Part Number: LM2BG01W 10mm SOLID STATE LAMP www.SunLED.com PRELIMINARY SPEC Features ●10mm DIAMETER BIG LAMP. ●I.C. COMPATIBLE. ●RELIABLE AND RUGGED. ●LONG LIFE - SOLID STATE RELIABILITY. ●RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2BG (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 111 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) 1000 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds LM2BG01W Emitting Color Green Published Date : MAR 22,2008 Emitting Material InGaN M2BG (InGaN) Unit Forward Voltage (Typ.) (IF=20mA) VF 3.2 V Forward Voltage (Max.) (IF=20mA) VF 3.7 V Reverse Current (Max.) (VR=5V) IR 10 uA °C Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 525 nm V Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 535 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 39 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 65 pF mW Lead Solder Temperature [2mm Below Package Base] Part Number Operating Characteristics (TA=25°C) Lens-color Water Clear Drawing No : SDSA6546 Luminous Intensity (IF=20mA) mcd min. typ. 8000 17990 V1 Wavelength nm λP Viewing Angle 2 θ 1/2 525 15° Checked : B.L.LIU P.1/4 Part Number: LM2BG01W 10mm SOLID STATE LAMP www.SunLED.com M2BG Published Date : MAR 22,2008 Drawing No : SDSA6546 V1 Checked : B.L.LIU P.2/4 Part Number: LM2BG01W 10mm SOLID STATE LAMP www.SunLED.com Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 22,2008 Drawing No : SDSA6546 V1 Checked : B.L.LIU P.3/4 Part Number: 10mm SOLID STATE LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 22,2008 LM2BG01W Drawing No : SDSA6546 LM2BG01W V1 Checked : B.L.LIU P.4/4