Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company PNP SILICON PLANAR EPITAXIAL TRANSISTORS BC559, B, C BC560, B, C TO-92 Plastic Package Low Noise Transistors ABSOLUTE MAXIMUM RATINGS(Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL BC559 BC560 UNITS Collector Emitter Voltage VCEO 30 45 V Collector Base Voltage VCBO 30 50 V Emitter Base Voltage VEBO 5 5 V Collector Current Continuous IC 100 mA Power Dissipation @ Tc=25ºC Derate Above 25ºC Power Dissipation @ Tc=25ºC Derate Above 25ºC Operating And Storage Junction Temperature Range PD Tj, Tstg 625 5 1.5 12 -55 to +150 mW mW/ºC W mW/ºC ºC THERMAL RESISTANCE Junction to ambient Rth(j-a) 200 ºC/W Junction to case Rth(j-c) 83.3 ºC/W Continental Device India Limited PD Data Sheet Page 1 of 5 PNP SILICON PLANAR EPITAXIAL TRANSISTORS BC559, B, C BC560, B, C TO-92 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION Collector Emitter Voltage IC=10mA,IB=0 VCEO BC559 BC560 MIN TYP MAX UNITS 30 45 V V Collector Base Voltage VCBO IC=10µA,IE=0 30 50 V V Emitter Base Voltage VEBO IE=10µA, IC=0 5 V Collector Cut off Current ICBO VCB=30V, IE = 0 15 nA VCB=30V, IE = 0 Ta= +125ºC 5 µA VCE=40V, IC =0 15 nA BC559 BC560 IEBO Emitter Cut off Current DC Current Gain B C VCE=5V,IC=10uA 100 100 B C BC559, BC560 VCE=5V,IC=2mA 180 380 120 460 800 800 Collector Emitter Saturation Voltage VCE(sat) IC=10mA,IB=0.5mA 0.25 V IC=100mA,IB=see note 1 0.6 V IC=100mA,IB=5mA* Continental Device India Limited Data Sheet 0.25 V Page 2 of 5 PNP SILICON PLANAR EPITAXIAL TRANSISTORS BC559, B, C BC560, B, C TO-92 Plastic Package DESCRIPTION SYMBOL TEST CONDITION MIN TYP MAX UNITS Base Emitter Saturation Voltage VBE(sat) IC=100mA,IB=5mA* 1.1 V Base Emitter On Voltage VBE(on) IC=10uA,VCE=5V IC=100uA,VCE=5V IC=2mA,VCE=5V 0.52 0.55 0.70 V V V MAX UNITS 0.55 ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Otherwise Specified) DESCRIPTION DYNAMICS CHARACTERISTICS Transition Frequency SYMBOL TEST CONDITION fT IC=10mA, VCE=5V f=100MHz Collector Base Capacitance Ccbo VCB =10V, IE =0, f =1MHz Noise Figure NF1 VCE =5V,IC=200uA RS=2KW,f=30HZ To 15KHz VCE =5V,IC=200uA RS=100KW,f=1.0KHZ f=200Hz NF2 MIN TYP 250 MHz 2.5 pF 2.0 dB 10 dB Small Signal Current Gain B C Continental Device India Limited | hfe | VCE =5V,IC=2mA f=1kHZ Data Sheet 240 450 500 900 Page 3 of 5 BC559, B, C BC560, B, C TO-92 Plastic Package TO-92 Plastic Package B A Uncontrolled Ammo Pack 1 K 2 All dimensions in mm unless specified otherwise D 3 D A A C H F 3 2 1 2 1 SEC AA G F 3 E Beyond 'L' Solderability Ensured L Dimension With 'L' TO-92 Transistors on Tape and Ammo Pack PIN CONFIGURATION 1. EMITTER 2. BASE 3. COLLECTOR DIM MIN. MAX. A B C D 4.32 4.45 3.18 0.41 5.33 5.20 4.19 0.55 E F G H 0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 K L 12.70 1.982 All diminsions in mm. — 2.082 ITEM SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH A1 A T P Po FEED HOLE CENTRE TO COMPONENT CENTRE P2 DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION F h W Wo W1 HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCEF1, W2 Ho H1 L Do t F2 CLINCH HEIGHT PULL - OUT FORCE H2 (P) SPECIFICATION REMARKS MIN. NOM. MAX. TOL . 4.0 4.8 5.2 4.8 4.2 3.9 12.7 ±1 12.7 ±0.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH 6.35 ±0.4 TO BE MEASURED AT BOTTOM OF CLINCH +0.6 5.08 -0.2 1 0 AT TOP OF BODY 18 ±0.5 6 ±0.2 9 +0.7 -0.5 0.5 ±0.2 16 ±0.5 23.25 11.0 4 ±0.2 1.2 t1 0.3 - 0.6 2.54 +0.4 -0.1 3 6N NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS ARE PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES ARE REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. Notes BC559, B, C BC560, B, C TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-579 6150 Fax + 91-11-579 9569, 579 5290 www.cdil.com e-mail [email protected] Continental Device India Limited Data Sheet Page 5 of 5