10/100 BASE-T SINGLE PORT • RoHS Compliant Product • Inductance: 350µH Min @ 100KHz, 0.1VRMS with 8mA DC • Hipot: 1500VRMS • Add L after part no. for low profile (height = 0.086”/2,20mm) • Add X after part no. for extended operating temperature: -40°C to +85°C (not applicable to low profile package) ELECTRICAL SPECIFICATION @ 25°C PART NUMBER N31100S N31101S N31102S N31103S N31104S N31105S N31106S N31188S N31260S TURNS RATIO TX 2:1 1.25:1 1:1 1:1.414 1:1 1:1 1:1 1:1 1:1 RX 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 INSERTION LOSS 0.1-100MHz (dB) Max 1:1 -1.1 -1.1 -1.1 -1.0 -1.0 0.9 -1.1 -1.1 RETURN LOSS (dB) TYP DCMR (dB) TYP CROSS TALK (dB) TYP SCHEMAITC 30MHz 60MHz 80MHz 30MHz 50MHz 100MHz 30MHz 60MHz 100MHz -20 -14 -11.5 -42 -37 -33 -45 -40 -35 -20 -14 -11.5 -42 -37 -33 -45 -40 -35 -20 -14 -11.5 -42 -37 -33 -45 -40 -35 -18 -12 -11.5 -42 -37 -33 -45 -40 -35 -18 -14 -12 -40 -40 -40 -35 -35 -35 -20 -14 -12 -42 -37 -32 -45 -40 -35 -18 12 -11 -40 -35 -30 -45 -45 -37 -20 -14 -12 -42 -37 -32 -45 -40 -35 -16 -10 -10 -42 -37 -32 -45 -40 -33 Mechanical A A A A C C B A C Schematic B A C Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.015 .XXX : ±0.004 mm: X,X : ± 0,38 X,XX : ±0,10 Product performance is limited to specified parameter. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: (310) 325-1043 Fax: (310) 325-1044 N311XXS 0602JW www.mpsind.com [email protected]