K3500G Series 8 pin DIP, 3.3 Volt, CMOS, Clock Oscillator K3500G Series THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M3H PRODUCT SERIES.3.3V Crystal Clock Oscillators 4-pin Package, Compatible with 8-pin DIL 1.0MHz to 70MHz Frequency Range CMOS Compatible Tight Symmetry (45/55%) Available Tri-State Option Available ±100ppm Stability Standard - K3500GC Tighter Stabilities Available ��� ��� ��� � � � � �� ������������������ � ������� ±25ppm Stability:- K3500GA ±50ppm Stability:- K3500GB Case Ground for EMI Protection �� ��� ��� � � �� �� �� �� � � ��� ����� E L E C T R I C A L S P E C I F I C AT I O N S MODEL K3500GA K3500GB Frequency Range (MHz) K3500GC 1.0 to 125 Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±25 ±50 ±100 -40°C to 85°C N/A ±50 ±100 Temperature Range (°C) Operating -40°C to +85°C Storage -55°C to +125°C Supply Voltage (V) +3.3 ±5% Supply Current (mA) <30 Output CMOS “0” Level (VOL) 0.9 VCC “1” Level (VOH) 0.1 VCC Load Up to 80MHz 50pF; >80MHz 30pF TR & TF (ns) <10 Symmetry (%) 40/60 Jitter (Typical) 10ps RMS @ 100MHz Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K3500GXXXX - Specify Frequency “Blank” = Fixed Frequency “E” = Tri-State “Blank” = 0oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “Blank” = 40/60% Symmetry “S” = 45/55 Symmetry “A” ±25ppm Frequency Stability (Available 0/70oC only) “B” = ±50 ppm Frequency Stability “C” = ±100ppm Frequency Stability “D” = ±20ppm Frequency Stability MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 1 Revision: 03-02-07 K3500G Series K3500G Series 8 pin DIP, 3.3 Volt, CMOS, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 3.3V Crystal Clock Oscillators PLEASE REFER TO THE M3H PRODUCT SERIES. PIN FUNCTION 1 N/C / Tri-State 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum MtronPTI2553 reservesN. theEdgington right to make changes to theFranklin product(s) and service(s) without notice. No liability is assumed as a result of their use or application. Street, Park, IL described 60131herein y Phone: 847.451.1000 y Fax: 847.451.7585 Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com 2 Revision: 03-02-07