140 CRH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • SMD-version with base plate, lead (Pb)-free reflow solderable • Charge and discharge proof, no peak current limitation 140 CRH 125 °C • Parts for advanced high temperature reflow soldering according to JEDEC J-STD-020 available 146 CTI Lower Z • Compliant to RoHS Directive 2002/95/EC Lower temp. • Vibration proof, 4-pin version and 6-pin version • AEC-Q200 qualified 150 CRZ • Extended useful life for MAL214099...E3 parts to 6000 h at 125 °C Fig. 1 APPLICATIONS • SMD technology, for high temperature reflow soldering QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range VALUE • Industrial and professional applications 8 x 8 x 10 to 18 x 18 x 21 • Automotive, general industrial, telecom ± 20 % 6.3 V to 63 V - 55 °C to + 125 °C Endurance test at 125 °C 1000 h to 5000 h Useful life at 125 °C 1500 h to 6000 h Useful life at 40 °C 1.8 x lR applied 150 000 h to 500 000 h Shelf life at 0 V, 125 °C Based on sectional specification Climatic category IEC 60068 Document Number: 28396 Revision: 09-May-11 • Smoothing, filtering, buffering 10 μF to 4700 μF 1000 h IEC 60384-18/CECC 32300 MARKING • Rated capacitance (in μF) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Black mark or “-” sign indicating the cathode (the anode is identified by bevelled edges) • Code indicating group number (H) PACKAGING Supplied in blister tape on reel 55/125/56 For technical questions, contact: [email protected] www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (μF) 6.3 10 16 25 35 50 63 10 8 x 8 x 10 22 8 x 8 x 10 33 8 x 8 x 10 47 8 x 8 x 10 10 x 10 x 10 68 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 100 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 150 8 x 8 x 10 10 x 10 x 14 - - 220 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 12.5 x 12.5 x 13 12.5 x 12.5 x 16 330 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 16 x 16 x 21 470 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 12.5 x 12.5 x 16 16 x 16 x 16 18 x 18 x 16 18 x 18 x 21 680 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 820 16 x 16 x 21 16 x 16 x 16 16 x 16 x 16 16 x 16 x 21 16 x 16 x 21 1000 12.5 x 12.5 x 16 1200 1500 16 x 16 x 21 18 x 18 x 21 18 x 18 x 16 18 x 18 x 16 - 18 x 18 x 21 - 18 x 18 x 16 18 x 18 x 21 18 x 18 x 21 - - 16 x 16 x 16 16 x 16 x 21 18 x 18 x 21 - - 18 x 18 x 16 18 x 18 x 16 - - - 16 x 16 x 21 18 x 18 x 21 - - - - 16 x 16 x 16 3300 16 x 16 x 21 18 x 18 x 16 - - - - - 4700 18 x 18 x 21 - - - - - 18 x 18 x 21 - - - - 18 x 18 x 21 - - - - HMAX. MAX. 0.3 HMAX. MAX. 0.3 B LMAX. L1MAX.S 35V 1000u 3R-H D WMAX. B WMAX. L1MAX. S 25V 2200u L4-H 25V 220 u A4-H D 6-pin: ≥ Ø 16 mm min. 0.4/max. 1.0 (2 x) 4-pin: Ø 12.5 mm min. 0.4/max. 1.0 (2 x) 2-pin: ≤ Ø 10 mm min. 0.4/max. 1.0 (2 x) 2200 HMAX. MAX. 0.3 D WMAX. B LMAX. L1MAX. S LMAX. Fig. 2 - Dimensional outline www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 28396 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 8 x 8 x 10 0810 8.5 8.5 10.5 8.0 1.0 2.2 10.2 1.0 10 x 10 x 10 1010 10.5 10.5 10.5 10.0 1.0 3.5 12.1 1.3 10 x 10 x 14 1014 10.5 10.5 14.3 10.0 1.0 3.5 12.1 1.5 12.5 x 12.5 x 13 1213 12.9 12.9 14.0 12.5 1.3 3.6 14.9 2.6 12.5 x 12.5 x 16 1216 12.9 12.9 16.5 12.5 1.3 3.6 14.9 2.8 16 x 16 x 16 1616 16.6 16.6 17.5 16.0 1.3 6.5 18.6 5.5 16 x 16 x 21 1621 16.6 16.6 22.0 16.0 1.3 6.5 18.6 6.0 18 x 18 x 16 1816 19.0 19.0 17.5 18.0 1.3 6.5 21.0 8.0 18 x 18 x 21 1821 19.0 19.0 22.0 18.0 1.3 6.5 21.0 8.3 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 8 x8 x 10 0810 16 24 11.6 380 500 10 x 10 x 10 1010 16 24 11.6 380 500 10 x 10 x 14 1014 16 24 15.4 330 250 12.5 x 12.5 x 13 1213 20 24 16.2 380 250 12.5 x 12.5 x 16 1216 24 32 18.5 380 200 16 x 16 x 16 1616 28 44 18.9 380 150 16 x 16 x 21 1621 28 44 23.4 380 100 18 x 18 x 16 1816 32 44 18.9 380 125 18 x 18 x 21 1821 32 44 23.4 380 100 Note • Detailed tape dimensions see section “PACKAGING” Document Number: 28396 Revision: 09-May-11 For technical questions, contact: [email protected] www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and/or adjacent components. For maximum conditions refer to Fig. 4 or Fig. 5. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. e a c a d b f b b d a c a a Case size Ø D ≤ 10 mm c a Case size Ø D ≥ 16 mm Case size Ø D = 12.5 mm Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c d e f 0810 4.4 2.5 3.0 - - - 1010 4.4 2.5 4.0 - - - 1014 4.4 2.5 4.0 - - - 1213 6.3 2.5 4.0 4.2 5.0 5.6 1216 6.3 2.5 4.0 4.2 5.0 5.6 1616 7.8 9.6 4.7 - - - 1621 7.8 9.6 4.7 - - - 1816 8.8 9.6 4.7 - - - 1821 8.8 9.6 4.7 - - - www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 28396 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents STANDARD SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS T (°C) TPeak 230 217 t4 t3 200 150 t2 t1 time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL214097xxxE3 CASE CODE 0810 TO 1014 CASE CODE 1213 TO 1216 Max. time from 25 °C to TPeak 240 s 200 s Min. ramp-up rate to 150 °C 3 K/s 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s 120 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time from 200 °C to 217 °C (t2) 60 s 60 s Max. time above TLiquidus (217 °C) (t3) 90 s 60 s Max. time above 230 °C (t4) 40 s 30 s 250 °C 240 °C Max. time above TPeak minus 5 °C 5s 10 s Max. ramp-down rate from TLiquidus 3 K/s to 6 K/s 3 K/s to 6 K/s PROFILE FEATURES Ramp up rate from 200 °C to TPeak Peak temperature TPeak Notes • Temperature measuring point on top of the case and on terminals • Max. 2 runs with pause of min. 30 min in between Document Number: 28396 Revision: 09-May-11 For technical questions, contact: [email protected] www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS ACCORDING TO JEDEC J-STD-020 T (°C) TPeak 230 217 t4 t3 200 190 t2 150 t1 25 time (s) Fig. 5 - Maximum temperature load during reflow soldering Table 5 REFLOW SOLDERING CONDITIONS for MAL214099xxxE3 CASE CODE 1010 CASE CODE 1213 TO 1216 CASE CODE 1616 TO 1821 Max. time from 25 °C to TPeak 300 s 300 s 300 s Min. ramp-up rate to 150 °C 3 K/s 3 K/s 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s 150 s 150 s Max. time from 190 °C to 200 °C (t2) 110 s 110 s 110 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time above TLiquidus (217 °C) (t3) 90 s 90 s 90 s Max. time above 230 °C (t4) 70 s 65 s 60 s 260 °C 250 °C 245 °C 40 s 30 s 30 s 3 K/s to 6 K/s 3 K/s to 6 K/s 3 K/s to 6 K/s PROFILE FEATURES Ramp up rate from 200 °C to TPeak Peak temperature TPeak Max. time above TPeak minus 5 °C Ramp-down rate from TLiquidus Notes • Temperature measuring point on top of the case and on terminals • Max. 2 runs with pause of min. 30 min in between www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 28396 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Vishay BCcomponents Electrolytic capacitor 140 CRH series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 kHz, 125 °C IL2 Max. leakage current after 2 min at UR tan Max. dissipation factor at 100 Hz Z Max. impedance at 100 kHz 220 μF/50 V; ± 20 % Nominal case size: 12.5 mm x 12.5 mm x 13 mm; taped on reel Ordering code: MAL214099111E3 Note • Unless otherwise specified, all electrical values in Table 6 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 6 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 100 kHz 125 °C (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () ORDERING CODE (1) MAL2140... ORDERING CODE (2) MAL2140... 330 470 680 220 330 470 680 1000 2200 3300 3300 4700 150 330 470 680 1000 1000 1500 1500 2200 2200 3300 100 220 330 470 1000 1000 1500 1500 2200 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 8 x 8 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 16 x 16 x 16 18 x 18 x 16 16 x 16 x 21 18 x 18 x 21 18 x 18 x 21 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 180 300 430 180 300 430 750 900 1000 1200 1200 1550 180 430 750 900 1100 1200 1100 1200 1200 1550 1550 180 300 750 900 1100 1200 1200 1200 1550 21 30 43 22 33 47 68 100 220 330 330 470 24 53 75 108 160 160 240 240 352 352 528 25 55 82 117 250 250 375 375 550 0.30 0.30 0.30 0.26 0.26 0.26 0.22 0.22 0.24 0.24 0.26 0.28 0.22 0.22 0.18 0.18 0.18 0.18 0.18 0.18 0.20 0.20 0.22 0.18 0.18 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.40 0.25 0.20 0.40 0.25 0.20 0.12 0.09 0.08 0.06 0.08 0.06 0.40 0.20 0.12 0.09 0.08 0.06 0.08 0.08 0.06 0.06 0.06 0.40 0.25 0.12 0.09 0.08 0.06 0.06 0.08 0.06 97303E3 97301E3 97302E3 97403E3 97401E3 97402E3 97411E3 97412E3 97502E3 97501E3 97511E3 97512E3 97602E3 97601E3 97611E3 97612E3 - 99301E3 99401E3 99411E3 99412E3 99413E3 99414E3 99415E3 99416E3 99511E3 99512E3 99513E3 99514E3 99515E3 99516E3 99517E3 99518E3 99519E3 99601E3 99611E3 99612E3 99613E3 99614E3 99615E3 99616E3 99617E3 Notes Standard reflow soldering profile, see Fig. 4 and Table 4 (2) Advanced reflow soldering profile, according to JEDEC J-STD-020, see Fig. 5 and Table 5 (1) Document Number: 28396 Revision: 09-May-11 For technical questions, contact: [email protected] www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 35 50 63 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 100 kHz 125 °C (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () ORDERING CODE (1) MAL2140... ORDERING CODE (2) MAL2140... 68 8 x 8 x 10 180 24 0.14 0.40 97003E3 - 100 10 x 10 x 10 255 35 0.14 0.25 97001e3 99001E3 150 10 x 10 x 14 317 53 0.14 0.20 97002e3 - 220 12.5 x 12.5 x 13 750 77 0.14 0.12 97011e3 99011E3 330 12.5 x 12.5 x 13 750 115 0.14 0.12 97012e3 99012E3 470 12.5 x 12.5 x 16 900 164 0.14 0.09 97013e3 99013E3 680 16 x 16 x 16 1100 238 0.14 0.08 - 99014E3 820 16 x 16 x 21 1200 287 0.14 0.06 - 99015E3 1000 18 x 18 x 16 1200 350 0.14 0.08 - 99016E3 1200 18 x 18 x 21 1550 420 0.14 0.06 - 99017E3 1500 18 x 18 x 21 1550 525 0.14 0.06 - 99018E3 47 8 x 8 x 10 145 24 0.14 0.70 97103E3 - 68 10 x 10 x 10 205 34 0.14 0.50 97101E3 99101E3 100 10 x 10 x 14 255 50 0.14 0.40 97102E3 - 220 12.5 x 12.5 x 13 750 110 0.12 0.23 97111E3 99111E3 330 12.5 x 12.5 x 16 900 165 0.12 0.18 97112E3 99112E3 470 16 x 16 x 16 900 235 0.12 0.15 - 99113E3 680 16 x 16 x 21 1000 340 0.12 0.13 - 99114E3 680 18 x 18 x 16 1000 340 0.12 0.15 - 99115E3 820 18 x 18 x 16 1000 410 0.12 0.15 - 99116E3 820 18 x 18 x 21 1050 410 0.12 0.13 - 99117E3 1000 18 x 18 x 21 1050 500 0.12 0.13 - 99118E3 10 8 x 8 x 10 145 6.3 0.12 0.70 97805E3 - 22 8 x 8 x 10 145 14 0.12 0.70 97803E3 - 33 8 x 8 x 10 145 21 0.12 0.70 97804E3 - 47 10 x 10 x 10 205 30 0.12 0.50 97801E3 99801E3 68 10 x 10 x 14 255 43 0.12 0.40 97802E3 - 100 12.5 x 12.5 x 13 500 63 0.10 0.25 97811E3 99811E3 220 12.5 x 12.5 x 16 600 138 0.10 0.20 97812E3 99812E3 330 16 x 16 x 16 700 208 0.10 0.18 - 99813E3 330 16 x 16 x 21 750 208 0.10 0.15 - 99814E3 330 18 x 18 x 16 750 208 0.10 0.18 - 99815E3 470 16 x 16 x 21 750 296 0.10 0.15 - 99816E3 470 18 x 18 x 16 750 296 0.10 0.18 - 99817E3 470 18 x 18 x 21 900 296 0.10 0.15 - 99818E3 680 18 x 18 x 21 900 428 0.10 0.15 - 99819E3 Notes (1) Standard reflow soldering profile, see Fig. 4 and Table 4 (2) Advanced reflow soldering profile, according to JEDEC J-STD-020, see Fig. 5 and Table 5 www.vishay.com 8 For technical questions, contact: [email protected] Document Number: 28396 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents Table 7 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Surge voltage for short periods IEC 60384-18, subclause 4.14 Us 1.15 x UR Reverse voltage for short periods IEC 60384-18, subclause 4.16 Urev 1 V After 2 min at UR IL2 0.01 x CR x UR Ø D = 8 mm Typ. 6 nH Ø D = 10 mm Typ. 8 nH Ø D 12.5 mm Typ. 11 nH Voltage Current Leakage current Inductance Equivalent series inductance (ESL) Resistance ESR = tan /2fCR Equivalent series resistance (ESR) at 100 Hz Calculated from tan max. and CR (see Table 6) DISSIPATION FACTOR (tan ) CAPACITANCE (C) 1.2 10 C C0 1 1.1 tan tan0 2 1 1.0 0.9 2 1 Curve 1: 10 V Curve 2: 63 V 0.1 0.8 - 60 - 40 - 20 0 20 C0 = Capacitance at 20 °C, 100 Hz 40 60 80 100 120 Tamb (°C) Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature Document Number: 28396 Revision: 09-May-11 - 60 - 40 - 20 0 20 40 tan δ0 = Typical tan δ at 20 °C, 100 Hz 60 80 100 120 140 Tamb (°C) Fig. 7 - Typical multiplier of dissipation factor (tan ) as a function of ambient temperature For technical questions, contact: [email protected] www.vishay.com 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents EQUIVALENT SERIES RESISTANCE (ESR) 10 ESR ESR0 1 0.1 10 10 2 10 3 10 ESR0 = Typical ESR at 20 °C, 100 Hz 4 5 f (Hz) 10 Tamb = 20 °C Fig. 8 - Typical multiplier of ESR as a function of frequency IMPEDANCE (Z) 10 2 10 2 Curve 1: 100-25-0810 Curve 2: 220-25-1010 Curve 3: 330-25-1213 Curve 4: 470-25-1216 Curve 5: 1000-25-1616 Curve 6: 2200-25-1821 Z (Ω) 100 Curve Curve Curve Curve Curve Curve Curve Z (Ω) 100 1: 2: 3: 4: 5: 6: 7: 22-63-0810 47-63-1010 68-63-1014 100-63-1213 220-63-1216 330-63-1616 680-63-1821 10 10 1 2 3 4 5 6 1 0.1 1 2 3 4 5 6 7 1 0.1 0.01 0.01 10 10 2 10 3 10 4 f (Hz) 10 5 10 10 2 10 3 10 Tamb = 20 °C Fig. 9 - Typical impedance as a function of frequency 4 5 f (Hz) 10 Tamb = 20 °C Fig. 10 - Typical impedance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE Table 8 ENDURANCE TEST DURATION AND USEFUL LIFE MAL214097... NOMINAL CASE SIZE DxL (mm) CASE CODE ENDURANCE AT 125 °C (h) 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 16 18 x 18 x 21 0810 1010 1014 1213 1216 1616 1621 1816 1821 1000 1000 1000 2000 2000 - www.vishay.com 10 USEFUL LIFE USEFUL LIFE ENDURANCE AT 40 °C AT 125 °C AT 125 °C 1.8 x IR APPLIED (h) (h) (h) 1500 150 000 1500 150 000 1000 1500 150 000 3000 300 000 3000 3000 300 000 4000 5000 5000 5000 5000 For technical questions, contact: [email protected] MAL214099... USEFUL LIFE USEFUL LIFE AT 40 °C AT 125 °C 1.8 x IR APPLIED (h) (h) 1500 150 000 3500 350 000 5000 400 000 6000 500 000 6000 500 000 6000 500 000 6000 500 000 Document Number: 28396 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE MBC242 IA 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 Lifetime multiplier 2.8 0 1. 5 1. 2.6 0 2. 0 3. 2.4 0 4. 0 6. 0 8. 2.2 2.0 12 20 1.8 30 1.6 60 1.4 1.2 1.0 0.8 0.5 0.0 0 10 IA = Actual ripple current at 100 kHz IR = Rated ripple current at 100 kHz, 125 °C (1) Useful life at 125 °C and IR applied; see Table 8 0 20 (1) 0 40 40 50 60 70 80 90 100 110 130 Tamb (°C) 120 Fig. 11 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 9 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V TO 25 V UR = 35 V AND 50 V UR = 63 V 50 0.60 0.45 0.40 100 0.70 0.60 0.55 300 0.80 0.75 0.70 1000 0.85 0.85 0.85 3000 0.90 0.90 0.90 10 000 0.95 0.95 0.95 30 000 0.97 0.97 0.97 100 000 1.00 1.00 1.00 Document Number: 28396 Revision: 09-May-11 For technical questions, contact: [email protected] www.vishay.com 11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 CRH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature Table 10 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Mounting IEC 60384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” C/C: ± 5 % tan spec. limit IL2 spec. limit Endurance IEC 60384-18/ CECC 32300, subclause 4.15 Tamb = 125 °C; UR applied; for test duration see Table 8 UR = 6.3 V; C/C: ± 25 % UR 10 V; C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 125 °C; UR and IR applied; for test duration see Table 8 C/C: ± 30 % tan 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-18/ CECC 32300, subclause 4.17 Tamb = 125 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above Reverse voltage IEC 60384-18/ CECC 32300, subclause 4.16 Tamb = 125 °C: 125 h at U = - 0.5 V, followed by 125 h at UR C/C: ± 15 % tan 1.5 x spec. limit IL2 spec. limit www.vishay.com 12 For technical questions, contact: [email protected] Document Number: 28396 Revision: 09-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1