LED-20W Series Switch Mode LED Drivers with Isolation, Constant Current, Dimming & Constant Voltage Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <15.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.25 Amps max at 120 Vac Efficiency: 85% typical at max load Maximum Power: 20W Line Regulation: ± 2% Load Regulation: ± 3% THD: < _ 20% @ > _ 70% load 100-230V, > _ 80% load 277V Leakage Current: 300 µA Typical Hold Up Time: Half Cycle Output Protection: Over-Voltage, Over-Current, and Short Circuit Protection with Auto Recovery Environmental Specifications • Total Power: 20 Watts • IP66 & NEMA4 • Input Voltage: 100-277 Vac Nom. • High Power Factor • UL Dry & Damp Location Rated • UL Sign Components Manual (S.A.M. Models) Models Constant Current - Product Specifications Model Number Output Current Output Voltage Max. Output Typical (mA ±4%) Range (Vdc) Power (W) Efficiency LED20W-57-C0350-XX 350 19-57 20 84% LED20W-48-C0350-XX 350 16-48 16.8 83% Minimum Starting Temp: -30ºC LED20W-43-C0460-XX 460 15-43 20 83% Storage Temperature: -40ºC to +85ºC LED20W-40-C0500-XX 500 14-40 20 82% Maximum Case Temp. 90°C Humidity: 5% to 95% Cooling: Convection Sound Rating: Class A LED20W-22-C0910-XX 910 7-22 20 81% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED20W-18-C1100-XX 1100 6-18 20 80% MTBF: 488,000 Hours at full load and 40ºC ambient conditions per MIL-217F Notice 2 LED20W-15-C1330-XX 1330 5-15 20 80% LED20W-13-C1540-XX 1540 4-13 20 79% 5.8 oz (165 grams) typical LED20W-12-C1660-XX 1660 4-12 20 78% Weight: LED20W-36-C0550-XX 550 12-36 20 82% LED20W-28-C0700-XX 700 10-28 20 81% LED20W-24-C0700-XX 700 8-24 16.8 81% LED20W-24-C0830-XX 830 8-24 20 81% -XX indicates dimming options are available. See options at left. Blank = fixed current output Constant Voltage - Product Specifications Model Number LED20W-12 Ordering Options: -D: -PD: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers. See page 3 for additional specifications. PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications. Sign Components Manual • Output Voltage Output Current (Vdc ±5%) Range (mA) Max. Output Power (W) Typical Efficiency 12 415-1660 20 82% 13 385-1540 20 82% LED20W-15 15 333-1330 20 83% LED20W-18 18 275-1100 20 83% LED20W-22 22 228-910 20 84% 24 208-830 20 84% LED20W-13 LED20W-24 LED20W-28 • 28 175-700 20 84% LED20W-36 36 138-550 20 85% LED20W-40 40 125-500 20 85% LED20W-43 43 115-460 20 85% LED20W-48 48 88-350 16.8 85% LED20W-57 57 88-350 20 E332160 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Class 2: 85% • Indicates S.A.M. US/Canada US Only Rev 9-11-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED20W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 4 Dimensions - IN [mm] 0.20 [5] 5.91 Min [150 Min] WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. Dimming Purple (+) Gray (-) 0.79 [20] Input White (N) Black (L) 0.55 [14] Tc = 90°C max 0.39±0.04 [10.0±1] 0.39±0.04 [10.0±1] 0.20 [5] 1.87 [47.5] 5.91 Min [150 Min] 0.16 [4] 0.39 [10] 1.61 [41] Power Factor / Load 1.00 35% 0.80 30% 0.70 25% THD 0.60 PF THD / Load 40% 0.90 0.50 120Vac 277Vac 20% 0.40 15% 0.30 120Vac 277Vac 0.20 10% 5% 0.10 0.00 50% 60% 70% 80% 90% Load 100% Lifetime / Case Temperature 0% 50% 60% 70% 100% (LED20W-028-C0700-D) Efficiency Lifetime (kHrs) 95% 75 60 45 30 90% 50 55 60 65 70 75 80 85 90 UL8750, CSA-C22.2 EN61347 Class B Class C 120Vac 277Vac 80% Case Hotspot Temperature (°C) 100% 85% 15 45 90% UL/CUL CE FCC, 47CFR Part 15 EN61000-3-2 EN61000-3-3 115 90 80% Load Safety and EMC Compliance Typical Efficiency / Load 130 0 40 Output Red (+) Blue (-) 0.98 [25] 0.55 [14] 3.74 [95] 75% 50% Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) 60% 70% 80% 90% Normalized Output Voltage 100% UL Conditions of Acceptability See website for additional information Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED20W Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 4 “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0mA -2.0 V 0mA — — — 2mA +15 V 1.2mA Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire Sink Current into 0-10V Purple Wire Typical Dimming Circuit Dim (+) Purple LED20W-xxx-Cxxxx-D IP710 Wall Dimmer Dim (-) Gray (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Input Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V Dimming Input (Vdc) 7V 8V 9V 10V Notes: 1. 2. 3. 4. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent 0-10V dimmable version output will be < _ 10% @ 0-1.0V 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED20W Series SSL Solutions Faster Than The Speed Of Light® Pg 4 of 4 “-PD” Option: PWM Dimming Parameters Absolute Maximum Voltage Range on PWM Input (Purple Wire) Input LOW Level Voltage Range (Purple Wire) Input HIGH Level Voltage Range (Purple Wire) Current into PWM Input (Purple Wire) Source Current out of PWM Input (Purple Wire) PWM Input Signal Frequency PWM Input Signal Positive Duty Cycle Minimum Typical Maximum -2.0 V -2.0 V +9.0 V 0 mA 0 mA 500 Hz 0% 10 V 0V 10 V — — — 10-90% +15 V +5.5 V +15 V 1.2 mA 2 mA 1500 Hz 100% PWM Positive Dimming Typical Circuit PWM (+) Purple LED20W-xxx-Cxxxx-PD Output Current / 1.0kHz Positive Duty Cycle Output Current % 100 90 80 70 60 50 40 30 20 10 0 PWM In Sink PWM (-) Gray 0% 10% 20% 30% 40% 50% 60% Positive Duty Cycle 70% 80% 90% 100% Notes: 1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side. 2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to dim below 5% at 0% Duty Cycle. 3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com