DTA143ZM / DTA143ZE DTA143ZUA / DTA143ZCA / DTA143ZSA PNP Digital Transistors (Built-in Resistors) Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. Only the on/off conditions need to be set for operation, making device design easy. DTA143ZE (SOT-523) DTA143ZUA(SOT-323) Addreviated symbol：E13 Addreviated symbol：113 DTA143ZM (SOT-723) DTA143ZCA (SOT-23) Addreviated symbol：E13 Addreviated symbol：E13 EQUIVALENT CIRCUIT DTA143ZSA (TO-92S) ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise noted) Parameter Symbol Limits (DTA143Z□) M E UA CA SA Unit Supply Voltage VCC -50 V Input voltage VIN -30 ~ 5 V Output current IO -100 mA Power dissipation PD Junction & Storage temperature http://www.SeCoSGmbH.com/ 07-May-2012 Rev. B TJ, TSTG 100 150 200 150, -55~150 300 mW °C Any changes of specification will not be informed individually. Page 1 of 2 DTA143ZM / DTA143ZE DTA143ZUA / DTA143ZCA / DTA143ZSA PNP Digital Transistors (Built-in Resistors) Elektronische Bauelemente ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Symbol Min. Typ. Max. VI(off) -0.5 - - VI(on) - - -1.3 VO(on) - - -0.3 V II - - -1.8 mA VI= -5V IO(off) - - -0.5 μA VCC= -50V, VI=0 DC current gain GI 80 - - Input resistance R1 3.29 4.7 6.11 Resistance ratio R2/R1 8 10 12 fT - 250 - Parameter Input voltage Output voltage Input current Output current Transition frequency Unit V Test Conditions VCC= -5V, IO= -100μA VO= -0.3V, IO= -5mA IO/II= -5mA/ -0.25mA VO= -5V, IO= -10mA KΩ MHz VO= -10V, IO= -5mA, f=100MHz CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 07-May-2012 Rev. B Any changes of specification will not be informed individually. Page 2 of 2