AZ2704 30 AMP POWER RELAY RoHS compliant ! FEATURES • • • • • • 30 Amp switching 30 Amp AC7a approved 900 Amp short circuit current (carrying) PC mount Dielectric strength 4000 Vrms Standard (2.4 mm) or wide contact gap (3.0 mm) available • UL, CUR file E44211 • TÜV certificate R50164753 CONTACTS Arrangement SPST (1 Form X) DPST (2 Form X) Ratings Resistive load: Max. switched power: 840 W or 8310 VA Max. switched current: 30 A Max. switched voltage: 300 VDC* or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at rated load Operate Time (typical) 30 ms at nominal coil voltage 30 A at 277 VAC, resistive, 30k cycles [1][2] 25 A at 277 VAC, resistive, 100k cycles [2] 25 A at 240 VAC, resistive, 100k cycles [1] 3 HP at 240 VAC, 6k cycles [1] 1.5 HP at 120 VAC, 6k cycles [1] TV-10 at 120 VAC, 6k cycles [1] 105 LRA / 20.5 FLA at 240 VAC, 100k cycles [1] Release Time (typical) 30 ms at nominal coil voltage (with no coil suppression) Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH SPST (1 Form X) 10 A at 120 VAC, tungsten, 6k cycles [1][2] 3 HP at 240 VAC, 100k cycles [2] 1.5 HP at 120 VAC, 100k cycles [2] Dropout > 5% of nominal coil voltage (DC) > 15% of nominal coil voltage (AC) Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) at nominal, -40°C (-40°F) to 85°C (185°F) at 50% or less of nominal (holding voltage). Vibration 0.062" DA at 10–55 Hz * Note:If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL GENERAL DATA DPST (2 Form X) 10 A at 277 VAC, tungsten, 6k cycles [2] 10 A at 120 VAC, tungsten, 6k cycles [1] 2 HP at 277 VAC, 75k cycles [2] 1 HP at 125 VAC, 30k cycles [2] Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 2000 Vrms between open contacts Shock 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Operating TÜV 27 A at 240 VAC, cos phi 0.8, 50k cycles [1][2] 25 A at 240 VAC, cos phi 0.4, 50k cycles [1][2] Material Silver cadmium oxide [1], silver tin oxide [2] Enclosure P.B.T. polyester Resistance < 100 milliohm initially (24 V, 1 A voltage drop method) Terminals Tinned copper alloy, PC mount Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 120 grams Packing unit in pcs 16 per plastic tray / 80 per carton box COIL Power At Pickup Voltage (typical) 1.08 W (DC) 1.7 VA (AC) Max. Continuous Dissipation 3.8 W at 20°C (68°F) ambient Temperature Rise 50°C (90°F) at nominal coil voltage Temperature Max. 130°C (266°F) - Class B Max. 155°C (311°F) - Class F NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08 AZ2704 RELAY ORDERING DATA COIL SPECIFICATIONS – DC COIL Nominal Coil VDC 3 6 12 24 48 100 110 200 Must Operate VDC 2.3 4.5 9.0 18.0 36.0 75.0 82.5 150.0 ORDER NUMBER* Max. Continuous VDC 4.2 8.4 16.8 33.7 67.5 140.5 154.7 282.4 Coil Resistance Ohm ± 10% 5 19 75 300 1,200 5,200 6,300 21,000 COIL SPECIFICATIONS – AC COIL 1 Form X 2 Form X AZ2704–1A–3D AZ2704–1A–6D AZ2704–1A–12D AZ2704–1A–24D AZ2704–1A–48D AZ2704–1A–100D AZ2704–1A–110D AZ2704–1A–200D AZ2704–2A–3D AZ2704–2A–6D AZ2704–2A–12D AZ2704–2A–24D AZ2704–2A–48D, AZ2704–2A–100D AZ2704–2A–110D AZ2704–2A–200D ORDER NUMBER* Nominal Coil Must Operate Max. Continuous Coil Current VAC VAC VAC mA ± 10% 6 4.8 6.6 319 12 9.6 13.2 160 24 19.2 26.4 80 48 38.4 52.8 40 120 96.0 132.0 23 220 176.0 242.0 10 240 192.0 264.0 9 * For silver tin oxide add suffix “T”. For wide contact gap add “W”. For Class F add suffix “F”. 1 Form X 2 Form X AZ2704–1A–6A AZ2704–1A–12A AZ2704–1A–24A AZ2704–1A–48A AZ2704–1A–120A AZ2704–1A–220A AZ2704–1A–240A AZ2704–2A–6A AZ2704–2A–12A AZ2704–2A–24A AZ2704–2A–48A AZ2704–2A–120A AZ2704–2A–220A AZ2704–2A–240A MECHANICAL DATA AC-operating COIL PCB LAYOUT 1.441 [36.6] .264 [6.7] .130 [3.3] .043 [1.1] 1.415 [36.0] .697 [17.7] .236 [6.0] * * .335 [8.5] .433 [11.0] .110 x .032 [2.8 x 0.81] .264 .437 .567 .437 [6.7] [11.1] [14.4] [11.1] * Not used on 1 FORM X 1 0 WIRING DIAGRAMS 1.319 [33.5] 0 2 4 6 0 1 1 8 1.989 [50.5] 2 6 4 8 4 2 FORM X 6 1 FORM X Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08 AZ2704 Electrical life at 250 VAC, resistive load Max. DC resistive load breaking capacity 107 50 DC current [A] Number of cycles 30 6 10 10 5 2 1 105 0,5 104 0 3 6 9 12 15 18 21 24 27 30 0,1 10 20 Current [A] 40 50 100 200 300 DC voltage [V] ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany 30 - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08