DF005S - DF10S Bridge Rectifiers DF005S - DF10S Bridge Rectifiers Features • Surge overload rating: 50 amperes peak. • Glass passivated junction. • Low leakage. • UL certified, UL #E111753. ~ ~ + SDIP - Absolute Maximum Ratings * Symbol Ta = 25°C unless otherwise noted Parameter Value 005S 01S 02S 04S 06S 08S 10S Units VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V IF(AV) Average Recitified Forward Current @ TA = 40°C IFSM Non-Repetitive Peak Forward Surge Current 8.3ms Single Half-Sine-Wave TSTG TJ 1.5 A 50 A Storage Temperature Range -55 to +150 °C Operating Junction Temperature -55 to +150 °C * These ratings are limiting values above which the serviceability of any semiconductor device may by impaired. Thermal Characteristics Symbol Parameter Value Units PD Power Dissipation 3.1 W RθJA Thermal Resistance, Junction to Ambient, * per leg 40 °C/W Value Units * Device mounted on PCB with 0.5 × 0.5” (13 × 13mm). Electrical Characteristics Symbol TC = 25°C unless otherwise noted Parameter VF Forward Voltage, per element @ 1.0A 1.1 V IR Reverse Current, per element @ Rated VR TA = 25°C TA = 125°C 50 500 µA µA I2t Rating for Fusing 10 A2s 25 pF CT t < 8.35ms Total Capacitance, per leg VR = 4.0v, f = 1.0MHz ©2005 Fairchild Semiconductor Corporation DF005S - DF10S Rev. C1 1 www.fairchildsemi.com Figure 2. Forward Current Derating Curve Average Rectified Forward Current, IF[A] Peak Forward Surge Current, IFSM[A] Figure 1. Non-Repetitive Surge Current 50 40 30 20 10 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Figure 3. Forward Voltage Characteristics 0.5 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE (º C) 160 10 Reverse Current, IR[µA] Forward Current, IF[A] 1 Figure 4. Reverse Current vs Reverse Voltage 10 1 0.1 0.01 0.4 1.5 TA = 25º C µs Pulse Width = 200µ 0.6 DF005S - DF10S Rev. C1 0.8 1 1.2 FORWARD VOLTAGE (V) T A = 100 º C 1 0.1 TA = 25 º C 0.01 1.4 2 0 20 40 60 80 100 120 NORMALIZED REVERSE VOLTAGE (%) 140 www.fairchildsemi.com DF005S - DF10S Bridge Rectifiers Typical Performance Characteristics The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ ActiveArray™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FAST® FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I15 3 DF005S - DF10S Rev. C1 www.fairchildsemi.com DF005S - DF10S Bridge Rectifiers TRADEMARKS