DIGITRON SEMICONDUCTORS MCR2150(A) SERIES SILICON CONTROLLED RECTIFIERS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Repetitive peak off-state voltage Peak repetitive reverse voltage MCR2150(A)-4 MCR2150(A)-5 MCR2150(A)-6 MCR2150(A)-7 MCR2150(A)-8 MCR2150(A)-9 MCR2150(A)-10 Value Unit (1) 200 300 400 500 600 700 800 VRRM VDRM Forward current RMS (all conduction angles) Volts IT(RMS) 15 Amps Peak forward surge current (1/2 cycle, sine wave, 60 Hz) ITSM 160 Amps Circuit fusing considerations (t = 8.3ms) I2t 100 A2s Forward peak gate power PGM 5.0 Watts PG(AV) 0.5 Watts IGM 2.0 Amps TJ -40 to +125 °C Tstg -40 to +150 °C Forward average gate power Forward peak gate current Operating junction temperature range Storage temperature range Note 1: VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for zero or negative gate voltage. Devices should not be tested for blocking capability in a manner such that the voltage supplied exceeds the rated blocking voltage. THERMAL CHARACTERISTICS Characteristic Thermal resistance, junction to case Symbol Maximum Unit RӨJC 1.5 °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Peak forward blocking current (Rated VDRM @ TJ = 125°C) IDRM Peak reverse blocking current (Rated VRRM @ TJ = 125°C) IRRM Peak on-state voltage(2) (ITM = 10A peak) (ITM = 30A peak) VTM Gate trigger current (continuous dc) (VD = 7.0V, RL = 100Ω) IGT Gate trigger voltage (continuous dc) (VD = 7.0V, RL = 100Ω) VGT Holding current (VD = 7.0V, RL = 100Ω) IH Turn-off time (VDRM = rated voltage) (ITM = 10, di/dt = 5.0A/µs, reapplied dv/dt = 50V/µs) MCR2150 MCR2150A tq Forward voltage application rate dv/dt Min Typ. Max - - 3.0 - - 3.0 - - 3.0 3.75 - - 50 - - 2.5 - - 100 - 3.0 - 10 4.0 100 150 - Note 2: Pulse test: pulse width = 1.0ms, duty cycle ≤ 2%. 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130128 Unit mA mA Volts mA Volts mA µs V/µs DIGITRON SEMICONDUCTORS MCR2150(A) SERIES SILICON CONTROLLED RECTIFIERS MECHANICAL CHARACTERISTICS Case TO-220AB Marking Alpha-numeric Pin out See below TO-220AB A B C D F G H J K L N Q R S T U V Z 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 Inches Min Max 0.575 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.055 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.050 0.045 0.080 Millimeters Min Max 14.600 15.750 9.650 10.290 4.060 4.820 0.640 0.890 3.610 3.730 2.410 2.670 2.790 3.930 0.360 0.560 12.700 14.270 1.140 1.390 4.830 5.330 2.540 3.040 2.040 2.790 1.140 1.390 5.970 6.480 1.270 1.140 2.030 [email protected] www.digitroncorp.com Rev. 20130128 DIGITRON SEMICONDUCTORS MCR2150(A) SERIES 144 Market Street Kenilworth NJ 07033 USA SILICON CONTROLLED RECTIFIERS phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130128