F1774-2200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) FEATURES: Dimensions in mm Product is completely lead (Pb)-free Product is RoHS compliant W L Pb-free DISSIPATION FACTOR TANδ: H e3 < 1 % measured at 1 kHz INSULATION RESISTANCE: FOR C ≤ 0.33 µF: RoHS COMPLIANT P 80.0 + 5.0 30 GΩ average value 15 GΩ minimum value TIME CONSTANT FOR C > 0.33 µF: 5.0 + 2.0 10 000 sec. average value 5000 sec. minimum value TEST VOLTAGE: Electrode Free margin Dielectric (Electrode/electrode): DC 2150 V/2 sec. REFERENCE STANDARDS: Center margin MAXIMUM PULSE RISE TIME: (du/dt) in V/µs RATED VOLTAGE ≤ 15.0 ≤ 22.5 PITCH (mm) ≤ 27.5 ≤ 37.5 AC 275 V 200 150 100 100 EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 DIELECTRIC: Polyester film RATED VOLTAGE: ELECTRODES: AC 275 V, 50/60 Hz Metal evaporated DC 630 V CONSTRUCTION: TERMINALS: Metallized film capacitor Internal series connection 40/100/56 0 10 0.068 µF 0.22 µF 0.47 µF -2 10 0.15 µF Standard: ± 20 % 0.33 µF CAPACITANCE TOLERANCE: -1 10 2.2 µF 1.5 µF 1 µF 0.68 µF E6 series 0.01 µFX2 - 2.2 µFX2 E12 values on request 0.1 µF CAPACITANCE RANGE: 0.022 µF CLIMATIC TESTING CLASS ACC. TO EN 60068-1: 1 10 0.015 µF 0.01 µF Plastic case, epoxy resin sealed, flame retardant UL 94V-0 0.047 µF COATING: Between interconnected terminations and case (foil method): AC 2500 V for 2 sec. at 25 °C Z [Ω] Insulated stranded copper wire, type LiY 0.5 mm2 (or AWG 20) ends stripped 0.033 µF PERMISSIBLE DV VOLTAGE: FURTHER TECHNICAL DATA: See page 21 (Document No 26504) 10 -3 0.01 0.05 0.1 0.5 1.0 5.0 10 f 50 100 [MHz] Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 80 mm. Document Number: 26512 Revision: 12-May-06 To contact us: [email protected] www.vishay.com 25 F1774-2200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 - 2.2 µFX 0.01 - 1.0 µFX E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 0.01 - 2.2 µFX 0.01 - 0.82 µFX LR 64546 LR 64546-8 CB TEST-CERTIFICATE (for AC 275 V) 0.01 - 2.2 µFX2 DE 1-8790 Germany 0.01 - 2.2 µFX2 83658 EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 APPROVAL MARK This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria Belgium Denmark Finland Sweden France Germany Ireland Italy Switzerland Netherlands Japan Singapore Israel Portugal Spain Great Britain Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia CAPACITANCE TOL. % PITCH P (mm) BOX NO. DIMENSIONS WxHxL (+ 0.2/- 0.4 mm) WEIGHT (g) QUANTITY PACKAGE (pcs) ORDERING CODE* 0.01 µFX2 0.015 µFX2 0.022 µFX2 0.033 µFX2 0.047 µFX2 0.068 µFX2 0.1 µFX2 0.15 µFX2 0.15 µFX2 0.22 µFX2 0.22 µFX2 0.33 µFX2 0.33 µFX2 0.47 µFX2 0.47 µFX2 0.68 µFX2 0.68 µFX2 1.0 µFX2 1.0 µFX2 1.5 µFX2 1.5 µFX2 2.2 µFX2 2.2 µFX2 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 15.0 22.5 15.0 22.5 15.0 27.5 22.5 27.5 22.5 27.5 22.5 37.5 27.5 37.5 27.5 05 05 05 05 05 49 49 09 08 11 28 01 36 29 13 14 38 18 38 16 17 19 41 5.3 x 10.3 x 17.8 5.3 x 10.4 x 17.8 5.3 x 10.3 x 17.8 5.3 x 10.3 x 17.8 5.3 x 10.3 x 17.8 6.0 x 12.0 x 17.9 6.0 x 12.0 x 17.9 6.3 x 14.3 x 26.3 8.3 x 14.3 x 17.8 7.3 x 15.3 x 26.3 8.3 x 17.3 x 17.8 8.8 x 16.8 x 26.3 13.3 x 22.3 x 17.8 8.8 x 18.3 x 31.3 10.3 x 18.3 x 26.3 11.0 x 20.3 x 31.23 15.3 x 26.3 x 26.3 14.0 x 24.3 x 31.3 15.3 x 26.3 x 26.3 14.0 x 24.3 x 41.3 16.0 x 29.3 x 31.3 15.5 x 28.3 x 41.3 19.5 x 34.8 x 31.3 2.6 2.6 2.6 2.6 2.6 3.2 3.2 4.5 3.9 5.3 4.7 6.5 8.3 8.0 7.9 14.1 15.5 16.2 15.5 20.1 21.2 25.2 29.2 1000 1000 1000 1000 1000 900 900 650 800 500 600 500 400 450 500 350 250 250 250 200 175 150 125 F1774-310-22 . .-E3 F1774-315-22 . .-E3 F1774-322-22 . .-E3 F1774-333-22 . .-E3 F1774-347-22 . .-E3 F1774-368-22 . .-E3 F1774-410-22 . .-E3 F1774-415-22 . .-E3 F1774-415-226 .-E3 F1774-422-22 . .-E3 F1774-422-226 .-E3 F1774-433-22 . .-E3 F1774-433-226 .-E3 F1774-447-22 . .-E3 F1774-447-226 .-E3 F1774-468-22 . .-E3 F1774-468-226 .-E3 F1774-510-22 . .-E3 F1774-510-226 .-E3 F1774-515-22 . .-E3 F1774-515-226 .-E3 F1774-522-22 . .-E3 F1774-522-226 .-E3 Inbuilt discharging resistor on request (with larger case dimensions). * With and mark, the ordering code is F1774-. . .- 2240-E3 or F1774-. . .- 2264-E3. The suffix “E3” is used for the RoHS-compliant version, although in most cases this is the only available version. www.vishay.com 26 Document Number: 26512 Revision: 12-May-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1