Ceramic Balun RF Transformer 50Ω NCS4-102+ 700 to 1000 MHz1:4 Ratio Maximum Ratings Operating Temperature Storage Temperature Input RF Power Features -40°C to 85°C -55°C to 100°C 2W Permanent damage may occur if any of these limits are exceeded. CASE STYLE: GE0805C-1 • wideband, 700 to 1000 MHz • low phase unbalance, 5 deg and amplitude unbalance, 0.5 dB typ. • miniature size, 0.079”x0.049”x0.033” • LTCC construction • low cost • aqueous washable +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Pad Connections PRIMARY DOT (Unbalanced Port) PRIMARY (GND) SECONDARY DOT (Balanced) SECONDARY (Balanced) NO CONNECTION (Isolate) GND Externally 1 2 4 6 3 5 Reel Size 7” • LTE • radar • cellular Electrical Specifications1 at 25°C Parameter Frequency (MHz) Min. Typ. Impedance Ratio (Secondary/Primary) Pads 2,4,5 are DC connected internally. PCB Land Pattern Max. Unit 4 Frequency Range Outline Drawing and Reel Available Tape st at no extra co Devices/Reel 20, 50, 100, 200, 500,1000, 2000 700 1000 MHz Insertion Loss 700 - 1000 — 0.9 1.3 dB Amplitude Unbalance 700 - 1000 — 0.5 — dB Phase Unbalance at Secondary† 700 - 1000 — 5 — Degree 1. Measured on Demo board TB-628+ † Relative to 180° INDEX AREA* Typical Performance Data Suggested L ayout, T olerance to be within ±.002 FREQUENCY (MHz) INSERTION LOSS (dB) 700.00 730.00 760.00 790.00 820.00 850.00 880.00 910.00 940.00 1000.00 0.87 0.81 0.77 0.74 0.72 0.70 0.70 0.69 0.70 0.71 *Shape of index marking may vary Outline Dimensions ( inch mm ) C .033 0.84 D .014 0.36 G .026 0.66 H .014 0.36 J .039 1.00 K .110 2.80 E .012 0.30 F .012 0.30 wt grams .008 Demo Board MCL P/N: TB-628+ Suggested PCB Layout (PL-354) NCS4-102+ INSERTION LOSS 1.2 0.8 0.6 0.4 750 0.40 0.33 0.25 0.17 0.09 0.00 0.09 0.17 0.26 0.45 2.59 2.32 1.98 1.59 1.15 0.65 0.09 0.52 1.17 2.67 NCS4-102+ AMPLITUDE UNBALANCE 950 1000 0.6 0.4 0.2 0.0 700 750 800 850 900 FREQUENCY (MHz) 950 1000 NCS4-102+ PHASE UNBALANCE 6.0 PHASE UNBALANCE (Deg) 800 850 900 FREQUENCY (MHz) PHASE UNBALANCE† (deg.) 0.8 1.0 0.2 700 AMPLITUDE UNBALANCE (dB) 13.12 14.07 14.86 15.48 15.91 16.14 16.15 16.01 15.76 15.04 AMPLITUDE UNBALANCE (dB) B .049 1.24 INSERTION LOSS (dB) A .079 2.01 INPUT R. LOSS (dB) configuration J 5.0 4.0 NO CONNECTION* PRI 3.0 2.0 SEC *Internal open circuit 1.0 0.0 700 750 800 850 900 FREQUENCY (MHz) 950 1000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. B M151107 NCS4-102+ WZ/CP/AM 180124