GBL005 - GBL10 Taiwan Semiconductor CREAT BY ART 4A, 50V - 1000V Glass Passivated Single Phase Bridge Rectifiers FEATURES - Glass passivated junction - Ideal for printed circuit board - High case dielectric strength - Typical IR less than 0.1μA - UL Recognized File # E-326243 + - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 ~ ~ – GBL MECHANICAL DATA Case: GBL Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Weight: 2 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL GBL GBL GBL GBL GBL GBL GBL 005 01 02 04 06 08 10 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current @TC=50°C @TA=40°C IF(AV) 4 3 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A Rating for fusing (t<8.3ms) I2t 93 A2s Maximum instantaneous forward voltage (Note 1) @2A @4A VF 1.0 1.1 V Maximum reverse current @ rated VR TJ=25°C TJ=125°C Typical junction capabitance Typical thermal resistance Operating junction temperature range Storage temperature range 5 500 IR CJ 95 μA 40 pF RθJC RθJL RθJA 8 13 32 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Document Number: DS_D1408053 Version: J15 GBL005 - GBL10 Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING SUFFIX CODE PACKING CODE SUFFIX (*) PACKAGE PACKING GBL 25 / Tube GBL 25 / Tube / Forming GBL 25 / Tube C2 GBLxx (Note 1) H X0 G D2 Note 1: "xx" defines voltage from 50V (GBL005) to 1000V (GBL10) *: Optional available EXAMPLE PREFERRED P/N PART NO. GBL10HC2G GBL10 PART NO. SUFFIX PACKING CODE PACKING CODE H DESCRIPTION SUFFIX C2 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) 5 Heat-sink Mounting 2"x3"x0.25" Al-Plate 4 3 2 P.C.B. Mounting 0.5"x0.5" copper pads 1 0 0 20 40 60 80 100 120 140 160 FIG. 2 TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 10 TJ=125oC 1 0.1 TJ=25oC 0.01 0 AMBIENT TEMPERATURE (oC) 20 40 60 80 100 120 140 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 150 125 8.3ms Single Half Sine Wave 100 75 50 25 0 1 10 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D1408053 100 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 1 0.1 0.4 0.6 0.8 1 1.2 FORWARD VOLTAGE (V) 1.4 1.6 Version: J15 GBL005 - GBL10 Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) A 1000 f=1.0MHz Vslg=50mVp-p 50V-400V 100 600V-1000V 10 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS GBL DIM. Unit (mm) Unit (inch) Min Max Min Max A 19.70 20.30 0.776 0.799 B 2.30 2.70 0.091 0.106 C 1.30 2.00 0.051 0.079 D 0.90 1.10 0.035 0.043 E 4.80 5.20 0.189 0.205 F 10.70 11.30 0.421 0.445 G 2.30 2.70 0.091 0.106 H 13.00 14.00 0.512 0.551 I 3.30 3.70 0.130 0.146 J 0.80 1.20 0.031 0.047 K 0.40 0.60 0.016 0.024 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Document Number: DS_D1408053 Version: J15 GBL005 - GBL10 Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1408053 Version: J15