AVAGO HSMQ-C150 High performance chip led Datasheet

HSMx-C1xx
High Performance Chip LED
Data Sheet
HSMQ-C110, HSMQ-C120, HSMQ-C150,
HSMQ-C170, HSMQ-C177, HSMQ-C190,
HSMQ-C191, HSMQ-C197, HSMQ-C265,
HSMR-C110, HSMR-C120, HSMR-C130,
HSMR-C150, HSMR-C170, HSMR-C177,
HSMR-C190, HSMR-C191, HSMR-C197,
HSMR-C265
Description
Features
These small chip-type LEDs utilize high efficient and
high brightness InGaN material to deliver competitively
priced high performance blue and green. These 520
nm green and 470 nm blue are unique hues which
provide color differentiation to a product.
• High brightness
• Small size
• Industrial standard footprint
• Diffused optics
• Top emitting or right angle emitting
• Compatible with IR soldering
• Compatible for use with light piping
• Available in 8 mm tape on 7" diameter reel
• Reel sealed in zip locked moisture barrier bags
These ChipLEDs come in either top emitting packages
(HSMx-C130, C150, C170, C177, C190, C191, C197),
in side emitting packages (HSMx-C110, C120) or in a
reverse mount package (C265). The side emitting
package is especially suitable for LCD backlighting
application. The top emitting packages, with their
wide viewing angle, are suitable for direct backlighting
application or being used with light pipes. In order to
facilitate pick and place operation, these ChipLEDs
are shipped in tape and reel with 4000 units per reel for
HSMx-C120, C130, C170, C177, C190, C191 and
C197 packages, and 3000 units per reel for HSMxC110, C150 and C265 packages. All packages are
compatible with IR soldering and binned by both color
and intensity.
Applications
• LCD backlighting
• Push button backlighting
• Front panel indicator
• Symbol indicator
• Microdisplays
• Small message panel signage
CAUTION: HSMQ-Cxxx and HSMR-Cxxx LEDs are Class 1A ESD sensitive per JESD22-A114C.01. Please
observe appropriate precautions during handling and processing. Refer to Avago Technologies Application
Note AN-1142 for additional details.
Package Dimensions
CATHODE
LINE
LED DIE
CATHODE
MARK
1.0 (0.039)
1.25 (0.049)
2.6 (0.102 )
2.0 (0.079 )
3.2 (0.126 )
POLARITY
CLEAR
EPOXY
1.4
(0.055)
DIFFUSED
EPOXY
1.5 (0.059)
POLARITY
0.3 (0.012)
PC BOARD
PC BOARD
0.8 (0.031)
1.6 (0.063 )
0.5 (0.020)
3.2 (0.126 )
0.8 (0.031)
0.3 (0.012)
CATHODE LINE
0.4 ± 0.15
(0.016 ± 0.006)
0.4 ± 0.15
(0.016 ± 0.006)
CATHODE LINE
1.0 (0.039)
SOLDERING
TERMINAL
SOLDERING
TERMINAL
HSMx-C170
HSMx-C110
CATHODE
MARK
CATHODE
MARK
0.8 (0.031)
0.8 (0.031)
1.6
(0.063 )
1.6
(0.063 )
1.0
(0.039)
1.0
(0.039)
POLARITY
0.3 (0.012)
0.3 (0.012)
DIFFUSED EPOXY
DIFFUSED EPOXY
PC BOARD
POLARITY
PC BOARD
0.8 (0.031)
0.3 (0.012)
CATHODE LINE
0.3 ± 0.15
(0.012 ± 0.006)
0.6 (0.023)
0.3 (0.012)
CATHODE LINE
0.3 ± 0.15
(0.012 ± 0.006)
0.3 ± 0.15
(0.012 ± 0.006)
0.3 ± 0.15
(0.012 ± 0.006)
0.7 (0.028) MIN.
SOLDERING
TERMINAL
SOLDERING
TERMINAL
HSMx-C190
HSMx-C191
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
2
0.7 (0.028) MIN.
Package Dimensions, continued
CATHODE
MARK
CATHODE MARK
1.25
(0.049)
1.6 (0.063)
2.00 (0.079)
3.2 (0.126 )
POLARITY
DIFFUSED
EPOXY
POLARITY
2.0 (0.079)
DIFFUSED EPOXY
0.40 (0.016)
0.6 (0.024)
1.1 (0.043)
PC BOARD
PC BOARD
CATHODE LINE
0.16 (0.006)
0.5 (0.020)
0.50 ± 0.20
(0.020 ± 0.008)
0.50 ± 0.20
(0.020 ± 0.008)
CATHODE LINE
0.40 ± 0.15
(0.016 ± 0.006)
0.40 ± 0.15
(0.016 ± 0.006)
1.10 (0.043) MIN.
SOLDERING
TERMINAL
SOLDERING
TERMINAL
HSMx-C150
HSMx-C177
CATHODE MARK
LED DIE
CATHODE MARK
0.3 (0.012)
1.6 (0.063)
0.80
(0.031)
1.60
(0.063)
POLARITY
POLARITY
1.2 (0.047)
CLEAR EPOXY
DIFFUSED EPOXY
0.6 (0.024)
0.40 (0.016)
1.0 (0.039)
PC BOARD
PC BOARD
0.16 (0.006)
0.5 (0.020)
CATHODE LINE
3 – 0.3 (0.012)
0.30 ± 0.15
(0.012 ± 0.006)
CATHODE LINE
0.70 (0.028) MIN.
SOLDERING
TERMINAL
SOLDERING
TERMINAL
HSMx-C197
HSMx-C120
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
3
Package Dimensions, continued
3.4 (0.134)
CATHODE
MARK (ETCHED)
CATHODE
MARK
LED DIE
LED DIE
0.8 (0.031)
1.25 (0.049)
(0.625)
1.6
(0.063)
GREEN SOLDER MASK
POLARITY
UNDIFFUSED
EPOXY
POLARITY
1.15
(0.045)
1.2
(0.047)
0.23 (0.009)
DIFFUSED EPOXY
1.1 (0.043)
1.1 (0.043)
PC BOARD
0.3 (0.012)
0.35 (0.014)
;;
PCB BOARD
0.12 (0.005)
CATHODE LINE
CATHODE LINE
0.50 ± 0.15
(0.020 ± 0.006)
0.50 ± 0.15
(0.020 ± 0.006)
0.3 ± 0.15
(0.012 ± 0.006)
0.3 ± 0.15
(0.012 ± 0.006)
0.7 (0.028) MIN.
SOLDERING
TERMINAL
SOLDERING
TERMINAL
HSMx-C265
HSMx-C130
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
Device Selection Guide
Package Dimension (mm) [1], [2]
InGaN Green
InGaN Blue
Package Description
3.2(L) x 1.5(W) x 1.0(H)
1.6(L) x 1.0(W) x 0.6(H)
1.6(L) x 0.8(W) x 0.35(H)
3.2(L) x 1.6(W) x 1.1(H)
2.0(L) x 1.25(W) x 0.8(H)
2.0(L) x 1.25(W) x 0.4(H)
1.6(L) x 0.8(W) x 0.8(H)
1.6(L) x 0.8(W) x 0.6(H)
1.6(L) x 0.8(W) x 0.4(H)
3.4(L) x 1.25(W) x 1.1(H)
HSMQ-C110
HSMQ-C120
–
HSMQ-C150
HSMQ-C170
HSMQ-C177
HSMQ-C190
HSMQ-C191
HSMQ-C197
HSMQ-C265
HSMR-C110
HSMR-C120
HSMR-C130
HSMR-C150
HSMR-C170
HSMR-C177
HSMR-C190
HSMR-C191
HSMR-C197
HSMR-C265
Untinted, Non-diffused
Untinted, Non-diffused
Untinted, Diffused
Untinted, Diffused
Untinted, Diffused
Untinted, Diffused
Untinted, Diffused
Untinted, Diffused
Untinted, Diffused
Untinted, Non-diffused
Notes: 1. Dimensions in mm.
2. Tolerance ± 0.1 mm unless otherwise noted.
Absolute Maximum Ratings at TA = 25˚C
Parameter
DC Forward Current [1]
Power Dissipation
Reverse Voltage (I R = 100 µA)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Soldering Temperature
Note: 1. Derate linearly as shown in Figure 4.
4
HSMQ-Cxxx
HSMR-Cxxx
20
78
5
95
–30 to +85
–40 to +85
See reflow soldering profile (Figures 11 & 12)
Units
mA
mW
V
˚C
˚C
˚C
Electrical Characteristics at TA = 25˚C
Part Number
Forward Voltage
VF (Volts)
@ IF = 20 mA
Typ.
Max.
Reverse Breakdown
VR (Volts)
@ IR = 100 µA
Min.
Capacitance C
(pF), VF = 0,
f = 1 MHz
Typ.
Thermal
Resistance
RθJ–PIN (˚C/W)
Typ.
HSMQ-C110/C150
HSMR-C110/C150
HSMQ-C120
HSMR-C120/C130
HSMQ-C170/C190/C191
HSMR-C170/C190/C191
HSMQ-C177/C197
HSMR-C177/C197
HSMQ-C265
HSMR-C265
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
5
5
5
5
5
5
5
5
5
5
140
140
100
100
110
110
110
110
65
65
450
450
450
450
300
300
350
350
300
300
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.9
VF Tolerance: ±0.1 V
Optical Characteristics at TA = 25˚C
Part Number
Color
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
HSMQ-C110
HSMQ-C120
HSMQ-C150/170/190/191
HSMQ-C177/197
HSMQ-C265
HSMR-C110
HSMR-C120
HSMR-C130
HSMR-C150/170/190/191
HSMR-C177/197
HSMR-C265
Green
Green
Green
Green
Green
Blue
Blue
Blue
Blue
Blue
Blue
45
45
45
45
45
18
18
18
18
18
18
150
145
145
145
140
60
55
55
55
55
45
Peak
Wavelength
λpeak (nm)
Typ.
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
Viewing
Angle
2 θ1/2
Degrees[3]
Typ.
Luminous
Efficacy
ηV
(lm/w)
Typ.
520
520
520
520
520
469
469
469
469
469
469
527
527
527
527
527
473
473
473
473
473
473
130
155
140
130
150
130
155
145
140
130
150
500
500
500
500
500
88
88
88
88
88
88
Notes:
1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package.
2. The dominant wavelength, λd , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Color Bin Limits[1]
Blue Color Bins[1]
Bin ID
A
B
C
D
Tolerance: ±1 nm
InGaN Green Color Bins[1]
Dom. Wavelength (nm)
Min.
Max.
460.0
465.0
465.0
470.0
470.0
475.0
475.0
480.0
Bin ID
A
B
C
D
Dom. Wavelength (nm)
Min.
Max.
515.0
520.0
520.0
525.0
525.0
530.0
530.0
535.0
Tolerance: ±1 nm
Note:
1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago
representative for information on currently available bins.
5
Light Intensity (Iv) Bin Limits[1]
Bin ID
A
B
C
Intensity (mcd)
Min.
Max.
0.11
0.18
0.18
0.29
0.29
0.45
D
E
F
G
H
J
K
L
M
0.45
0.72
1.10
1.80
2.80
4.50
7.20
11.20
18.00
0.72
1.10
1.80
2.80
4.50
7.20
11.20
18.00
28.50
Bin ID
N
P
Q
Intensity (mcd)
Min.
Max.
28.50
45.00
45.00
71.50
71.50
112.50
R
S
T
U
V
W
X
Y
112.50
180.00
285.00
450.00
715.00
1125.00
1800.00
2850.00
180.00
285.00
450.00
715.00
1125.00
1800.00
2850.00
4500.00
Tolerance: ±15%
Notes:
1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins.
2. The Iv binning specification set-up is for lowest allowable Iv binning only. There are no upper Iv bin limits.
100
RELATIVE INTENSITY – %
90
BLUE
80
GREEN
70
60
50
40
30
20
10
0
400
600
500
700
WAVELENGTH – nm
1.2
LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
IF – FORWARD CURRENT – mA
100
10
BLUE
1
0.1
GREEN
0.8
0.6
BLUE
0.4
GREEN
0.2
0
2.0
2.5
3.0
3.5
4.0
VF – FORWARD VOLTAGE – V
Figure 2. Forward current vs. forward voltage.
6
1.0
0
5
10
15
20
IF – FORWARD CURRENT – mA
Figure 3. Luminous intensity vs. forward
current.
25
IF MAX – MAXIMUM FORWARD CURRENT – mA
Figure 1. Relative intensity vs. wavelength.
25
20
15
RθJ-A = 500°C/W
10
RθJ-A = 600°C/W
5
0
0
10 20 30 40 50 60 70 80 90
TA – AMBIENT TEMPERATURE – °C
Figure 4. Maximum forward current vs.
ambient temperature.
RELATIVE INTENSITY – %
100
80
60
40
20
0
-90
-70
-50
-30
-10
10
30
50
70
90
30
50
70
90
ANGLE
RELATIVE INTENSITY – %
100
80
60
40
20
0
-90
-70
-50
-30
-10
10
ANGLE
Figure 5. Relative intensity vs. angle for HSMx-C110.
100
RELATIVE INTENSITY
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10 0
10 20 30 40 50 60 70 80 90
ANGLE
100
RELATIVE INTENSITY
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10 0
10 20 30 40 50 60 70 80 90
ANGLE
Figure 6. Relative intensity vs. angle for HSMx-C120.
7
100
RELATIVE INTENSITY – %
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
ANGLE
Figure 7. Relative intensity vs. angle for HSMx-C177 and C197.
100
RELATIVE INTENSITY – %
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
ANGLE
Figure 8. Relative intensity vs. angle for HSMx-C130.
100
RELATIVE INTENSITY – %
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
ANGLE
Figure 9. Relative intensity vs. angle for HSMx-C170, C190, C191, and C150.
100
RELATIVE INTENSITY – %
90
80
70
60
50
40
30
20
10
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
ANGLE
Figure 10. Relative intensity vs. angle for HSMx-C265.
8
10 SEC. MAX.
10 to 30 SEC.
255 - 260 °C
3 °C/SEC. MAX.
4°C/SEC. MAX.
140-160°C
3°C/SEC. MAX.
4°C/SEC.
MAX.
OVER 2 MIN.
TEMPERATURE
TEMPERATURE
230°C MAX.
217 °C
200 °C
6 °C/SEC. MAX.
150 °C
3 °C/SEC. MAX.
TIME
100 SEC. MAX.
60 - 120 SEC.
Figure 11. Recommended reflow soldering profile.
TIME
(Acc. to J-STD-020C)
Figure 12. Recommended Pb-free reflow soldering profile.
5.0 (0.200)
0.9 (0.035)
0.9 (0.035)
1.0 (0.039)
1.2 (0.047)
0.2 (0.008)
CENTERING
BOARD
1.5
(0.059)
2.0
(0.079)
1.5
(0.059)
1.2
(0.047)
1.2
(0.047)
0.9
(0.035)
Figure 13. Recommended soldering pattern for HSMx-C110.
Figure 14. Recommended soldering pattern for HSMx-C170/177.
0.8 (0.031)
1.5 (0.059)
0.8
(0.031)
0.7
(0.028)
0.8
(0.031)
1.5
(0.059)
Figure 15. Recommended soldering pattern
for HSMx-C130/190/191/197.
2.0
(0.079)
1.5
(0.059)
Figure 16. Recommended soldering pattern for HSMx-C150.
0.4 (0.016)
2.2 (0.087) DIA. PCB HOLE
0.4 (0.016)
0.7 (0.028)
1.25 (0.049)
0.15 (0.006)
CENTERING
BOARD
0.8
(0.031)
1.2
(0.047)
0.8
(0.031)
Figure 17. Recommended soldering pattern for HSMx-C120.
NOTE:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
9
1.4
(0.055)
2.3
(0.091)
1.4
(0.055)
Figure 18. Recommended soldering pattern for HSMx-C265.
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 19. Reeling orientation.
;;
;;
;;
;;
;;;
;;
8.0 ± 1.0 (0.315 ± 0.039)
10.50 ± 1.0 (0.413 ± 0.039)
Ø 13.1 ± 0.5
(Ø 0.516 ± 0.020)
Ø 20.20 MIN.
(Ø 0.795 MIN.)
3.0 ± 0.5
(0.118 ± 0.020)
59.60 ± 1.00
(2.346 ± 0.039)
178.40 ± 1.00
(7.024 ± 0.039)
4.0 ± 0.5
(0.157 ± 0.020)
Figure 20. Reel dimensions.
NOTE:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
10
6
PS
5.0 ± 0.5
(0.197 ± 0.020)
;;
;;;;;;
;;
;;;;;; ;
4.00 (0.157)
DIM. C
(SEE TABLE 1)
CATHODE
1.50 (0.059)
0.20 ± 0.05
(0.008 ± 0.002)
0.23 ± 0.05
(0.009 ± 0.002)
FOR HSMR-C130
1.75 (0.069)
3.50 ± 0.05
(0.138 ± 0.002)
DIM. A
(SEE TABLE 1)
8.00 ± 0.30
(0.315 ± 0.012)
;;;
;;;
DIM. B
(SEE TABLE 1)
2.00 ± 0.05
(0.079 ± 0.002)
CARRIER TAPE
USER FEED
DIRECTION
4.00 (0.157)
HSMx-C110/120
POSITION IN
CARRIER TAPE
DIM. A
(SEE TABLE 1)
DIM. B
(SEE TABLE 1)
COVER TAPE
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
PART NUMBER
HSMx-C110 SERIES
HSMx-C120 SERIES
HSMx-C150 SERIES
HSMx-C170 SERIES
HSMx-C177 SERIES
HSMx-C190 SERIES
HSMx-C191 SERIES
HSMx-C197 SERIES
DIM. A
± 0.10 (0.004)
3.40 (0.134)
1.90 (0.075)
3.50 (0.138)
2.30 (0.091)
2.30 (0.091)
1.75 (0.069)
1.85 (0.073)
1.75 (0.069)
DIM. B
DIM. C
± 0.10 (0.004) ± 0.10 (0.004)
1.20 (0.047)
1.70 (0.067)
0.75 (0.030)
1.15 (0.045)
1.27 (0.050)
1.88 (0.074)
0.95 (0.037)
1.45 (0.057)
0.60 (0.024)
1.40 (0.055)
0.90 (0.035)
0.90 (0.035)
0.85 (0.033)
0.88 (0.035)
0.60 (0.024)
0.95 (0.037)
R 1.0 ± 0.05
(0.039 ± 0.002)
FOR HSMx-C110
R 0.5 ± 0.05
(0.020 ± 0.002)
FOR HSMx-C120
;;
;;;;;;
;;
;;;;;;
;;
;;;;;
4.00 (0.157)
CATHODE
1.50 (0.059)
DIM. C
(SEE TABLE 1)
0.20 ± 0.05
(0.008 ± 0.002)
1.75 (0.069)
3.50 ± 0.05
(0.138 ± 0.002)
DIM. A
(SEE TABLE 1)
8.00 ± 0.30
(0.315 ± 0.012)
DIM. B
(SEE TABLE 1)
2.00 ± 0.05
(0.079 ± 0.002)
CARRIER TAPE
USER FEED
DIRECTION
4.00 (0.157)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
PART NUMBER
HSMx-C265 SERIES
Figure 21. Tape dimensions.
NOTE:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
11
COVER TAPE
DIM. A
DIM. B
DIM. C
± 0.10 (0.004) ± 0.10 (0.004) ± 0.10 (0.004)
3.70 (0.146)
1.45 (0.057)
1.30 (0.051)
END
START
Convective IR Reflow
Soldering
For more information on IR
reflow soldering, refer to
Application Note 1060, Surface
Mounting SMT LED Indicator
Components.
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 22. Tape leader and trailer dimensions.
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
For product information and a complete list of distributors, please go to our website:
Storage Condition:
5 to 30°C @ 60% RH max.
Baking is required under the
condition:
a) Humidity Indicator Card is
>10% when read at 23 ± 5°C
b) Device exposed to factory
conditions <30°C/60% RH
more than 672 hours.
Baking recommended condition:
60 ± 5°C for 20 hours.
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0521EN
AV02-0977EN January 10, 2008