4 ITEM 3 CONNECTOR PART NO. 2 IPI CHECK DESCRIPTION 1 See Table 1 KR CONNECTOR 2 UL1061, 26 AWG BLUE 1 EOR CHECK Applicable Tooling BCD TABLE 1 ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D NUMBER OF CIRCUITS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONNECTOR PART NO. 02KR-6S-P 03KR-6S-P 04KR-6S-P 05KR-6S-P 06KR-6S-P 07KR-6S-P 08KR-6S-P 09KR-6S-P 10KR-6S-P 11KR-6S-P 12KR-6S-P 13KR-6S-P 14KR-6S-P 15KR-6S-P 16KR-6S-P ASSEMBLY PART NUMBER A02KR02KR26E51A A03KR03KR26E51A A04KR04KR26E51A A05KR05KR26E51A A06KR06KR26E51A A07KR07KR26E51A A08KR08KR26E51A A09KR09KR26E51A A10KR10KR26E51A A11KR11KR26E51A A12KR12KR26E51A A13KR13KR26E51A A14KR14KR26E51A A15KR15KR26E51A A16KR16KR26E51A TOTAL WIRE REQUIRED 101.6 mm 152.4 mm 203.2 mm 254 mm 304.8 mm 355.6 mm 406.4 mm 457.2 mm 508 mm 558.8 mm 609.6 mm 660.4 mm 711.2 mm 762 mm 812.8 mm (61.1 +/- 3.0) C C 50.8 +/- 3.0 1 1 PIN 1 2.0 PIN 1 D 2 B B SCALE 1: 1 DIMENSIONS CUSTOMER NAME All dimensions are in MM with a tolerance of +/- 3.0 unless otherwise specified. A DRAWN BY A DESCRIPTION 2.0 mm Pitch KR Standard Catalog Assembly - 2" Overall Len gth – Pin out: 1 to 1 ASSEMBLY PART NO. STEVEN PILKINGTON REV. DESCRIPTION 4 DATE 3 BY CUSTOMER PART NO. CHECK ED BY SEE TABLE 1 DRAWING NO. & REVISION JUSTIN BAKER 2 REVISED GAM-022 2/26/2016 1