IRF IRHMS53Z60 Radiation hardened power mosfet thru-hole Datasheet

PD-96961A
RADIATION HARDENED
POWER MOSFET
THRU-HOLE (Low-Ohmic TO-254AA)
IRHMS57Z60
JANSR2N7478T1
30V, N-CHANNEL
REF: MIL-PRF-19500/697
5
TECHNOLOGY
™
Product Summary
Part Number Radiation Level RDS(on)
ID
QPL Part Number
IRHMS57Z60 100K Rads (Si) 0.0045Ω 45A* JANSR2N7478T1
IRHMS53Z60 300K Rads (Si) 0.0045Ω 45A* JANSF2N7478T1
IRHMS54Z60
500K Rads (Si)
0.0045Ω 45A*
IRHMS58Z60 1000K Rads (Si) 0.0045Ω 45A*
International Rectifier’s R5 TM technology provides
high performance power MOSFETs for space
applications. These devices have been characterized
for Single Event Effects (SEE) with useful performance
up to an LET of 80 (MeV/(mg/cm2)). The combination
of low RDS(on) and low gate charge reduces the
power losses in switching applications such as DC
to DC converters and motor control. These devices
retain all of the well established advantages of
MOSFETs such as voltage control, fast switching,
ease of paralleling and temperature stability of
electrical parameters.
JANSG2N7478T1
Low-Ohmic
TO-254AA
JANSH2N7478T1
Features:
n
n
n
n
n
n
n
n
n
n
Low RDS(on)
Fast Switching
Single Event Effect (SEE) Hardened
Low Total Gate Charge
Simple Drive Requirements
Ease of Paralleling
Hermetically Sealed
Ceramic Eyelets
Electrically Isolated
Light Weight
Absolute Maximum Ratings
Pre-Irradiation
Parameter
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ T C = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current À
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy Á
Avalanche Current À
Repetitive Avalanche Energy À
Peak Diode Recovery dv/dt Â
Operating Junction
Storage Temperature Range
Lead Temperature
Weight
Units
45*
45*
180
208
1.67
±20
1250
45
20.8
1.08
-55 to 150
A
W
W/°C
V
mJ
A
mJ
V/ns
o
C
300 (0.063 in. /1.6 mm from case for 10s)
9.3 (Typical)
g
* Current is limited by package
For footnotes refer to the last page
www.irf.com
1
04/25/06
IRHMS57Z60, JANSR2N7478T1
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Min
Drain-to-Source Breakdown Voltage
∆BV DSS /∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
g fs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Typ Max Units
Test Conditions
30
—
—
V
VGS = 0V, I D = 1.0mA
—
0.03
—
V/°C
Reference to 25°C, ID = 1.0mA
—
—
0.0045
Ω
VGS = 12V, ID = 45A Ã
2.0
73
—
—
—
—
—
—
4.0
—
10
25
V
S( )
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.8
100
-100
240
60
55
35
175
80
40
—
nC
VDS = VGS, ID = 1.0mA
V DS = 15V, IDS = 45A Ã
VDS = 24V ,VGS = 0V
VDS = 24V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 45A
VDS = 15V
ns
VDD = 15V, ID = 45A
VGS =12V, RG = 2.35Ω
Ω
Parameter
BVDSS
µA
nA
nH Measured from Drain lead (6mm /0.25in.
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Rg
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Internal Gate Resistance
—
—
—
—
8884
4334
270
0.73
—
—
—
—
pF
Ω
VGS = 0V, VDS = 25V
f = 1.0MHz
f = 1.0MHz, open drain
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
ISM
VSD
trr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) À
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
45*
180
1.2
140
350
Test Conditions
A
V
ns
nC
Tj = 25°C, IS = 45A, VGS = 0V Ã
Tj = 25°C, IF = 45A, di/dt ≤ 100A/µs
VDD ≤ 25V Ã
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
Min Typ Max Units
—
—
—
— 0.60
0.21 —
—
48
Test Conditions
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
Pre-Irradiation
IRHMS57Z60, JANSR2N7478T1
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ÄÅ
Parameter
BVDSS
VGS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
Test Conditions
Up to 500K Rads(Si)1 1000K Rads (Si)2 Units
Min
Max
Min
Max
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source Ã
On-State Resistance (TO-3)
Static Drain-to-Source On-State Ã
Resistance (Low-Ohmic TO-254)
Diode Forward Voltage Ã
30
2.0
—
—
—
—
—
4.0
100
-100
10
0.0040
30
1.5
—
—
—
—
—
4.0
100
-100
25
0.0045
nA
µA
Ω
VGS = 0V, ID = 1.0mA
VGS = VDS, I D = 1.0mA
VGS = 20V
VGS = -20 V
VDS= 24V, VGS = 0V
VGS =12V, I D = 45A
—
0.0045
—
0.0050
Ω
VGS =12V, I D = 45A
—
1.2
—
1.2
V
V
VGS = 0V, IS = 45A
1. Part numbers IRHMS57Z60 (JANSR2N7478T1), IRHMS53Z60 (JANSF2N7478T1) and IRHMS54Z60 (JANSG2N7478T1)
2. Part number IRHMS58Z60 (JANSH2N7478T1)
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion
VDS (V)
Range
(µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @V GS=-20V
40
30
30
30
25
15
37
30
30
30
23
15
33
25
25
20
15
8
Energy
(MeV)
261
285
344
VDS
Cu
Br
I
LET
(MeV/(mg/cm2))
28
37
60
35
30
25
20
15
10
5
0
Cu
Br
I
0
-5
-10
-15
-20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHMS57Z60, JANSR2N7478T1
Pre-Irradiation
1000
VGS
TOP
15V
12V
10V
8.0V
6.0V
5.0V
4.5V
BOTTOM 4.0V
100
10
4.0V
1
60µs PULSE WIDTH
Tj = 25°C
0.1
100
4.0V
10
60µs PULSE WIDTH
Tj = 150°C
1
0.1
1
10
100
0.1
VDS, Drain-to-Source Voltage (V)
10
100
Fig 2. Typical Output Characteristics
2.0
RDS(on) , Drain-to-Source On Resistance
(Normalized)
1000
ID, Drain-to-Source Current (A)
1
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
T J = 150°C
100
T J = 25°C
10
VDS = 15V
15 WIDTH
60µs PULSE
1
ID = 45A
1.5
1.0
0.5
VGS = 12V
0.0
4
4.5
5
5.5
6
VGS, Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
4
VGS
15V
12V
10V
8.0V
6.0V
5.0V
4.5V
BOTTOM 4.0V
TOP
ID, Drain-to-Source Current (A)
ID, Drain-to-Source Current (A)
1000
-60 -40 -20
0
20
40
60
80 100 120 140 160
T J , Junction Temperature (°C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
16000
20
100KHz
VGS = 0V,
f = 1 MHz
C iss = C gs + C gd, C ds SHORTED
C rss = C gd
ID = 45A
VGS, Gate-to-Source Voltage (V)
14000
C oss = C ds + C gd
12000
C, Capacitance (pF)
IRHMS57Z60, JANSR2N7478T1
10000
Ciss
8000
Coss
6000
4000
2000
16
12
8
4
FOR TEST CIRCUIT
SEE FIGURE 13
Crss
0
0
1
10
100
0
40
VDS, Drain-to-Source Voltage (V)
80
120 160 200 240 280 320
QG, Total Gate Charge (nC)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
1000
ID, Drain-to-Source Current (A)
1000
ISD, Reverse Drain Current (A)
VDS = 24V
VDS = 15V
100
T J = 25°C
TJ = 150°C
10
1
OPERATION IN THIS AREA
LIMITED BY R DS(on)
100µs
100
1ms
Tc = 25°C
Tj = 150°C
Single Pulse
VGS = 0V
10ms
10
0.1
0.0
0.4
0.8
1.2
VSD , Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
1.6
0
1
10
100
VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
5
IRHMS57Z60, JANSR2N7478T1
Pre-Irradiation
160
RD
VDS
LIMITED BY PACKAGE
ID , Drain Current (A)
VGS
D.U.T.
RG
120
+
-V DD
VGS
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
80
Fig 10a. Switching Time Test Circuit
40
VDS
90%
0
25
50
75
100
125
150
TC , Case Temperature ( °C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
1
Thermal Response ( Z thJC )
D = 0.50
0.20
0.1
0.10
0.05
P DM
0.02
0.01
0.01
t1
t2
SINGLE PULSE
( THERMAL RESPONSE )
0.001
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
0.0001
1E-006
1E-005
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHMS57Z60, JANSR2N7478T1
15V
EAS , Single Pulse Avalanche Energy (mJ)
4000
ID
20.1A
28.5A
BOTTOM 45A
TOP
3200
L
VDS
DRIVER
2400
D.U.T.
RG
IAS
VGS
20V
+
- VDD
0.01Ω
tp
Fig 12a. Unclamped Inductive Test Circuit
A
1600
800
0
25
V(BR)DSS
50
75
100
125
150
°
Starting TJ , - Junction Temperature (°C)
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
I AS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12V
.2µF
.3µF
12 V
QGS
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
D.U.T.
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
7
IRHMS57Z60, JANSR2N7478T1
Pre-Irradiation
Footnotes:
à Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
Ä Total Dose Irradiation with VGS Bias.
À Repetitive Rating; Pulse width limited by
maximum junction temperature.
Á VDD = 25V, starting TJ = 25°C, L= 1.1 mH
Peak IL = 45A, VGS = 12V
 I SD ≤ 45A, di/dt ≤ 150A/µs,
VDD ≤ 30V, TJ ≤ 150°C
12 volt V GS applied and VDS = 0 during
irradiation per MIL-STD-750, method 1019, condition A.
Å Total Dose Irradiation with VDS Bias.
24 volt V DS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions — Low-Ohmic TO-254AA
0.12 [.005]
13.84 [.545]
13.59 [.535]
3.78 [.149]
3.53 [.139]
6.60 [.260]
6.32 [.249]
A
20.32 [.800]
20.07 [.790]
17.40 [.685]
16.89 [.665]
1
C
2
2X
B
3
>@
>@
3X
3.81 [.150]
13.84 [.545]
13.59 [.535]
1.27 [.050]
1.02 [.040]
>@
0$;
1.14 [.045]
0.89 [.035]
0.36 [.014]
3.81 [.150]
B A
127(6
1.
2.
3.
4.
DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994.
ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES].
CONTROLLING DIMENSION: INCH.
CONFORMS TO JEDEC OUTLINE TO-254AA.
PIN ASSIGNMENTS
1 = DRAIN
2 = SOURCE
3 = GATE
CAUTION
BERYLLIA WARNING PER MIL-PRF-19500
Package containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them
which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids that
will produce fumes containing beryllium.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 04/2006
8
www.irf.com