70 MHz S.R.F 2350 2300 1370 1340 1260 1060 1030 850 800 910 780 730 750 670 610 590 570 550 520 480 500 410 370 340 190 120 70 60 50 50 40 40 40 40 30 20 20 20 Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com FERRITE WIRE WOUND INDUCTORS AISC-0603F Pb RoHS/RoHS II Compliant 1.6 x 1.0 x 1.0mm Test Equipment Inductance (L): Agilent 4287A+Agilent 16197A or equivalent, -13dBm or 10mA DC Resistance (DCR): HIOKI 3540 or equivalent Q Factor (Q): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Self-Resonant Frequency (SRF): Agilent4991B+Agilent16197A and HP 8753E or equivalent, -20dBm or 50mV Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 40oC against chip initial surface temperature (Ta) Operating Temperature: -40ºC to +85ºC Storage Temperature: -10ºC to +40ºC, 70% RH max. in tape and reel PART NUMBER IDENTIFICATION - AISC-0603F- Inductance Code Tolerance Code Packaging Please refer to the Table J: ± 5% T: 3kpcs/reel K: ± 10% M: ± 20% OUTLINE DIMENSIONS: A 1.6±0.2 B 1.0±0.2 C D REF. E REF. F REF. H REF. I REF. J REF. 1.0±0.2 0.38 0.76 0.30 1.02 0.64 0.64 Dimension: mm ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com FERRITE WIRE WOUND INDUCTORS AISC-0603F Pb RoHS/RoHS II Compliant 1.6 x 1.0 x 1.0mm Materials No. A B C D Components Coating Core Wire Electrodes Material Ultraviolet epoxy resin Ferrite Polyurethane system enameled copper wire Ag-Pd with Ni and Sn plating REFLOW PROFILE: Peak 260 ºC max 260 ºC 217 ºC Max Ramp Up Rate=3 • • • • • • C/s ec . º Max Ramp Down Rate=6 C/sec . º 60〜90s ec . 200 C º 150 ºC Preheat condition: 150 ~200oC/60~120sec. Allowed time above 217 oC: 60~90sec. Max temp: 260 oC Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max 60〜120sec . 25 ºC Time 25 ºC to Peak =8 min max TAPE & REEL: T= tape and reel (3,000pcs/reel) B P K T 1.20±0.05 1.85±0.05 4.0±0.1 1.02±0.05 0.23±0.05 10 ±1.5 5.0 ±0.1 58 ±2 3.0 ±0.1 178 ±2 13.5 ±0.2 4.0±0.1 A Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001 / QS:2008 9000 CE RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.11.13 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com