Miniature Aluminum Electrolytic Capacitors NRB-XG Series HIGH RIPPLE CURRENT, RADIAL LEADS, POLARIZED, ALUMINUM ELECTROLYTIC FEATURES • LONG LIFE AT 105°C (8,000 HOURS) • HIGH VOLTAGE (UP TO 400V) • REDUCED SIZE & HIGH RIPPLE CURRENT RoHS Compliant includes all homogeneous materials *See Part P Number N b System S for f Details D il CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance W.V. (Vdc) S.V. (Vdc) Tan δ W.V. (Vdc) Z-25°C/Z+20°C Z-40°C/Z+20°C Test 200 ~ 400Vdc 1.5 ~ 27μF -40°C ~ +105°C ±20% (M) CV < 1,000 CV > 1,000 0.1CV + 40μA after 1 minutes 0.04CV + 100μA after 1 minutes 0.03CV + 15μA after 5 minutes 0.02CV + 25μA after 5 minutes 200 400 250 450 0.20 0.25 200 400 3 6 8 16 8,000 Hours Capacitance Change Within ±20% of initial measured value Tan δ Less than 200% of specified value Leakage Current Less than specified value Maximum Leakage Current at 20°C Max. Tan δ at 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Hours Load Life Test at Rated W.V. & 105°C PART NUMBER SYSTEM NRB-XG 100 M 200V 8X11.5 TB F RoHS Compliant TB = Tape & Box* Case Size (mm) Working Voltage Tolerance Code M=20% Capacitance Code in μF Series *see tape specification for details PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Miniature Aluminum Electrolytic Capacitors NRB-XG Series STANDARD PRODUCT, SPECIFICATIONS AND CASE SIZES D φ x L (mm) Part Number NRB-XG4R7M200V6.3X11F NRB-XG5R6M200V6.3X11F NRB-XG6R8M200V6.3X11F NRB-XG8R2M200V8X11.5F NRB-XG100M200V8X11.5F NRB-XG120M200V8X11.5F NRB-XG150M200V8X16F NRB-XG150M200V10X12.5F NRB-XG180M200V10X12.5F NRB-XG220M200V10X16F NRB-XG270M200V10X16F NRB-XG1R5M400V6.3X11F NRB-XG1R8M400V6.3X11F NRB-XG2R2M400V6.3X11F NRB-XG2R7M400V8X11.5F NRB-XG3R3M400V8X11.5F NRB-XG3R9M400V8X11.5F NRB-XG4R7M400V8X16F NRB-XG4R7M400V10X12.5F NRB-XG5R6M400V10X12.5F NRB-XG6R8M400V10X16F NRB-XG8R2M400V10X16F Cap. (μF) 4.7 5.6 6.8 8.2 10 12 15 15 18 22 27 1.5 1.8 2.2 2.7 3.3 3.9 4.7 4.7 5.6 6.8 8.2 W.V. Dissipation Factor LC (μA) (Vdc) +20°C/120Hz after 5 min. 0.2 43.2 0.2 47.4 0.2 52.2 0.2 57.8 0.2 65 200 0.2 73 0.2 85 0.2 85 0.2 97 0.2 113 0.2 133 0.25 33 0.25 36.6 0.25 41.4 0.25 46.6 0.25 51.4 400 0.25 56.2 0.25 62.6 0.25 62.6 0.25 69.8 0.25 79.4 0.25 90.6 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency (Hz) 1.5μF ~ 27 μF 120 1.0 1K 1.7 10K 2.2 Ripple Current Rating (Arms) +105°C/120Hz 56 60 68 96 104 112 144 148 164 200 208 36 38 40 60 64 68 88 92 100 120 128 Max. ESR (Ω) 120Hz 70.6 59.2 48.8 40.5 33.2 27.6 22.1 22.1 18.4 15.1 12.3 276.5 230.4 188.5 153.6 125.7 106.3 88.2 88.2 74.0 61.0 50.6 Load Life Hours @+105°C 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 DIAMETER AND LEADSPACE (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α Dim. β 100K 2.5 6.3 0.5 2.5 0.5 2.0 8.0 0.6 3.5 0.5 2.0 10 0.6 5.0 0.5 2.0 DIMENSIONS (mm) Top Vent Polarity Marking PET Sleeve dφ ± 0.05 + F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α Drawing is representative of parts as supplied in bulk or straight lead format, please see taping specification for details on taped format packaging. 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Miniature Aluminum Electrolytic Capacitors NRB-XG Series STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB Taping Dimensions (mm) Case Dia. 6.3 (Dφ) Case Size 6.3x11 Dim. dφ ±0.05 0.5 H ±0.75 F +0.8 ~ -0.2 P P0 8 20.0 P1 3.85 ±0.5 (at end of tape) P 6.35 ±1.0 W 18.0 ±0.5 W0 11.5 min. W 9.0 ±0.5 W2 0 ~ 2.5 H 0 I D φ 0 16.0 ±0.5 1.0 max. 4.0 ±0.2 Δh t ∅D 0.6 5.0 -02 ~ +0.8 12.7 ±1.0 12.7 ±0.2 1 P 8x11.5 18.5 2 P2 w2 P1 F ∅d W w0 w H0 H 1.0 Δh S ∅D 0 P0 1max 0 ±1.0 (at top of can) 0.7 ±0.2 (not including lead) t SPECIAL STRAIGHT LEAD TAPING TBST* Taping Dimensions (mm) Δh Case Dia. (Dφ) Case Size Dim. dφ ±0.05 6.3 8 6.3x11 8x11.5 0.5 0.6 H ±0.75 18.5 20.0 F +0.8 ~ -0.2 2.5 3.5 P ±1.0 12.7 ±0.2 P0 P 1 12.7 ±0.2 5.1 4.6 P 6.35 ±1.0 W 18.0 ±0.5 W0 11.5 min. W 9.0 ±0.5 W 0 ~ 2.5 H 16.0 ±0.5 2 1 2 0 I D0φ 1max P2 t P ∅D w2 1.0 max. w 4.0 ±0.2 Δh 0 ±1.0 (at top of can) t 0.7 ±0.2 (not including lead) P1 F ∅d W1 w0 H 1.0 P0 S ∅ D0 *Straight leads will extend from the based of the component to the edge of the carrier. The section of lead below the adhesive tape may be straight or formed. NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Miniature Aluminum Electrolytic Capacitors NRB-XG Series RADIAL TAPING (5mm LEAD SPACING) TB Taping Dimensions (mm) Case Dia. (Dφ) Case Size Dim. 10 dφ 0.6 ± 0.05 H 18.5 +0.75/-0.5 F 5.0 +0.8/-0.2 P 12.7 ± 1.0 P0 12.7 ±0.2 P 3.85 P 6.35 ± 1.0 W 18.0 ± 0.5 W 11.5 min W 9.0 ± 0.5 W 0 ~ 2.5 1 2 0 1 2 H 0 Δh All 16.0 ± 0.5 I 1.0 max. D φ 0 4.0 ± 0.2 Δh 0 ±1.0 (at top of can) t 0.7 ± 0.2 (not including lead) 1max t P P2 ∅D w2 P1 ∅d F W1 w w0 H 1.0 P0 S ∅ D0 NOTE: ANODE (+) LEAD FEEDS OFF FIRST. FOR OPTION OF NEGATIVE (_) LEAD FIRST, SPECIFY “TBN”. 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com