FEATURES • 30 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 8.5A • STANDARD 2.00 X 1.00 X 0.40 INCH • HIGH EFFICIENCY UP TO 91% • 2:1 WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 89/336 EEC • DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Semiconductor Equipment T E C H N I C A L S P E C I F I C AT I O N Negative logic Remote On/Off DESCRIPTION The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch package. FED30 series have 2:1 wide input voltage of 9-18 and 18-36 and 36-75VDC. The FED30 series have features 1600VDC of isolation, short circuit protection, over-current protection, over-voltage protection, over-temperature protection and six sided shielding. All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS Output power Voltage accuracy Voltage adjustability Minimum load Line regulation 30 Watts max. Full load and nominal Vin ±1% Single output ± 10% 0% LL to HL at Full Load ± 0.2% Single ± 0.5% Load regulation No load to Full load Dual ± 1% Cross regulation (Dual) Asymmetrical load 25% / 100% FL ± 5% 1.5-5.1Vo 100mVp-p 20MHz bandwidth Ripple and noise (Measured with a 1uF/50V MLCC) 12-15Vo 150mVp-p ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 250μS 1.5V Output 2.0V 2.5V Output 3.3V Over voltage protection 3.3V Output 3.9V 5.0V & 5.1V & ±5V Output 6.2V Zener diode clamp 12V & ±12V Output 15V Output 18V 15V & ±15V Over load protection % of FL at nominal input 150%, typ. Short circuit protection Hiccup, automatics recovery INPUT SPECIFICATIONS 9 – 18VDC 18 – 36VDC 36 – 75VDC Input filter Pi type 12V input 25VDC Input surge voltage 24V input 50VDC 100mS max 48V input 100VDC Input reflected ripple current Nominal Vin and full load 20mAp-p Nominal Vin and Power up 30mS, typ. Start up time constant resistive load Remote ON/OFF 30mS, typ. 12V input 9VDC Start-up voltage 24V input 18VDC 48V input 36VDC 12V input 8VDC Shutdown voltage 24V input 16VDC 48V input 32VDC Remote ON/OFF (Note 6) Open or 3V < Vr < 12V (Positive logic)(Standard) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Short or 0V < Vr < 1.2V DC-DC ON (Negative logic)(Option) Open or 3V < Vr < 12V DC-DC OFF Input current of Remote control pin Nominal Vin -0.5mA ~ +0.5mA Remote off state input current Nominal Vin 3mA Input voltage range 12V nominal input 24V nominal input 48V nominal input GENERAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Efficiency Operating ambient temperature See table 1600VDC, min. Input to Output Isolation voltage 1600VDC, min. Input (Output) to Case Case grounding Connect case to -Vin with decoupling Y Cap 9 Isolation resistance 10 ohms, min. Isolation capacitance 1500pF, max. Switching frequency 430KHz, typ. Design meets safety standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94-V0) 2.00 X 1.00 X 0.40 Inch Dimensions (50.8X 25.4 X 10.2 mm) Weight 30.5g(1.07oz) 6 3.173 x 10 hrs. BELLCORE-TR-NWT-000332 MTBF (Note 1) 5 MIL-HDBK-217F 5.548 x 10 hrs. -40ºC to +50ºC (without derating) +50ºC to +85ºC (with derating) Maximum case temperature 105ºC Storage temperature range -55ºC to +125ºC Over temperature protection 115ºC, typ. Thermal impedance Nature convection 12ºC/Watt (Note 7) Nature convection with heat-sink 10ºC/Watt Thermal shock MIL-STD-810F Vibration MIL-STD-810F Relative humidity 5% to 95% RH EMC CHARACTERISTICS EMI (Note 8) EN55022 ESD EN61000-4-2 Radiated immunity Fast transient (Note 9) Surge (Note 9) Conducted immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 VER:00 Class A Air ± 8KV Contact ± 6KV 10 V/m ± 2KV ± 1KV 10 Vr.m.s Page 1 of 3 Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Issued Date：2008/07/11 Model Number Input Range Output Voltage FED30-12S1P5 FED30-12S2P5 FED30-12S3P3 FED30-12S05 FED30-12S5P1 FED30-12S12 FED30-12S15 FED30-12D05 FED30-12D12 FED30-12D15 FED30-24S1P5 FED30-24S2P5 FED30-24S3P3 FED30-24S05 FED30-24S5P1 FED30-24S12 FED30-24S15 FED30-24D05 FED30-24D12 FED30-24D15 FED30-48S1P5 FED30-48S2P5 FED30-48S3P3 FED30-48S05 FED30-48S5P1 FED30-48S12 FED30-48S15 FED30-48D05 FED30-48D12 FED30-48D15 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC 1.5 VDC 2.5 VDC 3.3 VDC 5.0 VDC 5.1 VDC 12 VDC 15 VDC ±5VDC ±12VDC ±15VDC Output Current Min. Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Max. Load 8500mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA 8500mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA 8500mA 8000mA 8000mA 6000mA 6000mA 2500mA 2000mA ±3000mA ±1250mA ±1000mA Output (4) Ripple & Noise 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p Input Current (3) (2) No load 70mA 100mA 90mA 130mA 130mA 90mA 80mA 90mA 50mA 40mA 50mA 50mA 50mA 75mA 75mA 40mA 30mA 70mA 30mA 30mA 45mA 45mA 30mA 45mA 45mA 40mA 40mA 35mA 30mA 20mA Full Load 1416mA 2083mA 2716mA 3012mA 3072mA 2941mA 2941mA 3012mA 3012mA 3012mA 700mA 1028mA 1325mA 1453mA 1482mA 1437mA 1437mA 1453mA 1471mA 1453mA 350mA 514mA 663mA 727mA 750mA 718mA 718mA 727mA 744mA 735mA Eff (4) (%) Capacitor(5) Load max 79 84 85 87 87 89 89 87 87 87 80 85 87 90 90 91 91 90 89 90 80 85 87 90 89 91 91 90 88 89 20000μF 20000μF 20000μF 14400μF 14400μF 3000μF 2000μF ± 3000μF ± 2000μF ± 1300μF 20000μF 20000μF 20000μF 14400μF 14400μF 3000μF 2000μF ± 3000μF ± 2000μF ± 1300μF 20000μF 20000μF 20000μF 14400μF 14400μF 3000μF 2000μF ± 3000μF ± 2000μF ± 1300μF Note FED30-48S05 Derating Curve FED30-48S05 Derating Curve with Heat-Sink 120 OUTPUT POWER (%) 120 100 80 60 40 20 100 80 60 40 20 0 -40 -20 0 20 40 60 65 0 80 100 120 -40 -20 0 AMBIENT TEMPERATURE(℃) 20 40 60 71 80 100 120 AMBIENT TEMPERATURE(℃) FED30-48S05 Efficiency VS Output Load FED30-48S05 Efficiency VS Output Load FED30-48S05 Efficiency VSVSInput FED30-48S05 Efficiency Outputvoltage Load 95 95% 90 93% EFFICIENCY (%) 9. OUTPUT POWER (%) 2. 3. 4. 5. 6. 7. 8. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) MIL-STD-217F Notice2 @Ta=25 ºC, Full load (Ground, Benign, controlled environment) Maximum value at nominal input voltage. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The ON/OFF control pin voltage is referenced to -Input. Heat sink is optional and P/N: 7G-0020A-F. The FED30 series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend: 12Vin : 10μF/25V X7R 1812 MLCC; 24Vin : 4.7μF/50V X7R 1812 MLCC; 48Vin : 2.2μF/100V X7R 1812 MLCC . An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5. The filter capacitor Power Mate suggest: 12Vin & 24Vin : Nippon chemi-con KY series, 330μF/50V, ESR 55mΩ. 48Vin : Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ EFFICIENCY (%) 1. 91% 89% 87% 85 80 75 70 65 60 55 85% 36 40 44 48 52 56 60 INPUT VOLTAGE (V) 64 68 72 76 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) VER:00 Page 2 of 3 Issued Date：2008/07/11 Recommended Filter for EN55022 Class A Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN SINGLE DUAL 1 2 3 4 5 6 + INPUT - INPUT CTRL + OUTPUT - OUTPUT TRIM + INPUT - INPUT CTRL + OUTPUT COMMON - OUTPUT Single Output FED30-12S XX FED30-24S XX FED30-48S XX C1 10μF/25V 1812 MLCC 6.8μF/50V 1812 MLCC 2.2μF/100V 1812 MLCC C2 & C3 1000pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC Dual Output FED30-12D XX FED30-24D XX FED30-48D XX C1 10μF/25V 1812 MLCC 6.8μF/50V 1812 MLCC 2.2μF/100V 1812 MLCC C2 & C4 1000pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 65 64 RU 54 RD 43 Recommended EN55022 Class A Filter Circuit Layout VER:00 Page 3 of 3 Issued Date：2008/07/11