MBH Series Oscillator Industry Standard Package RoHS Compliant Available Tri-state Function Wide Frequency Range Frequency Range Frequency Stability (Inclusive of Temperature, Load, Voltage and Aging) Operating Temperature Storage Temperature Waveform Logic “0” Logic “1” Duty Cycle Load Start Up Time 20.000kHZ to 200.000MHz See Part Number Guide See Part Number Guide -55°C to +125°C HCMOS 10% Vdd max 90% Vdd min See Part Number Guide 10 TTL Gates or 50pF max 10mSec max Up to 24.000MHz 10 nSec max 24.001MHz to 70.000MHz 6 nSec max Rise/Fall Time 70.001MHz to 100.000MHz 100.001MHz to 200.000MHz Supply Voltage (VDC ±10%) 20.000kHz to 24.000MHz 24.001MHz to 50.000MHz 50.001MHz to 70.000MHz 70.001MHz to 200.000MHz 24.000MHz to 30.000MHz 30.001MHz to 80.000MHz +5.0 20mA 30mA 50mA 60mA NA NA Mechanical & Environmental Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 4 nSec max 2 nSec max +3.3 10mA 20mA 25mA 35mA NA NA +2.5/+1.8 NA NA NA NA 20mA 40mA Marking Detail Line 1 = MXXXXX M = XXXXX = Line 2 = SYYWWL S = YYWW = MMD Frequency in MHZ Internal Code 4 Digit Date Code (Year / Week) Denotes RoHS Compliant L = Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 02/07/11 J Pg 1 of 2 Part Number Guide FREQUENCY MBH 8 pin DIP Blank = Not Compliant F = Is RoHS Compliant Frequency Stability Supply Voltage 5 = +5.0 VDC 3 = +3.3 VDC 2 = +2.5 VDC 1 = +1.8 VDC 010 = ±10 ppm 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Value Added Options Blank = No Added Options G1 = Gull-Wing (option 1) G = Gull-Wing (option 2) CLXXX = Cut Leads XXX = Lead Length Code Symmetry Blank = 40/60% A = 45/55% B = 47.5/52.5% RoHS Compliant Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C 08 = 0°C TO +85°C Pin 1 Connection Blank = No Connect H = Tri-state PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS Mechanical Details 12.90 [.508] MAX 5.80 [.228] MAX 5.33 [.210] MIN Pin Connections Pin 1 N/C or Tri-state Pin 4 Case Ground Pin 5 Output Pin 8 Supply Voltage 0.90 [.035] 0.46 [.018] 7.62 [.300] 8 5 12.90 [.508] MAX 7.62 [.300] 1 Dimensions in Brackets are in Inches External Bypass Capacitor Recommended 4 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice 02/07/11 J Pg 2 of 2