Document 180-1 SMT Power Inductors – DT3316P Series These magnetically shielded inductors are designed for a wide variety of applications, including board mounted DC-DC converters, miniature power supplies and voltage multiplying circuits. They function equally well in filter and smoothing circuit applications. The Coilcraft DT Series is specially designed to provide the low-loss benefit of ferrite, with a soft saturation characteristic, allowing best performance at both light load and high peak current conditions. For new designs, consider the MSS7341, MSS1038 or MSS1260 as alternatives to this series. These series are more cost effective and offer better current handling. In addition, the MSS7341 is a significantly smaller part. We will continue to manufacture and support the DT3316P indefinitely. Part number1 DT3316P-102ML_ DT3316P-152ML_ DT3316P-222ML_ DT3316P-332ML_ DT3316P-472ML_ DT3316P-682ML_ DT3316P-103ML_ DT3316P-153ML_ DT3316P-223ML_ DT3316P-333ML_ DT3316P-473ML_ DT3316P-683ML_ DT3316P-104ML_ DT3316P-154ML_ DT3316P-224ML_ DT3316P-334ML_ DT3316P-474ML_ DT3316P-684ML_ DT3316P-105ML_ Inductance2 ±20% (µH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 DCR max (Ohms) 0.025 0.030 0.035 0.040 0.045 0.050 0.055 0.060 0.084 0.090 0.11 0.15 0.29 0.36 0.39 0.73 0.88 1.15 1.45 SRF typ (MHz) 60 55 55 50 45 40 35 25 22 18 16 12 9.0 8.0 6.0 5.0 4.0 3.0 2.5 1. When ordering, please specify termination and packaging codes: DT3316P-105MLD Termination: L = RoHS compliant gold over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc. Isat (A)3 20% drop 30% drop 4.5 8.0 4.0 5.5 1.9 3.0 1.6 2.8 1.5 2.4 1.3 2.2 0.80 1.2 0.65 1.1 0.60 1.0 0.55 0.90 0.32 0.50 0.28 0.45 0.28 0.40 0.21 0.35 0.17 0.26 0.13 0.20 0.11 0.18 0.09 0.14 0.085 0.14 Energy storage max (µJoules) 9 12 15 16 10 14 11 12 11 13 13 17 15 15 10 13 13 13 13 Switching frequency max 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 500 kHz 500 kHz 500 kHz 500 kHz 500 kHz 500 kHz 3. DC current at which the inductance drops from its value without current. 4. Current that causes a 10°C temperature rise from 25°C ambient. 5. Ambient temperature range: –40°C to +85°C with Irms current +85°C to +95°C with derated current 6. Storage temperature range: Component: –40°C to +85°C Packaging: –40°C to +80°C 7. Resistance to soldering heat: Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between. 8. Electrical specifications at 25°C. See Qualification Standards section for environmental and test data. See Color Coding section for part marking information. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Irms4 (A) 4.0 4.0 4.0 4.0 3.0 2.5 2.0 1.8 1.5 1.3 1.0 0.90 0.80 0.60 0.50 0.40 0.35 0.30 0.25 Document 180-1 Revised 01/26/09 Document 180-2 SMT Power Inductors – DT3316P Series Typical L ©yvs Current 0.330 dia 8,38 10000 Inductance (µH) 0.370 max 9,40 1000 µH 1000 100 * 0.1 0.01 0.145 3,69 0.100 2,54 1 µH 1 height for optional tin-lead and tin-silver-copper application. 0.200 max 5,08 10 µH 10 an additional 0.02/0,508 *Allow in width and 0.01/0,254 in * 0.510 max 12,95 100 µH 1 0.1 10 Current (A) 0.100 2,54 0.115 2,92 0.110 2,79 0.300 7,62 0.290 7,37 Recommended Land Pattern Part Marking Current Derating (or) Multiplier 90 80 Weight: 0.86 – 1.06 g Tape and reel: 1000/13″ reel 24 mm tape width For packaging data see Tape and Reel Specifications section. 70 60 50 40 30 20 25°C Percent of rated current 100 Dash number XXX 120 110 Internal code XX XX 1st significant digit 2nd significant digit Isat Irms 10 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature (°C) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 180-2 Revised 01/26/09