DCMP15 Series Regulated/Adjustable DC-DC High Voltage Modules • • • • • • • • • • • • • 0 to 6kV of output voltage Up to 3W of output power 15VDC Input voltage Zero to Full Output Positive and Negative Models Externally Voltage Programmable Reference Voltage Output Short-circuit Protection Rugged, encapsulated module Sine-wave topology Low ripple PCB Mounting High Efficiency Conditions Input Input Voltage Power All Versions At Max load Value Units 15 <7.5 VDC W ±4 ±6 10% to 100% 3 0.75 0.5 <5% (positive models) <15% (negative models) <0.5% <7.5% <0.2% kVDC max kVDC max 0 to +60 0.10 -40 to +85 0 to 95% 0 to 10000 °C %/°C °C RH Feet Output Voltages Available Primary Output Voltage Adjustment Power Current, Primary Output 0 – 5 VDC Input Nominal Input, Max Vo Regulation, Primary Vo Any Static Load, Max Vo Ripple Line Regulation Stability Full Load, Max Vo Over input V range, Full Power Over 8hr, 30 min warm up Environmental Case Temp, Full Load, Max Vo Over the Operating Temperature Non-Operating, Case Temp Non-Condensing Standard Operating Conditions Operating Temperature Temp Coefficient Storage Humidity Altitude Nominal Input, Max Vo [email protected] WWW.DEANTECHNOLOGY.COM +1.972.248.7691 W mA VDC Vp-p VDC VDC VERSION: 2.0 EFFECTIVE: 06 JULY 2015 PAGE: 1 OF 2 DCMP15 Series Part Number DCMP15-4P3 DCMP15-4N3 DCMP15-6P3 DCMP15-6N3 Input Voltage 0 to 15 VDC 0 to 15 VDC 0 to 15 VDC 0 to 15 VDC Output Voltage 0 to 4kV 0 to -4kV 0 to 6kV 0 to -6kV Polarity Positive Negative Positive Negative Output Power 3 Watts 3 Watts 3 Watts 3 Watts Maximum Output Current 750uA 750uA 500uA 500uA Applications: • • • • • • Photomultipliers Ionizers High Voltage Biasing CRT Grid Circuits Biasing Dielectric Testing • • • • • Piezoelectric Drivers Electrostatic Chucks Sealing Applications Ink Jet Printers Photo Detectors Mechanical: • • • • Dimensions: 3.75" x 1.5" x 1.0" Pins: 0.040" Diameter Weight: 6.0 Ounces Operating Temperature Range: -40°C to +70°C [email protected] WWW.DEANTECHNOLOGY.COM +1.972.248.7691 VERSION: 2.0 EFFECTIVE: 06 JULY 2015 PAGE: 2 OF 2