Surface Mount Aluminum Electrolytic Capacitors NACS Series RoHS Compliant FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION • LOW PROFILE, 5.5mm MAXIMUM HEIGHT • SPACE AND COST SAVINGS • DESIGNED FOR REFLOW SOLDERING includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS Rated Voltage Rating Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes at 20°C 6.3 ~ 50Vdc** 4.7 ~ 220µF -40° ~ +85°C ±20%(M), ±10%(K)* 0.01CV or 3µA, whichever is greater W.V. (Vdc) S.V. (Vdc) Tanδ @ 120Hz/20°C W.V. (Vdc) Z-40°C/Z +20°C Z-55°C/Z +20°C Capacitance Change Tanδ Leakage Current Surge Voltage & Max. Tanδ Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test at Rated W.V. 85°C 2,000 Hours 6.3 10 16 25 35 50 8.0 13 20 32 44 63 0.28 0.24 0.20 0.16 0.14 0.12 6.3 10 16 25 35 50 4 3 2 2 2 2 10 8 6 4 4 4 Within ±25% of initial measured value Less than 200% of specified value Less than specified value *Optional ± 10% (K) Tolerance available on most values. Contact factory for availability. ** For higher voltages, 200V and 400V, see NACV series. MAXIMUM PERMISSIBLE RIPPLECURRENT (mA rms AT 120Hz AND 85OC) Cap. (µF) 4.7 10 22 33 47 56 100 150 220 6.3 31 36 46 47 71 74 Working Voltage (Vdc) 10 16 25 35 20 20 28 28 35 36 32 40 42 65 43 44 65 46 48 68 50 76 - MAXIMUM ESR (Ω AT 120Hz AND 20OC) Cap. (µF) 50 18 27 40 - 4.7 10 22 33 47 56 100 150 220 6.3 14.1 9.88 8.29 4.64 3.10 2.11 Working Voltage (Vdc) 10 16 25 35 - 26.5 23.2 18.1 15.1 12.1 10.6 12.6 10.1 8.04 7.04 8.47 7.06 5.65 7.11 5.92 4.74 3.98 2.66 - 50 42.3 19.9 9.05 - Dφ L 0.3mm max. + I I - W A RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Hz 50 < f<100 100 < f<1K 1K < f<10K f > 10K Correcton 0.8 1.0 1.3 1.5 Factor PART NUMBER SYSTEM NACS 100 M 35V 4x5.5 TR 13 F STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap. (µF) Code 4.7 10 22 33 47 56 100 150 220 4R7 100 220 330 470 560 101 151 221 Working Voltage (Vdc) 6.3 10 16 25 35 50 4x5.5 4x5.5 4x5.5 5x5.5 4x5.5 4x5.5 5x5.5 5x5.5 6.3x5.5 4x5.5 4x5.5 5x5.5 5x5.5 6.3x5.5 4x5.5 5x5.5 5x5.5 6.3x5.5 5x5.5 5x5.5 5x5.5 6.3x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 6.3x5.5 - Series P B RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF DIMENSIONS (mm) Case Size Dφ±0.5 L max. A/B±0.2 I ± 0.2 W 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 P±0.2 1.0 1.4 2.2 PRECAUTIONS ® 4 NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com