High Voltage Power Supply - 250W Series HVP050P5000 HVP050N5000 HVP080P3000 HVP080N3000 HVP125P2000 HVP125N2000 HVP Series The HVP series provide 250 watts of output power up to 125kV. The outputs are fully adjustable from zero to 100% of the maximum rating. Built-in EMI filtering, safety interlocks, overvoltage/over-current arc protection, short circuit protection, and constant voltage/current operation, are just a few of the standard features in this series. Features: • Voltage programming • Current programming • Safety interlock • Short circuit protection • NEMA 12 enclosure • Low ripple ELECTRICAL RATINGS SPECIFICATIONS Input: VMAX IMAX kV mA HVP050P5000 50 5.0 HVP050N5000 -50 5.0 • Less than .5% of Output Current HVP080P3000 80 3.0 Ripple: HVP080N3000 -80 3.0 • Less than 1% of Output Voltage HVP125P2000 125 2.0 • 200 ppm/°C HVP125N2000 -125 2.0 Ambient Temperature: Part Number • 115 or 230V AC, 50/60 Hz Voltage Regulation: • Less than .5% of Output Voltage Current Regulation: at 20% to 100% of Rated Voltage Temperature Coefficient: • Operating: 0°C to 50°C • Storage: -20°C to +70°C Optional HV Cable: • Dielectric Sciences 2121 (Consult factory) Dimensions: In. (mm) • Data subject to change without notice. VOLTAGE MULTIPLIERS INC. 8711 W. Roosevelt Ave. Visalia, CA 93291 TEL 559-651-1402 FAX 559-651-0740 www.voltagemultipliers.com HVP050P5000 HVP050N5000 HVP080P3000 HVP080N3000 HVP125P2000 HVP125N2000 6.8 (173) HV Output 16.0(406) Chassis Ground Stud Input Power/ Fault 16.0 (406) PS FAULT Interface HV ON AC ON Adjustable Mounting Tabs (4 PL) FUNCTION 1 Ground 2 Neutral 3 Line 4 Fault Out 5 Fault Return 6 N/C PIN # FUNCTION PIN # FUNCTION 1 Interlock Out 9 I Program In 2 Interlock In 10 V Program In 3 +12V 11 I Program Out 4 HV Enable 12 V Program Out 5 Local Enable 13 N/C 6 Common 14 N/C 7 I Monitor 15 N/C 8 V Monitor 16 Shield 3 1 2 4 5 6 POWER INPUT PIN # Power Input 10 11 12 13 14 15 16 9 1 2 3 4 5 6 7 8 INTERFACE Interface *Consult factory for cable connnection options. 182