Vishay MBR10H50 Schottky barrier rectifier Datasheet

MBR(F,B)10H35 thru MBR(F,B)10H60
Vishay General Semiconductor
Schottky Barrier Rectifier
High Barrier Technology for Improved High Temperature Performance
TO-220AC
FEATURES
• Guardring for overvoltage protection
ITO-220AC
• Lower power losses, high efficiency
• Low forward voltage drop
• Low leakage current
2
• High frequency operation
1
1
MBR10Hxx
• High forward surge capability
2
MBRF10Hxx
PIN 1
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
PIN 1
CASE
PIN 2
PIN 2
• Solder dip 260 °C, 40 s (for TO-220AC and
ITO-220AC package)
TO-263AB
K
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
2
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of
switching mode power supplies, freewheeling diodes,
dc-to-dc converters or polarity protection application.
1
MBRB10Hxx
PIN 1
PIN 2
K
HEATSINK
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV)
10 A
VRRM
35 V to 60 V
IFSM
150 A
VF
0.55 V, 0.61 V
IR
100 µA
TJ max.
175 °C
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR10H35
MBR10H45
MBR10H50
MBR10H60
UNIT
Maximum repetitive peak reverse voltage
VRRM
35
45
50
60
V
Working peak reverse voltage
VRWM
35
45
50
60
V
Maximum DC blocking voltage
VDC
35
45
50
60
V
Maximum average forward rectified current (Fig. 1)
IF(AV)
10
A
Non-repetitive avalanche energy at 25 °C, IAS = 4 A, L = 10 mH
EAS
80
mJ
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
150
A
Peak repetitive reverse current at tp = 2.0 µs, 1 kHz
IRRM
1.0
0.5
A
Peak non-repetitive reverse energy (8/20 µs waveform)
ERSM
20
10
mJ
Electrostatic discharge capacitor voltage human body model:
C = 100 pF, R = 1.5 kΩ
Voltage rate of change (rated VR)
Document Number: 88780
Revision: 19-May-08
VC
25
kV
dV/dt
10 000
V/µs
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
MBR(F,B)10H35 thru MBR(F,B)10H60
Vishay General Semiconductor
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR10H35
MBR10H45
MBR10H50
MBR10H60
UNIT
TJ
- 65 to + 175
°C
Storage temperature range
TSTG
- 65 to + 175
°C
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
VAC
1500
V
Operating junction temperature range
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum instantaneous forward voltage (1)
IF = 10 A
IF = 10 A
IF = 20 A
IF = 20 A
Maximum reverse current at rated VR (2)
SYMBOL
MBR10H35
MBR10H45
MBR10H50
MBR10H60
TYP.
MAX.
TYP.
MAX.
UNIT
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C
TJ = 125 °C
VF
0.49
0.62
0.63
0.55
0.75
0.68
0.57
0.68
0.71
0.61
0.85
0.71
V
TJ = 25 °C
TJ = 125 °C
IR
4.0
100
12
2.0
100
12
µA
mA
Notes:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
Maximum thermal resistance
SYMBOL
MBR
MBRF
MBRB
UNIT
RθJC
2.0
4.0
2.0
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
MBR10H45-E3/45
1.80
45
50/tube
Tube
ITO-220AC
MBRF10H45-E3/45
1.94
45
50/tube
Tube
TO-263AB
MBRB10H45-E3/45
1.33
45
50/tube
Tube
TO-263AB
MBRB10H45-E3/81
1.33
81
800/reel
Tape and reel
TO-220AC
MBR10H45HE3/45 (1)
1.80
45
50/tube
Tube
ITO-220AC
MBRF10H45HE3/45 (1)
1.94
45
50/tube
Tube
TO-263AB
MBRB10H45HE3/45 (1)
1.33
45
50/tube
Tube
TO-263AB
MBRB10H45HE3/81 (1)
1.33
81
800/reel
Tape and reel
Note:
(1) Automotive grade AEC Q101 qualified
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88780
Revision: 19-May-08
MBR(F,B)10H35 thru MBR(F,B)10H60
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
100
Instantaneous Reverse Leakage
Current (mA)
Average Forward Current (A)
15
MBR, MBRB
10
MBRF
5
TJ = 150 °C
1
TJ = 125 °C
0.1
MBR10H35 - MBR10H45
MBR10H50 - MBR10H60
0.01
0.001
TJ = 25 °C
0.0001
0
0
25
50
75
100
125
150
0
175
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Figure 1. Forward Current Derating Curve
Figure 4. Typical Reverse Characteristics
175
10 000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = TJ max.
8.3 ms Single Half Sine-Wave
150
Junction Capacitance (pF)
Peak Forward Surge Current (A)
10
125
100
75
50
25
MBR10H35 - MBR10H45
MBR10H50 - MBR10H60
1000
100
1
10
100
0
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Figure 5. Typical Junction Capacitance
10
10
TJ = 150 °C
TJ = 25 °C
1
TJ = 125 °C
0.1
MBR10H35 - MBR10H45
MBR10H50 - MBR10H60
0.01
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
1
0.1
0.01
0.1
1
10
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 6. Typical Transient Thermal Impedance
Document Number: 88780
Revision: 19-May-08
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
MBR(F,B)10H35 thru MBR(F,B)10H60
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AC
TO-220AC
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
2
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.022 (0.56)
0.014 (0.36)
0.205 (5.20)
0.195 (4.95)
7° REF.
0.191 (4.85)
0.171 (4.35)
CASE
0.037 (0.94)
0.027 (0.68)
7° REF.
2
1
0.560 (14.22)
0.530 (13.46)
PIN 1
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.110 (2.79)
0.100 (2.54)
PIN 2
0.105 (2.67)
0.095 (2.41)
0.671 (17.04)
0.651 (16.54)
PIN
1.148 (29.16)
1.118 (28.40)
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
7° REF.
0.076 (1.93) REF.
45° REF.
0.635 (16.13)
0.625 (15.87)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.055 (1.40)
0.045 (1.14)
Mounting Pad Layout
0.42 (10.66) MIN.
K
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.33 (8.38) MIN.
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88780
Revision: 19-May-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages