Part Number: www.SunLED.com LMO11D T-1 (3mm) SOLID STATE LAMP Features ●LOW POWER CONSUMPTION. ●POPULAR T-1 DIAMETER PACKAGE. ●GENERAL PURPOSE LEADS. ●RELIABLE AND RUGGED. ●LONG LIFE - SOLID STATE RELIABILITY. ●AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) MO (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 195 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LMO11D Emitting Color Orange Published Date : MAR 26,2008 Emitting Material InGaAlP Operating Characteristics (TA=25°C) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 610 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 601 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 29 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 30 pF Luminous Intensity (IF=20mA) mcd Lens-color Orange Diffused Drawing No : SDSA3523 MO (InGaAlP) V4 min. typ. 280 795 Wavelength nm λP Viewing Angle 2 θ 1/2 610 40 ° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com LMO11D T-1 (3mm) SOLID STATE LAMP MO Published Date : MAR 26,2008 Drawing No : SDSA3523 V4 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LMO11D T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 26,2008 Drawing No : SDSA3523 V4 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 26,2008 LMO11D Drawing No : SDSA3523 LMO11D V4 Checked : B.L.LIU P.4/4