HGN-365A IEC 60320 INLET SOCKET WITH SINGLE OR DOUBLE FUSE HOLDER, SNAP-IN OR FLANGE MOUNT MECHANICAL DIMENSIONS (Unit: mm) SNAP-IN 30.8 28.5 28.3 31.0 33.0 35.0 32.3 Use only with a 250V Fuse SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT) THICKNESS OF PANEL IS FROM 1.00mm to 1.6mm 42.6 FEATURES 48.5 (58.4) The HGN-365A filter series offers a wide variety of options with a current rating up to 10A, 250VAC. This power entry module offers industry standard 5 x 20mm fuse/s with IEC 6.3 connector. This series offers an option of having a single or 31.0 27.8 double fuse in the same package. These filters are also used for health care equipment and offer extremely low leakage FLANGE MOUNT current to comply with UL544 & 2602. A Ground Choke can be added to enhance the grounding 36.0 28.0 Max 28.3 ability of the circuit. A bleeder resistor can also be added to prevent excessive voltages from developing across the filter 2x 6 capacitors when there is no load. 33.0 APPLICATIONS 31.0 Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, 2x 3.6 32.4 Typ. 2x Use only with a 250V Fuse 3.6 36.0 44.0 RECOMMENDED PANEL CUTOUT (MOUNTING FROM FRONT) Switching power supplies, other electronic equipment. TECHNICAL DATA • Rated Voltage: 115/250VAC • Rated Current: 1A, 2A, 3A, 4A, 6A, 8A, 10A • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 115VAC 60Hz: 0.5mA @ 250VAC 50Hz: 1.0mA @ 115VAC 60Hz: 2µA* @ 250VAC 50Hz: 5µA* • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C * Medical application (58.4) 48.5 42.6 6.3 31.0 27.8 Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords. Panel Thickness 1mm to 1.6mm 70 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com HGN-365A Series Example & Ordering Code HGN-365A 01 Q - 1 01 02 03 04 06 08 10 R N L mH =S Lg 2 L =W 2 FUSE (5X20MM) R =1 = 2✝ NO BLEEDER RESISTOR & NO GROUND CHOKE BLEEDER RESISTOR (1/4 W, 1M) BLEEDER RESISTOR (1/2 W, 1M) BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE GROUND CHOKE (100µH) COMPONENT LOCATIONS: G' Cy N' Fuse L mH Lg = = = = = = 3 0 5 6 7 8 9 STANDARD TYPE WITH C(X) & C(Y) BEHIND L WITHOUT C(X); C(Y) ONLY WITHOUT C(Y); C(X) ONLY WITHOUT C(Y); C(X) BEHIND L L Cy L L mH Lg 1 2✢ 3✢ 1M 2M✢ 10A (mH) 0.2 0.3 0.3 * 0.3 0.3 0.3 * 0.2 Cy L' G' N' Fuse G = = = = = MEDICAL SCHEMATICS 1M A B C D E F G H I J K R N M1 M2 M3 M4 M5 M6 M7 M8 M9 CX L' L N' Fuse G L mH G' Lg 2M L L mH Fuse R N = = = = = = = = = L mH Fuse L LINE = = = = = = = = = = = LINE Medical applications, select Attenuation code with corresponding component values from the table. 8A (mH) 1.05 * * * * * 1.05 * * L mH Fuse R N 1A (mH) 2A (mH) 3A (mH) 4A (mH) 6A (mH) 8A (mH) 10A (mH) 6.5 3.8 2.5 1.6 0.8 1.05 0.2 1.9 1.5 1.1 0.8 0.6 * 0.3 3.7 2.7 1.8 1.3 0.8 1.05 0.3 10.5 4.2 2.5 1.7 1.05 * 0.3 4.6 3.4 2.5 1.4 0.9 * 0.3 9.5 4.3 1.8 1.2 0.85 * 0.3 6.5 4.0 2.5 2.0 0.85 1.05 0.3 6.5 4.0 2.5 2.0 0.85 1.05 0.3 10.5 4.0 1.2 0.9 0.53 * 0.3 5 3.7 1.8 1.1 0.6 * 0.2 10.5 6.5 2.5 2.7 1.05 * 0.3 4A (mH) 6A (mH) 1.6 0.8 0.8 0.6 1.3 * 1.7 * 1.4 0.9 1.2 0.85 2.0 0.8 0.9 0.53 1.1 0.6 L' Cy CX L G ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. 2A (mH) 3A (mH) 3.8 2.5 1.5 1.1 2.7 1.8 4.2 * 3.4 2.5 4.3 1.8 4.0 2.5 4.0 1.2 3.7 * L mH Fuse LOAD SOLDER 1 FUSE (5X20MM) 1A (mH) 6.5 1.9 3.7 * 4.6 9.5 6.5 10.5 5.0 N' Fuse LINE FUSE OPTION: Cap C(x) 0.1µF 0.015µF 0.1µF 0.1µF 0.047µF 0.033µF 0.22µF 0.047µF 0.033µF G' Cy LOAD =Q WIRE Cap C(y) 2200pF 3300pF 3300pF 1000pF 3300pF 3300pF 2200pF 3300pF 2200pF 2200pF * L LOAD 6.6 QUICK CONNECT N Cap C(x) 0.1µF 0.015µF 0.1µF 0.1µF 0.047µF 0.033µF 0.22µF 0.22µF 0.047µF 0.033µF * L' Cy CX Fuse G L L' LOAD 2.0 -3.0L UL 1015, 18AWG STRANDED, 4” OPTIONS: L mH Fuse LOAD L G 8.0 4.0/0.187 SCHEMATICS 1 3.0 -3.6L 6.3/0.25 S LINE TERMINAL: = = = = = = = A LINE CURRENT RATING (A): 5 - 1 CX N' L mH G' Lg Contact PDI for attenuation numbers Flange mount only *Contact PDI for availability ✢ ✝ TYPE OF MOUNTING: FLANGE MOUNT = BLANK * VDE submitted SNAP-IN TABS - TOP BOTTOM =T SNAP-IN TABS - SIDE =S 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com 71 HGN-365A Series Example & Ordering Code Non-Medical Applications Medical Applications ❖ ✧ Insertion loss in dB (50 Ohm circuit) Insertion loss in dB (50 Ohm circuit) Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 34 38 40 32 26 11 8 25 37 71 62 12 1A 29 32 55 48 49 51 8 23 34 68 64 14 2A 28 36 39 45 48 39 8 19 27 58 65 15 3A 22 27 30 48 54 47 8 19 28 66 72 34 4A 18 24 28 44 50 47 8 18 26 43 51 31 6A 20 26 30 44 47 40 8 18 24 65 59 22 8A 8 14 18 33 41 39 8 18 25 29 38 31 10A 25 31 33 30 25 14 1 4 12 50 64 16 1A 24 28 20 53 54 55 1 4 13 53 57 16 2A 19 22 24 27 27 22 1 3 8 48 59 31 3A 23 27 32 54 49 42 1 4 8 40 52 25 4A 15 24 30 44 52 40 1 4 8 36 52 28 6A 11 18 23 39 49 37 1 4 8 26 46 24 10A 29 33 47 53 57 41 8 23 35 73 58 14 1A 28 37 44 52 56 41 8 19 27 74 59 17 2A 25 33 46 53 57 44 8 19 29 63 62 13 3A 19 24 27 43 53 38 8 18 25 57 60 32 4A 19 29 36 49 55 46 8 18 23 50 54 24 6A 20 24 26 27 25 15 8 18 24 58 57 21 8A 11 19 24 41 53 36 8 18 24 51 46 25 10A 36 41 41 49 49 46 8 23 33 62 62 32 1A 36 41 41 49 49 46 8 23 33 62 62 32 2A 28 35 37 41 42 42 8 19 28 56 57 17 3A 19 23 24 40 45 42 8 18 26 50 55 33 4A 21 28 31 41 44 41 8 18 25 45 48 29 6A 12 16 19 45 37 41 8 18 24 52 53 30 10A 32 39 55 55 56 52 3 14 25 75 63 24 1A 29 34 46 56 58 49 3 15 27 67 59 21 2A 28 38 44 51 58 39 3 12 20 66 57 18 3A 20 26 30 51 59 47 3 11 18 49 54 29 4A 18 25 31 49 56 47 3 11 17 55 59 32 6A 11 19 24 40 50 40 3 12 17 48 46 29 10A 40 32 44 52 55 38 2 18 30 66 56 22 1A 32 39 56 56 58 58 1 10 21 76 62 23 2A 23 29 35 53 52 40 1 9 17 66 65 33 3A 20 25 29 50 60 45 1 8 15 53 60 32 4A 19 29 35 51 54 49 2 8 13 47 57 28 6A 11 19 25 40 51 39 2 9 14 46 51 29 10A 37 43 52 47 46 45 17 35 47 65 58 34 1A 36 25 30 54 51 45 16 31 41 51 61 15 2A 28 36 39 46 49 52 15 26 36 58 63 17 3A 24 29 33 45 45 50 15 27 36 59 62 23 4A 18 24 28 42 48 39 15 26 33 48 58 26 6A 20 26 30 45 48 38 15 26 34 45 55 20 8A 10 20 25 38 44 38 15 26 33 33 44 28 10A 37 19 53 51 51 41 17 35 47 68 57 34 1A 38 23 33 57 55 48 15 31 42 59 64 15 2A 28 37 45 48 50 55 15 26 35 64 62 16 3A 25 30 39 47 49 41 15 26 36 61 53 20 4A 18 25 31 45 51 40 15 26 33 51 57 27 6A 20 28 34 51 53 41 15 26 33 50 58 21 8A 10 19 23 35 42 35 15 26 33 36 46 29 10A 38 42 42 25 25 20 4 22 34 59 65 21 1A 32 39 56 56 58 58 1 10 21 76 62 23 2A 20 25 28 44 49 42 3 12 19 61 57 27 3A 18 23 28 44 49 42 3 11 17 50 62 30 4A 14 19 22 39 48 41 3 11 17 48 50 33 6A 11 17 22 36 42 38 3 11 17 39 55 27 10A 32 34 52 44 44 41 1 14 25 60 66 21 1A 29 32 56 49 50 45 1 12 24 67 62 14 2A 23 27 30 49 52 46 1 9 17 59 69 30 3A 19 23 27 44 51 42 1 8 15 67 58 33 4A 16 20 24 42 51 42 1 8 14 58 52 33 6A 11 17 22 36 41 40 2 8 14 37 54 27 10A 36 42 43 37 31 36 1 2 5 17 23 33 1A 30 37 39 29 22 27 1 1 3 14 21 13 2A 28 35 37 28 22 31 1 1 2 11 18 12 3A 28 35 37 28 22 26 1 1 1 11 17 10 4A 21 29 32 31 27 17 1 1 1 7 12 23 6A 11 16 18 18 17 14 1 1 1 5 13 9 10A Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 34 38 39 32 16 21 9 26 37 62 51 11 1A 29 32 34 30 19 16 8 23 34 60 48 13 2A 28 35 37 28 22 19 8 19 28 52 44 12 3A 22 26 27 30 30 28 8 20 29 57 52 33 4A 18 22 24 27 25 18 8 18 26 52 45 27 6A 20 24 26 27 25 14 8 18 26 43 40 17 8A 8 13 15 17 16 14 8 18 25 32 28 24 10A 25 31 33 30 24 21 1 5 14 41 46 17 1A 23 27 28 29 24 23 1 5 14 45 58 15 2A 19 22 24 27 27 20 1 4 10 39 50 34 3A 19 26 29 28 25 15 1 4 9 32 42 25 4A 15 21 24 23 21 17 1 4 9 30 49 28 6A 11 16 18 17 16 12 1 4 8 26 45 24 10A 29 33 34 30 20 16 8 24 35 58 45 15 1A 28 35 37 28 22 24 8 20 29 61 48 15 2A 25 33 58 51 56 41 8 20 30 57 47 13 3A 19 23 24 27 27 21 8 19 27 47 45 30 4A 11 16 18 18 16 12 8 18 24 47 36 24 10A 31 37 39 35 29 22 8 22 32 66 55 22 2A 19 23 24 27 27 22 8 19 27 50 47 30 4A 32 37 40 35 29 23 3 15 25 74 58 21 1A 29 33 34 30 16 21 3 16 27 57 50 20 2A 28 35 37 28 22 23 3 13 22 59 48 16 3A 20 24 25 28 28 21 3 12 20 43 44 27 4A 18 23 25 27 26 20 3 12 19 48 49 30 6A 11 16 18 18 17 14 3 11 17 42 38 27 10A 37 41 41 25 41 17 2 19 31 62 46 21 1A 32 37 40 36 30 22 1 11 22 63 59 24 2A 23 27 28 31 30 30 1 10 19 61 52 32 3A 19 23 24 27 27 20 1 9 17 44 47 31 4A 19 26 29 29 25 17 1 8 15 39 45 25 6A 11 16 18 18 17 14 2 8 14 42 34 25 10A 37 44 41 23 31 18 17 35 47 54 42 32 1A 32 42 42 32 20 17 16 31 42 53 47 14 2A 28 34 36 29 23 22 15 27 37 52 49 13 3A 24 28 29 26 19 10 15 27 38 52 45 19 4A 15 22 24 25 23 19 15 26 35 43 41 23 6A 20 24 26 27 25 13 15 26 36 38 37 18 8A 10 18 20 20 18 13 15 26 34 34 31 23 10A 38 42 42 25 44 17 4 22 33 52 42 20 1A 31 37 40 36 29 25 3 15 25 80 60 25 2A 20 24 25 26 24 23 20 24 25 26 24 23 3A 18 22 24 27 25 18 3 11 18 48 48 28 4A 14 17 19 22 22 19 3 11 18 43 35 29 6A 32 36 37 28 19 11 1 14 26 53 42 16 1A 29 33 34 31 20 17 1 13 24 61 50 14 2A 19 22 24 27 27 18 1 8 16 55 42 32 4A 16 19 21 24 24 21 2 8 15 56 38 33 6A 11 16 18 18 17 14 2 8 14 41 34 25 10A A M1 M2 B M3 C M4 M5 D M6 E M7 F M8 G M9 H ✧ This table applies to schematic 1M only. Visit our website or contact PDI for other schematic attenuation numbers. I J K 72 This table applies to schematic 1 only. Visit our website or contact PDI for other schematic attenuation numbers. ❖ 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com