Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type : ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction Features ● Small in size ● For reflow soldering ● RoHS directive compliant Recommended applications ● General purpose (Coupling, By-pass) Explanation of part number 1 2 3 4 E C W U Product code Dielectric & construction 5 6 7 8 9 10 11 C Rated voltage Capacitance Cap. Tol. Suffix 1 100 V.DC J 2 250 V.DC K ±10 % ±5 % 2 3 4 5 6 7 8 9 10 11 E C W U 1 1 0 4 V 3 3 Dielectric & construction Rated voltage 1 Capacitance 100 V.DC 2 3 4 5 6 7 E C W U C 2 J Dielectric & construction Suffix 9 12 mm V 16 mm Suffix Small in size, Cap. Tol. : ±5 %, Tape width : 12 mm 1 Product code Suffix Code Tape width 1 Product code 12 Rated voltage 8 9 10 Capacitance 2J 630 V.DC 11 12 J V Cap. Tol. Suffix J Code Tape width ±5 % V 16 mm Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan d) Withstand voltage Insulation resistance (IR) Soldering conditions – 55 °C to +125 °C 100 V.DC, 250 V.DC, 630 V.DC (Derating of rated voltage by 1.25 %/°C more than 85 °C) 100 V.DC 0.012 μF to 1.0 μF (E12) 250 V.DC 0.0010 μF to 0.12 μF (E12) 630 V.DC 0.022 μF, 0.027 μF, 0.033 μF 100 V.DC ±5 %(J), ±10 %(K) (C > 0.18 μF : ±10 %(K) Only) 250 V.DC ±5 %(J), ±10 %(K) 630 V.DC ±5 %(J) tan d < 1.0 % (20 °C, 1 kHz) Between terminals : Rated volt. (V.DC)×150 %, 60 s C < 0.33 μF 100 V.DC, 250 V.DC, 630 V.DC : IR > 3000 MΩ (20 °C, 100 V.DC, 60 s) C > 0.33 μF 100 V.DC : IR > 1000 MΩ∙μF (20 °C, 100 V.DC, 60 s) 100 V.DC Reflow soldering : 250 °C max. and 60 s max. at more than 220 °C 250 V.DC (Temp. at capacitor surface) 630 V.DC Reflow soldering : 250 °C max. and 60 s to 150 s. at more than 217 °C (Temp. at cap. surface) ✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ✽ Please consult us for capacitance range between 0.15 μF and 1.0 μF. (250 V.DC) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016 Plastic Film Capacitors Construction Dimensions Unit : mm (±0.5) ✽✽ (±0.4) ✽ L±0.2 H±0.2 (±0.3) ✽✽✽ (±0.4) ✽✽✽ W±0.3 Outer electrode Element (Stacked) 0.35±0.20 0.35±0.20 ✽ To be applied only for size code Z, X ✽✽ To be applied only for size code V ✽✽✽ To be applied only for size code B, Z, X, V Size code E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z X V L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 7.1 7.7 9.8 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.5 6.3 H 1.4 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 ✽ ✽ Refer to the column “Rating, Dimensions & Quantity”. Taping specification for automatic mounting Refer to the page of taping specifications Rating · Dimensions · Quantity ● Capacitance Capacitance (μF) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 tolerance : ±5 %(J), ±10 %(K) Rated voltage 100 V.DC Dimensions (mm) Part No. L W H Size code Q'ty Please use 0.001 μF to 0.01 μF rating ECWU(X) ECWU1123◻C9 ECWU1153◻C9 ECWU1183◻C9 ECWU1223◻C9 ECWU1273◻C9 ECWU1333◻C9 ECWU1393◻C9 ECWU1473◻C9 ECWU1563◻C9 ECWU1683◻C9 ECWU1823◻C9 ECWU1104◻C9 ECWU1104V33 ECWU1124◻C9 ECWU1154◻C9 ECWU1184KC9 ECWU1224KC9 ECWU1274KC9 ECWU1334KC9 ECWU1394KCV ECWU1474KCV ECWU1564KCV ECWU1684KCV ECWU1824KCV ECWU1105KCV 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 4.8 6.0 6.0 7.1 7.1 7.1 7.1 7.7 7.7 9.8 9.8 9.8 9.8 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 3.3 4.1 4.1 5.0 5.0 5.0 5.0 5.5 5.5 6.3 6.3 6.3 6.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.8 2.4 2.8 2.0 2.4 2.9 3.5 3.4 4.0 3.0 3.6 4.3 5.1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D1 E3 D3 D4 Z Z Z Z x x V V V V 3000 2000 Rated voltage 250 V.DC Dimensions (mm) Part No. L W H ECWU2102◻C9 4.8 3.3 1.4 ECWU2122◻C9 4.8 3.3 1.4 ECWU2152◻C9 4.8 3.3 1.4 ECWU2182◻C9 4.8 3.3 1.4 ECWU2222◻C9 4.8 3.3 1.4 ECWU2272◻C9 4.8 3.3 1.4 ECWU2332◻C9 4.8 3.3 1.4 ECWU2392◻C9 4.8 3.3 1.4 ECWU2472◻C9 4.8 3.3 1.4 ECWU2562◻C9 4.8 3.3 1.4 ECWU2682◻C9 4.8 3.3 1.4 ECWU2822◻C9 4.8 3.3 1.4 ECWU2103◻C9 4.8 3.3 1.4 ECWU2123◻C9 4.8 3.3 1.4 ECWU2153◻C9 4.8 3.3 1.4 ECWU2183◻C9 4.8 3.3 2.0 ECWU2223◻C9 4.8 3.3 2.0 ECWU2273◻C9 4.8 3.3 2.4 ECWU2333◻C9 4.8 3.3 2.8 ECWU2393◻C9 6.0 4.1 2.0 ECWU2473◻C9 6.0 4.1 2.4 ECWU2563◻C9 6.0 4.1 2.8 ECWU2683◻C9 6.0 4.1 3.2 ECWU2823◻C9 6.0 5.0 3.2 Size code E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D2 D3 D4 D5 B 3000 ECWU2104◻C9 6.0 5.0 3.8 B 2000 ECWU2124◻C9 6.0 5.0 4.5 B Q'ty 3000 2000 3000 2000 1500 1500 1000 ✽ ◻ : Capacitance tolerance Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016 Plastic Film Capacitors Rating · Dimensions · Quantity ● Capacitance tolerance : ±5 %(J) Rated voltage 630 V.DC Capacitance (μF) 0.022 Dimensions (mm) Part No. ECWUC2J223JV L W H Size code 7.1 6.3 3.6 Y 0.027 ECWUC2J273JV 7.1 6.3 4.1 Y 0.033 ECWUC2J333JV 7.1 6.3 5.1 Y Q'ty 1000 Recommended for land dimensions Unit : mm Land dimensions Electrode Size code C Land A B E1, E2, E3a, E3 D1, D2, D3, D4, D5 B Z Y X V Reflow soldering A 2.6 3.8 3.8 4.5 4.5 5.1 7.2 B 6.6 7.8 7.8 9.0 9.0 9.7 11.9 C 3.0 3.8 4.6 4.6 5.7 5.0 5.7 ✽ lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016