300-600 VOLTS HDS10U30x Thru HDS10U60x 10 AMPERES Switchmode Full Plastic Dual Ultrafast Power Rectifiers …Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ITO-220AB FEATURES • • • • • • • • High Surge Capacity Low Power Loss, High efficiency Glass Passivated chip junctions 150℃ Operating Junction Temperature Low Stored Charge Majority Carrier Conduction Low Forward Voltage , High Current Capability High-Switching Speed 50 & 75 Nanosecond Recovery Time Plastic Material used Carries Underwriters Laboratory 1 2 3 Maximum Ratings Symbol Parameter VRRM Peak Repetitive Reverse Voltage VRWM Working Peak Reverse Voltage VR DC Blocking Voltage VR(RMS) R.M.S Reverse Voltage IF(AV) Average Rectifier Forward Current - Total Device (Rated VR), TC=100℃ IFM Value Units 30 40 50 60 300 400 500 600 V 210 280 350 420 V 5.0 A 10 A Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz, TC=125℃) 10 A IFSM Non-Repetitive Peak Surge Current (Surge applied at rate load conditions half ware, single phase, 60Hz) 100 A TJ, TSTG Operating and Storage Temperature Range -65 to +150 ℃ Electrial Characteristics Symbol Parameter VF Maximum Instantaneous Forward Voltage - ( IF =5.0 Amp TC = 25℃) - ( IF =5.0 Amp TC = 100℃) IR Maximum Instantaneous Reverse Current - ( Rated DC Voltage, TC = 25℃) - ( Rated DC Voltage, TC = 125℃) Trr Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) CP Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) Value 30 40 50 1.30 1.16 70 60 1.50 1.38 Units V 5.0 200 uA 50 ns 60 pF ◎ SEMIHOW REV.A0,Nov 2010 HDS10U30x Thru HDS10U60x JAN 2010 NSTANTANEOUS FORWARD CURRENT [Amp] AVERAGE FORWARD RECTIFIED CURRENT [Amp] CASE TEMPERATURE [℃] 10U50-10U60 FORWARD VOLTAGE [V] Figure 1. Forward Current Derating Curve 10U30-10U40 Figure 2. Typical Forward Characterisitics JUNCTION CAPACITANCE [pF] INSTANTANEOUS REVERSE CURRENT [mA] 10U30-10U40 10U50-10U60 10U30-10U40 10U50-10U60 REVERSE VOLTAGE [V] Figure 4. Typical Junction Capacitance PEAK FORWARD SURGE CURRENT [Amp] Figure 3. Typical Reverse Characterisitics REVERSE VOLTAGE [V] NUMBER OF CYCLES AT 60 Hz Figure 5. Peak Forward Surge Current ◎ SEMIHOW REV.A0,Nov 2010 HDS10U30x Thru HDS10U60x Typical Characteristics Set time base for 10/20 ns/cm Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram Package Dimension ITO-220AB DIM MILLIMETERS MIN MAX A 15.05 15.15 B 13.35 13.45 C 10.00 10.10 D 6.55 6.65 E 2.65 2.75 F 1.55 1.65 G 1.15 1.25 H 0.55 0.65 I 2.50 2.60 J 3.00 3.20 K 1.10 1.20 L 0.55 0.65 M 4.40 4.60 N 1.15 1.25 P 2.65 2.75 O 3.35 3.45 Q 3.15 3.25 ◎ SEMIHOW REV.A0,Nov 2010 HDS10U30x Thru HDS10U60x Typical Characteristics