UNISONIC TECHNOLOGIES CO., LTD MPSA05/55 AMPLIFIER TRANSISTOR NPN MPSA05 PNP MPSA55 FEATURES * Collector-Emitter Voltage: VCEO=60V 1 TO-92 ORDERING INFORMATION Ordering Number Normal Lead Free Halogen Free MPSA05-T92-B MPSA05L-T92-B MPSA05G-T92-B MPSA05-T92-K MPSA05L-T92-K MPSA05G-T92-K MPSA55-T92-B MPSA55L-T92-B MPSA55G-T92-B MPSA55-T92-K MPSA55L-T92-K MPSA55G-T92-K Note: Pin assignment: E: EMITTER, C: COLLECTOR, B: BASE www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., LTD Package TO-92 TO-92 TO-92 TO-92 Pin Assignment 1 2 3 E B C E B C E B C E B C Packing Tape Box Bulk Tape Box Bulk 1 of 3 QW-R201-034.Ba MPSA05/55 AMPLIFIER TRANSISTOR ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-base voltage VCBO 60 V Collector-emitter voltage VCEO 60 V Emitter-base voltage VEBO 4 V Collector current - Continuous IC 500 mA 625 mW Total device dissipation, @TA=25℃ PD 5 mW/℃ Derate above 25℃ 1500 mW Total device dissipation, @TC=25℃ PD 12 mW/℃ Derate above 25℃ Junction Temperature TJ 125 ℃ Storage Temperature TSTG -40 ~ +150 ℃ Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL RATINGS Thermal resistance, junction to ambient (Note) RθJA 200 Thermal resistance, junction to case RθJC 83.3 Note: RθJA is measured with the device soldered into a typical printed circuit board. UNIT ℃/W ℃/W ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Collector-emitter breakdown voltage (note 1) Emitter-base breakdown voltage Collector cutoff current Collector cutoff current ON CHARACTERISTICS DC current gain SYMBOL TEST CONDITIONS V(BR)CEO IC=1.0mA, IB=0 60 V(BR)EBO ICES ICBO IE=100μA, Ic=0 VCE=60V, IB=0 VCB=60V, IE=0 4 hFE IC=10mA, VCE=1V IC=100mA, VCE=1V IC=100mA, IB=10mA IC=100mA, VCE=1V Collector-emitter saturation voltage VCE(SAT) Base-emitter on voltage VBE(ON) SMALL-SIGNAL CHARACTERISTICS MPSA05 IC=10mA, VCE=2V, f=100MHz Current gain bandwidth fT product (note 2) MPSA55 IC=100mA, VCE=1V, f=100MHz Note 1. Pulse test: PW<=300μs, Duty Cycle<=2% 2. fT is defined as the frequency at which IhfeI extrapolates to unity. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT V 0.1 0.1 V μA μA 0.25 1.2 V V 100 100 100 50 MHz MHz 2 of 3 QW-R201-034.Ba MPSA05/55 AMPLIFIER TRANSISTOR SWITCHING TIME TEST CIRCUIT TURN-ON TIME VCC -1.0V 5.0µs TURN-OFF TIME 100 VCC +VBB +40V +40V 100 RL OUTPUT +10V VIN 0 tr=3.0ns 5.0µF OUTPUT VIN RB S RL 6.0pF 5.0µF 100 RB S 6.0pF 100 5.0µs tr=3.0ns Figure 1. (Note: Total shunt capacitance of test jig and connectors for PNP test circuits, reverse all voltage polarities.) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R201-034.Ba