10Base-T Interface Module ELECTRONICS INC. EPE6394 & EPE6394-RC • General Purpose 10Base-T Filter Module • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant • Operating Temperature : 0°C to +70°C Electrical Parameters @ 25° C Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) 5-10 MHz 5-10 MHz @ 30 MHz @ 50 MHz @ 100 MHz @ 200 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv -1.0/-1.0 -15/-15 -32/-25 -30/-30 -25/-25 -25/-25 • Common Mode Rejection (dB Min.) Crosstalk (dB Min.) Schematic Receive Channel 1.00 Max. (25.40) Pin 1 I.D. 1 .270 (6.86) 15 LPF 3 14 1CT:1CT Transmit Channel .120 Min. (3.05) .020 .100 Min. (2.54) (.508) .018/.022 (.457/.599) 16 2 .700 (17.78) .250 Max. (6.35) -30 Isolation : 2000 Vrms • Characteristic Filter Impedance : 100 Ω • Package PCA EPE6394(-RC) Date Code 1-10 MHz 11 6 7 .008/.012 (.203/.305) 10 LPF 8 .300 (7.62) 9 2CT:1CT .300 (7.62) Notes : 1. Lead Finish 2. Peak Solder Rating 3. Weight 4. Packaging Information (Tube) EPE6394 EPE6394-RC SnPb Hot Tin Dip (Sn) † 225°C 260°C 2.1 grams 2.1 grams 19 pieces/tube 19 pieces/tube † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6394 & -RC Rev. 2 3/13/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com