RCD MP220P-R100-F Power film resistors to 140 watt Datasheet

POWER FILM RESISTORS TO 140 WATT
MP SERIES
Term.W is
RoHS
compliant
& 260°C
compatible
RoHS
RC
D
M
1 0 R P247
0 1
%
Industry’s widest range of TO-style power resistors!
Standard resistance range: 0.01Ω to 56KΩ
Standard tolerance: ±1%, ±2%, ±5% (available to 0.025%)
Non-Inductive performance
Resistor is electrically isolated from the mounting surface
OPTIONS
Option P: Increased pulse capability
Option G: Gull-wing lead formation for surface mounting
Option B: Increased power design
Numerous design modifications are available (special
marking, custom lead wires, burn-in, etc).
MP126
MP220, MP220B
→
.335 [8.5]
←.12 [3.1]
.15 [3.8]
→ .40 [10.2] ← → ← .06 [1.5]
.117[3]
.122
[3.1]
.142
[3.6]
.472
[12]
↓
↓
.125 [3.2]
↑
.400
[10]
.024 [.6] → ←
MP126G
.16 [4]
↑
[2.5]
→ ←.020[.5]
→ .200
←
[5.08]
→
→
→ ← .10
[10]
→ ←.020[.5]
← .080 [2]
← .200 [5]
MP126
.20 [5]
← .19
[4.8]
.20
[5.1]
.400
[10.2]
→
→
.63 [16]
→ ← .06 [1.5]
.40 [10.2]
.800
[20.3]
.125
[3.2]
← .177[4.5]
.080
[2]
→ ← .020 [.5]
.55
[14]
→ ←.12 [3]
.032 [.8]→ ←
dia.
→ .430 ←
[10.9]
.200
→ [5.08]
←
TYPICAL PERFORMANCE CHARACTERISTICS
Max. Power with Heat
Max Power1
Sink (25°C)
w/o Heat Sink
(25°C)
<240Ω
≥240Ω
20W
MP
D
1K 2 2 0
1%
MP D
2
1K 2 0 G
1%
MP247
MPD220
.030 → ←
[.76]
MP220G, →
MP220GB →
RC
D
RC
RC
MP D
1 K 126
1%
RCD’s MP series feature power film resistor elements designed
for excellent environmental stability as well as superior highfrequency performance (custom designs up to 1GHz avail.). All
sizes feature metal base plate for optimum heat transfer. The
resistor is electrically isolated from the metal tab, and molded
into various package styles with high-temp flame retardant epoxy.
MP126 and MP220 in reduced wattage ratings now available in
Ω to 49.9K: MP126 (5W) to
tighter TCs and tolerances from 10Ω
0.025% and 2ppm, MP220 (10W) to 0.05% and 5ppm.
→
← .177[4.5]
→ ← .10[2.5]
.400
SPECIFICATIONS
RCD Type
RC
MP D
1K 2 2 0
1%
High Performance Molded Heat-Sink Resistors
.590
[15]
.030 [.76] → ←
.200
→ [5.08] ←
← .060 [1.5]
← .140 [3.5]
RESISTORSCAPACITORSCOILSDELAY LINES
10W
1.25W
Thermal
Resis. 2
Max.
Voltage3,4
Resistance
Range (Ω)4
<6°C/W
300V
.01 - 56K
MP126G
20W
10W
1.25W
<6°C/W
300V
.01 - 56K
MP220
35W
20W
2.25W
<4°C/W
500V
.01 - 56K
MP220G
25W
20W
2.00W
<4°C/W
500V
.01 - 56K
50ppm ≥10Ω (2ppm avail)
100ppm 0.1 - 9.9Ω
250ppm 0.01 - 0.99Ω
Standard Temperature Coefficient
(Typ, +25°C to +125°C)
Operating Temperature Range
-55 to +155°C
Std. Resistance Tol. (0.025%-5% avail)
±1% ≥.05Ω, ±5% <.05Ω
Dielectric Strength
1500VAC
Current Rating
30A max.
Insulation Resistance
10,000 MΩ min.
MPD220
30W
20W
2.25W
<4°C/W
500V
.01 - 56K
Load Life Stability
±1%
MP220B
50W
30W
2.25W
<2.5°C/W
500V
.1 - 56K
Overload
1.5x W, 5S, nte 1.5x Max V
MP220GB
45W
30W
2.25W
<2.5°C/W
500V
.1 - 56K
Thermal Shock (Mil-Std-202 M107C)
±0.25%
MP247
100W
n/a
3.5W
<1.5°C/W
√(PR)
.1 - 240
Soldering Stability
±0.1%
MP247B
140W
n/a
3.5W
<1°C/W
√(PR)
.1 - 240
Moisture Res (Mil-STD-202, M106)
±0.5%
1 Power rating without heat sink is based on unit being mounted on double-sided 2oz 1” x 1” x .063” PCB.
2R
θJC Film (J) to Case (C)
3 Voltage determined by E= (PR)1/2, not to exceed the Max.Voltage Rating
4 Extended range available, consult factory.
P/N DESIGNATION:
POWER RATING
Power rating is based on the resistor being tightly screwed to a suitable
heat sink (with thermal compound) to limit hot spot case temperature to
155°C. Derate W, V, A by .77%/°C above 25°C (as depicted in chart
below). Mounting torque not to exceed 8 in-lbs. Refer to Applic.Guide R-34
for additional detail concerning heat-sink resistor mounting guidelines.
% OF RATED W/V/A
100
75
50
25
0
25
50
75
100
125
CASE TEMPERATURE ( °C )
150
175
MP220
- 1001 - F B
W
RCD Type
Options: P, G, B, etc (leave blank for std)
Resis.Code 0.025%-1%: 3 digits &multiplier (R010=.01Ω,
R100=.1Ω,1R00=1Ω,10R0=10Ω,1000=100Ω,1001=1K, etc)
Resis.Code 2%-10%: 2 digits & multiplier (R01=.01Ω,
R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, etc.)
Tolerance Code: J=5%, G=2%, F=1%, D=0.5%,
C=0.25%, B=0.1%, A=0.05%, X=0.025%
Packaging: B = Bulk, T = Taped (bulk is standard)
Optional Temp. Coefficient: 25=25ppm, 50=50ppm,
25=25ppm, 10=10ppm, 5=5ppm, 2=2ppm (leave blank for std)
Termination: W= Pb-free, Q= Sn/Pb. Leave blank if either is
acceptable (RCD will select based on lowest price and quickest delivery)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA069B
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
78
Similar pages