Multi-layer Chip Inductors - Ferrite CTML1206HCF Series From .47µH to 4.7µH www.ctparts.com SPECIFICATIONS Parts are available in ±20% inductance tolerance only. Part Number Inductance (µH) Test Freq. (MHz) SRF Min. (MHz) DCR ±30% (Ω) IDC Max. (mA) CTML1206HCF-R47M CTML1206HCF-R68M CTML1206HCF-R82M CTML1206HCF-1R0M CTML1206HCF-1R2M CTML1206HCF-1R5M CTML1206HCF-1R8M CTML1206HCF-2R2M CTML1206HCF-3R3M CTML1206HCF-4R7M 0.47 0.68 0.82 1.0 1.2 1.5 1.8 2.2 3.3 4.7 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 100 90 80 60 60 50 50 40 30 20 0.14 0.15 0.16 0.16 0.16 0.20 0.20 0.22 0.24 0.30 1500 1500 1500 1400 1400 1200 1200 1200 1100 1100 PHYSICAL DIMENSIONS Size A mm inches 3.2±0.2 1.60±0.2 1.1±0.2 0.5±0.3 0.126±0.008 0.062±0.008 0.043±0.008 0.020±0.012 B C D Not Shown at Actual Size CHARACTERISTICS Description: Ferrite core, multi-layer chip inductor. Magnetic shielded. Applications: LC resonant circuits such as oscillator and signal generators, RF filters, disk drives, audio and video equipment, TV, radio and telecomunication equipment. Operating Temperature: -25°C to +85°C Inductance Tolerance: M = ±20% Testing: Inductance and Q are tested on an HP4287A at 1MHz, 250mV. Packaging: Tape & Reel. Marking: Reels marked with inductance code and tolerance. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2013 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 06.10.13