IPT SE Series Bayonet Lock Connectors IPT 06 GSE Straight Plug Connector with Shrinkboot Backshell IPT G 06 GSE 18-11 S Z XX MIL-C-26482 Series l Type Mod Code Options See Table II Grounding Finger (Omit for Standard) Alternate Insert Rotation (W, X, Y, Z) Omit for Normal 06 - Straight Plug Contact Gender P - Pin S - Socket Backshell/Connector Class GSE - Crimp Contact/Environmental with Heatshrink Boot Backshell Shell Size and Insert Arrangements L2 D3 D2 3.5 + 0.2 L1 D1 APPLICATION NOTES 1. Straight plug with backshell suitable for heat shrink boot; Environmental, connector includes wire sealing grommet. 2. Connector Class “GSE” (crimp contact/environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-22 www.glenair.com IPT SE Series Bayonet Lock Connectors IPT 06 GSE Straight Plug Connector with Shrinkboot Backshell TABLE I: DIMENSIONS Shell size D2 +0 - 0.5 D1 Max. D3 +0 - 0.5 L1 Max. Maximum Weight in Grams L2 ± 0.5 8 19.8 15.6 13.3 39 12.2 14 10 23.5 18.4 16.1 39 12.2 16 12 26.5 23.7 21.4 39 12.2 23 14 30.0 24.5 22.2 39 12.2 30 16 33.1 29.8 26.2 39 14.5 43 18 35.3 32.0 28.5 39 14.5 46 20 38.8 36.1 32.5 44 15.8 63 22 42.0 38.5 34.8 44 15.8 78 24 45.1 41.6 37.9 44 14.9 84 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance © 2008 Glenair, Inc. -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good NO Very Good Very Good Good Very Good Very Good Good Very Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-23 www.glenair.com