Crystal Clock Oscillator Specification IQXO-826 ISSUE 1; March 2016 Description Simple package crystal oscillator in a hermetically sealed 8-pin DIL package with tri-state function Frequency Parameters 1.0MHz to 100.0MHz ±25.00ppm to ±100.00ppm ±5ppm max in 1st yr @ 25°C Frequency Frequency Stability Ageing Electrical Parameters 5.0V ±10% Supply Voltage Operating Temperature Ranges -10 to 70°C -40 to 85°C Outline (mm) Output Details Output Compatability HCMOS Drive Capability 1.0MHz to 40.0MHz 50pF 40.0MHz to 80.0MHz 30pF 80.0MHz to 100.0MHz 15pF Output Control Tri-state Operation: Logic '1' to pin 1 enables oscillator output Logic '0' to pin 1 disables oscillator output, the oscillator output goes to a high impedance state No connection to pin 1 enables oscillator output Start Up Time: 10ms max Output Levels VoH: 90% Vs min VoL: 10% Vs max Noise Parameters Phase Jitter (12kHz-20MHz): 1ps rms max Environmental Parameters Shock: 1500G, 0.5ms, 5 times in each of 6 directions, along 3 mutually perpendicular planes Vibration: 20G (20Hz-2000Hz), 1.5mm amplitude, cross-over frequency 80Hz, in 3 mutually perpendicular planes Storage Temperature Range: -55 to 125°C Ordering Information Frequency* Model* Frequency Stability (over operating temperature range)* Operating Temperature Range* Supply Voltage (*minimum required) Example 20.0MHz IQXO-826 HCMOS ±50ppm -40 to 85C 5V Sales Office Contact Details: UK: +44 (0)1460 270200 France: 0800 901 383 Germany: 0800 1808 443 USA: +1.760.318.2824 Printed on 27 Apr 16 10:48 using Model Data Sheet V1.2550 Email: [email protected] Web: www.iqdfrequencyproducts.com Page 1 of 2 Crystal Clock Oscillator Specification IQXO-826 Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Compliant Compliant Not Applicable Packaging Details Pack Style: Bulk Pack Size: 40 Loose in Bulk Pack Electrical Specification - maximum limiting values 5.0V ±10% Frequency Min 1.0MHz 20.0MHz Frequency Max 19.999999MHz 49.999999MHz 50.0MHz 79.999999MHz 80.0MHz 100.0MHz Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle °C ppm mA ns % -10 to 70 ±25.0 20 6 45/55% -40 to 85 ±25.0 20 6 45/55% -10 to 70 ±25.0 40 5 45/55% -40 to 85 ±25.0 40 5 45/55% -10 to 70 ±25.0 50 4 45/55% -40 to 85 ±25.0 50 4 45/55% -10 to 70 ±25.0 70 4 45/55% -40 to 85 ±25.0 70 4 45/55% This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website. Sales Office Contact Details: UK: +44 (0)1460 270200 France: 0800 901 383 Germany: 0800 1808 443 USA: +1.760.318.2824 Printed on 27 Apr 16 10:48 using Model Data Sheet V1.2550 Email: [email protected] Web: www.iqdfrequencyproducts.com Page 2 of 2