Carbon Film Resistors Discontinued Carbon Film Resistors Type: ERDS1 (0.5 W) ERDS2 (0.25 W) ERD25 (0.25 W) ■ Features ● ● ● ● ● Reliability .................... Automatic insertion .... Marking ...................... Flame Retardant ........ Reference Standard ... High reliability by using carbon film Taping style for automatic inserting machines 4 color code marking Using UL 94 V-0 approved coating for flame retardant type IEC 60115-2, JIS C 5201-2 ■ Explanation of Part Numbers Product Code Carbon Film Resistors 1 2 3 4 5 6 7 8 9 10 11 E R D S 1 T J 1 0 3 T Power Rating at 70 °C Amb. 0.5 W S1 0.25 W S2 0.25 W 25 Special Feature and/or Cut & Formed Style (Type) T V, FV F Standard (Straight leads) Radial formed (S1, 25) Flame-retardant Resistance Value Resistance Tolerance J 0 The first two digits are significant figures of resistance and the third one denotes number of zeros following. Decimal point expressed by R as 4.7 액= 4R7. (*Nil for Jumper) ±5 % Jumper Suffix for Packaging and /or Cut & Formed Leads Nil T V P ■ Construction Standard bulk packing Standard taped box (26 mm axial or Radial) Standard taped & box (52 mm axial) Lead formed Flame retardant ■ Dimensions in mm (not to scale) H L fD H Primary coating Lead wire 1st significant figure. Spiralling fd 2nd significant figure. Multiplier Carbon film (Metal film for 4.3 액 or less) Insulative coating Tolerance See Page ER131 for color code indication Standard Quantity : 2000 pcs. Standard: Epoxy resin H Mass (Weight) [mg/pc.] 20 min. 228 20 min. 107 20 min. 228 Dimensions (mm) Flame retardant Silicone resin (UL94V-0 approved) High thermal conductive ceramic core End cap Marking Type L fD fd ERDS1T ERDS1F 6.35 –0.35 2.30 –0.30 0.60 ERDS2T ERDS2F 3.20 ERD25T ERD25F 6.35 –0.35 2.30 –0.30 0.60 +0.65 ±0.20 +0.65 +0.50 +0.20 1.70 –0.10 +0.50 0.45 ±0.05 ±0.05 ±0.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Discontinued Carbon Film Resistors ■ Ratings Type Power Rating at 70 °C (W) Limiting Element Voltage (Maximum (1) RCWV) (V) Maximum Dielectric Maximum Standard Resistance Intermittent Overload Withstanding (2) Resistance Tolerance Overload (3) Voltage Voltage (%) Value Voltage (VAC) (V) (V) 0.5 300 600 E24 1 1 M 300 250 500 2.2 M 750 E24 ±5(J) 1 200 Jumper ERDS2T0 Rated Current : 2 A, 1 M Resistance : < 50 m액 500 ERD25T ERD25F (Flame Retardant) ±5(J) 350 0.25 0.25 300 600 3.3 M 750 E24 ±5(J) 1 350 Jumper ERD25T0 max. 3.3 M 750 ERDS2T ERDS2F (Flame Retardant) min. 500 ERDS1T ERDS1F (Flame Retardant) Resistance Range (액) Rated Current : 2 A, 1 M Resistance : < 50 m액 (1) Rated Voltage=앀Power Rating҂Resistance Value or Limiting Element Voltage (max. RCWV), whichever is less. (RCWV: Rated Continuous working Voltage). (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5҂Power Rating or max. Overload Voltage listed above whichever less. (3) Intermittent Overload Test Voltage (IOTV) shall be determined from IOTV=4҂Power Rating (IOTV=3҂Power Rating for ERDS2 type) or max. Intermittent Overload Voltage listed above whichever less. 120 Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. 100 –55 °C 70 °C 80 60 40 20 155 °C 0 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) ■ Performance Specifications Characteristics Specifications Resistance Value range T.C.R. ERDS2 ERDS1, 25 4.3 액 or less 4.3 액 or less Test Methods Temperature coefficient –6 ҂10 /°C (ppm/°C) ±350 4.7 액 to 62 k액 4.7 액 to 51 k액 –150 to –350 68 k액 to 200 k액 56 k액 to 430 k액 –150 to –500 220 k액 to 510 k액 470 k액 to 910 k액 –150 to –700 560 k액 or over 1 M액 or over –150 to –1000 Resistance value at room temperature and room temperature +100 °C Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Discontinued Carbon Film Resistors ■ Shape and Packaging ● Bulk type (Lead forming) Standard forming Type D Part Numbers Std. Qty. (PCS) ERDS2TJ첸첸첸A d Carbon Film R H L P ERD25TJ첸첸첸B fD L 3.2±0.2 2000 1.7 +0.65 +0.5 6.35 –0.35 ERDS1TJ첸첸첸B P +0.2 –0.1 2.3 –0.3 H d +1.5 –0.5 5.0±0.5 4.5 10.0±0.5 4.5–0.5 0.45 +1.5 0.6 Radial forming H h L d Lead Insulation Coating k k Type Part Numbers Std. Qty. (PCS) Carbon Film R ERD25VJ첸첸첸 ERD25FVJ첸첸첸 ERDS1VJ첸첸첸 ERDS1FVJ첸첸첸 2000 Type Part Numbers Std. Qty. (PCS) L Carbon Film R ERD25FJ첸첸첸P ERDS1FJ첸첸첸P 2000 6.35 –0.35 fD L +0.65 H h +0.5 k 6.35 –0.35 2.3 –0.3 20 min. 9.5 min. 2.0 j ±0.5 d +2.0 6.0 –1.0 0.6 j Self standing form D h d L 6.5±1.0 P 3.5±1.0 fD +0.65 +0.5 2.3 –0.3 P h d 10.0±1.5 11.5±1.0 0.65 0.8 ● Axial taping type Shape 6±1 L 0.5 max. 0 L1 0.8 max. L2 1 max. P fD P 0.5 max. fd 3.2 min. 1 2 3 4 L max. 3.4 3.4 6.5 6.5 fD max. 1.9 1.9 2.5 2.5 fd 0.45 0.45 0.6 0.6 P ±0.3 5.0 5.0 5.0 5.0 W W0 26+1 –0 52±1 +1 26 – 0 52±1 41.5 max. 64.5±0.5 41.5 max. 64.5±0.5 쪧 |L1– L 2| <1.0 쪨 Cumulative 250±2 mm by 50 pitch W W0 Packaging Shape Flat box b Ma rkin 26 mm Axial taping 52 mm Axial taping Type Part Numbers 1 Carbon Film R ERDS2FJ첸첸첸T 2 Carbon Film R ERDS2FJ첸첸첸V ERDS2TJ첸첸첸T ERDS2TJ첸첸첸V Std. Qty. (pcs./box) Size of box a҂b҂c (mm) 5000 52҂85҂255 5000 78҂85҂255 4000 52҂95҂255 2000 78҂58҂255 ERD25TJ첸첸첸T g c 26 mm Axial taping 3 Carbon Film R a ERD25FJ첸첸첸T ERDS1TJ첸첸첸T ERDS1FJ첸첸첸T ERD25TJ첸첸첸V 52 mm Axial taping 4 Carbon Film R ERD25FJ첸첸첸V ERDS1TJ첸첸첸V ERDS1FJ첸첸첸V Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Discontinued Carbon Film Resistors ● Radial Taping type Radial Taping P2 g h h Type Part Numbers Std. Qty. (pcs.) Carbon Film R ERDS1VJ첸첸첸T ERD25VJ첸첸첸T ERDS1FVJ첸첸첸T ERD25FVJ첸첸첸T 2000 H1 A P F0 fD P1 fd W W0 W1 L H0 F W2 Lead Insulation Coating t l fD0 P0 Dimensions (mm) P P0 P1 P2 F F0 W Dimensions (mm) 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.00 5.0±0.5 2.5±0.5 18.0±0.5 W0 W1 W2 H1 H0 fD0 L Dimensions (mm) 5 min. 9.0±0.5 3 max. 32 max. 16.0±0.5 4.0±0.2 11 max. k t 0 max. 0.7±0.2 0±2.5 ° 0±2 6.35+0.65 –0.35 2.3+0.5 –0.3 0.60±0.05 욼g 욼h A fD fd Radial Taping for small type P2 P h A fD Type Part Numbers Carbon Film R ERDS2TYJ첸첸첸T H0 F Std. Qty. (pcs.) 2000 l P0 t W W0 W1 P1 W2 fd fD0 Dimensions (mm) 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.00 5.0±0.5 18.0±0.5 W0 W1 W2 H0 fD0 5 min. 9.0±0.5 3 max. +1.0 19.0–0.5 4.0±0.2 0 max. k Dimensions (mm) 욼h t A fD fd 0±2 0.7±0.2 3.2±0.2 1.7+0.2 –0.1 0.45±0.05 130 P P0 P1 P2 F W Dimensions (mm) Indication 45 320 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Discontinued Carbon Film Resistors Safety Precautions The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors shown on page ER3 of this catalog. 1. Keep the rated power and ambient temperature within the specified derating curve. * When positioning and mounting Carbon Film Resistors (hereafter called the resistors), make allowance for the effect of heat generated through close contact between the resistors and neigh bor ing com po nents and for the temperature rise of adjacent heat-generating components. 2. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. When applying pulses to the resistors, keep the pulse peak within the rated voltage. 3. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during handling of the boards with the resistors mounted. 4. Ultrasonic cleaning may cut the lead wire due to resonance. Try and check it before use. 5. Flame-retardant type 1)Take special care in handling the flame-retardant type because it is covered with a special coating and is therefore by more susceptible to external shock and solvent damage than other regular types of the resistors. 2)The external coating used for the flame-retardant type is not resistant to solvent. Take great care in using solvent. If problems are anticipated, then take appropriate preventive measures, such as mounting the resistors after solvent is used. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006 Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault (1) Precautions for use • These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric ap plianc es, offi ce equipment, information and com mu ni cation equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products . • Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the performance or reliability of the products. • Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 ° C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Feb. 2006 – ER3 – Fixed Resistors Appendix ■ How to express the resistance tolerance with a Matsushita part number The resistance tolerance is identified by a single letter in accordance with the following table and the code is placed just before the resistance code in the following examples. Tolerance Code Tolerance (%) W B C D F G J K M ±0.05 ±0.1 ±0.25 ±0.5 ±1 ±2 ±5 ±10 ±20 Examples W1001 : B1001 : C1001 : D1001 : F1001 : G1001 : J101 : K101 : M101 : 1000 액±0.05 % 1000 액±0.1 % 1000 액±0.25 % 1000 액±0.5 % 1000 액±1 % 1000 액±2 % 100 액±5 % 100 액±10 % 100 액±20 % ■ Color code indication for the resistance value and the tolerance Fixed resistors whose resistance value and tolerance are indicated by color code follow the standard below. Color code Color Black Brown Red Orange Yellow Green Blue Violet Gray White Gold Silver None First digit Second digit Third digit Multiplier 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 1 10 2 10 3 10 4 10 5 10 6 10 7 10 –1 10 –2 10 Indication example Color code of 5 color bands When the standard resistance value follows E48 series or 96 series, color code of the resistors are indicated by five color bands. Example below is 154 k액. Example 1 Resistance tolerance % Code ±1 ±2 ±0.05 F G W ±0.5 ±0.25 ±0.1 D C B ±5 ±10 ±20 J K M Color code of 4 color bands When the standard resistance value follows E6 series, 12 series or 24 series, color code of the resistors are indicated by four color bands. Example below is 15 k액. Example 2 1st Color 2nd Color 3rd Color 4th Color 5th Color 1st Color 2nd Color 3rd Color 4th Color Brown (1) Green (5) Yellow (4) Orange (1000) Brown (±1 %) Brown (1) Green (5) Orange (1000) Gold (±5 %) Feb. 2006 – ER131 –