Strain Reliefs AS85049/2 and MS3057C Strain Reliefs M85049/2-12C MIL-DTL-5015 MS ”V” Thread (Mates to General Duty ‘A’ Endbell) Dash No. Basic Part No. SUPERCEDED SPECIFICATION MS3057-16C Dash No. Basic Part No. Clamping Bars F H (See Note 3) E Thread Cable Entry G TABLE I Dash No. 3C 4C 6C 8C 10C 12C 16C 20C 24C 28C 32C E Thread Conn. Shell Class 2B Ref.(s) 1/2 - 28 UNEF 8S, 10S 5/8 - 24 UNEF 10SL, 12S, 12 3/4 - 20 UNEF 14S, 14 7/8 - 20 UNEF 16S, 16 1 - 20 UNEF 18 1 3/16 - 18 UNEF 20, 22 1 7/16 - 18 UNEF 24, 28 1 3/4 - 18 UNS 32 2 - 18 UNS 36 2 1/4 - 16 UN 40 2 1/2 - 16 UN 44 F Max 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.437 (36.5) 1.437 (36.5) 1.562 (39.7) 1.812 (46.0) 2.062 (52.4) 2.062 (52.4) 2.188 (55.6) G Dia Max .812 (20.6) .937 (23.8) 1.062 (27.0) 1.188 (30.2) 1.312 (33.3) 1.562 (39.7) 1.750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.812 (71.4) H Max Closed .217 (5.5) .296 (7.5) .390 (9.9) .434 (11.0) .434 (11.0) .596 (15.1) .596 (15.1) .858 (21.8) .858 (21.8) 1.107 (28.1) 1.421 (36.1) Cable Entry Max .219 (5.6) .312 (7.9) .438 (11.1) .531 (13.5) .625 (15.9) .750 (19.1) .938 (23.8) 1.250 (31.8) 1.375 (34.9) 1.625 (41.3) 1.875 (47.6) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. Finish on M85049/2 is cadmium olive drab over electroless nickel (1,000 hour salt spray). © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 62-10