AD ADG1202 Low capacitance, low charge injection, â±15 v/12 v icmos spst in sot-23 Datasheet

Low Capacitance, Low Charge Injection,
±15 V/+12 V iCMOS SPST in SOT-23
ADG1201/ADG1202
FUNCTIONAL BLOCK DIAGRAM
2.4 pF off capacitance
<1 pC charge injection
Low leakage; 0.6 nA maximum @ 85°C
120 Ω on resistance
Fully specified at ±15 V, +12 V
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
6-lead SOT-23 package
ADG1201
S
ADG1202
D
S
IN
SWITCHES SHOWN FOR A LOGIC “1” INPUT
D
IN
06576-001
FEATURES
Figure 1.
APPLICATIONS
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Audio signal routing
Video signal routing
Communication systems
GENERAL DESCRIPTION
The ADG1201/ADG1202 are monolithic complementary
metal-oxide semiconductor (CMOS) devices containing
an SPST switch designed in an iCMOS® (industrial CMOS)
process. iCMOS is a modular manufacturing process
combining high voltage CMOS and bipolar technologies.
It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint
that no previous generation of high voltage parts has been
able to achieve. Unlike analog ICs using conventional
CMOS processes, iCMOS components can tolerate high
supply voltages while providing increased performance,
dramatically lower power consumption, and reduced
package size.
The ultralow capacitance and charge injection of these
switches make them ideal solutions for data acquisition
and sample-and-hold applications, where low glitch and fast
settling are required. Fast switching speed coupled with
high signal bandwidth make the parts suitable for video
signal switching.
iCMOS construction ensures ultralow power dissipation,
making the parts ideally suited for portable and batterypowered instruments.
The ADG1201/ADG1202 contain a single-pole/single-throw
(SPST) switch. Figure 1 shows that with a logic input of 1, the
switch of the ADG1201 is closed and that of the ADG1202 is
open. Each switch conducts equally well in both directions when
on and has an input signal range that extends to the supplies. In
the off condition, signal levels up to the supplies are blocked.
PRODUCT HIGHLIGHTS
1.
2.
3.
4.
5.
6.
Ultralow capacitance.
<1 pC charge injection.
Ultralow leakage.
3 V logic-compatible digital inputs: VIH = 2.0 V, VIL = 0.8 V.
No VL logic power supply required.
SOT-23 package.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2008 Analog Devices, Inc. All rights reserved.
ADG1201/ADG1202
TABLE OF CONTENTS
Features .............................................................................................. 1
Absolute Maximum Ratings ............................................................5
Applications ....................................................................................... 1
ESD Caution...................................................................................5
Functional Block Diagram .............................................................. 1
Pin Configuration and Function Descriptions..............................6
General Description ......................................................................... 1
Typical Performance Characteristics ..............................................7
Product Highlights ........................................................................... 1
Test Circuits ..................................................................................... 10
Revision History ............................................................................... 2
Terminology .................................................................................... 12
Specifications..................................................................................... 3
Outline Dimensions ....................................................................... 13
Dual Supply ................................................................................... 3
Ordering Guide .......................................................................... 13
Single Supply ................................................................................. 4
REVISION HISTORY
2/08—Revision 0: Initial Version
Rev. 0 | Page 2 of 16
ADG1201/ADG1202
SPECIFICATIONS
DUAL SUPPLY
VDD = 15 V ± 10%, VSS = −15 V ± 10%, GND = 0 V, unless otherwise noted.
Table 1.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Flatness (RFLAT(ON))
LEAKAGE CURRENTS
Source Off Leakage, IS (Off )
Drain Off Leakage, ID (Off )
Channel On Leakage, ID, IS (On)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
25°C
B Version1
−40°C to
−40°C to
+85°C
+125°C
VDD to VSS
120
200
20
60
±0.004
±0.1
±0.004
±0.1
±0.04
±0.15
240
270
72
79
±0.6
±1
±0.6
±1
±0.6
±1
2.0
0.8
0.005
±0.1
Digital Input Capacitance, CIN
DYNAMIC CHARACTERISTICS2
tON
tOFF
Charge Injection
Off Isolation
Total Harmonic Distortion + Noise
−3 dB Bandwidth
CS (Off )
CD (Off )
CD, CS (On)
POWER REQUIREMENTS
IDD
2.5
140
170
90
105
−0.8
80
0.15
660
2.4
3
2.8
3.3
4.7
5.6
200
230
130
141
0.001
1.0
IDD
60
95
ISS
0.001
VDD/VSS
1
2
1.0
±5 to ±16.5
Temperature range for B version is −40°C to +125°C.
Guaranteed by design, not subject to production test.
Rev. 0 | Page 3 of 16
Unit
Test Conditions/Comments
V
Ω typ
Ω max
Ω typ
Ω max
VDD = +13.5 V, VSS = −13.5 V
VS = ±10 V, IS = −1 mA; see Figure 20
VS = −5 V, 0 V, and +5 V; IS = −1 mA
nA typ
nA max
nA typ
nA max
nA typ
nA max
V min
V max
μA typ
μA max
pF typ
ns typ
ns max
ns typ
ns max
pC typ
dB typ
% typ
MHz typ
pF typ
pF max
pF typ
pF max
pF typ
pF max
μA typ
μA max
μA typ
μA max
μA typ
μA max
V min/max
VDD = +16.5 V, VSS = −16.5 V
VS = ±10 V, VD = ±10 V; see Figure 21
VS = ±10 V, VD = ±10 V; see Figure 21
VS = VD = ±10 V; see Figure 22
VIN = VINL or VINH
RL = 300 Ω, CL = 35 pF
VS = 10 V; see Figure 26
RL = 300 Ω, CL = 35 pF
VS = 10 V; see Figure 26
VS = 0 V, RS = 0 Ω, CL = 1 nF; see Figure 27
RL = 50 Ω, CL = 5 pF, f = 1 MHz; see Figure 23
RL = 10 kΩ, 5 V rms, f = 20 Hz to 20 kHz
RL = 50 Ω, CL = 5 pF; see Figure 24
VS = 0 V, f = 1 MHz
VS = 0 V, f = 1 MHz
VS = 0 V, f = 1 MHz
VS = 0 V, f = 1 MHz
VS = 0 V, f = 1 MHz
VS = 0 V, f = 1 MHz
VDD = +16.5 V, VSS = −16.5 V
Digital inputs = 0 V or VDD
Digital inputs = 5 V
Digital inputs = 0 V, 5 V or VDD
GND = 0 V
ADG1201/ADG1202
SINGLE SUPPLY
VDD = 12 V ± 10%, VSS = 0 V, GND = 0 V, unless otherwise noted.
Table 2.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Flatness (RFLAT(ON))
LEAKAGE CURRENTS
Source Off Leakage, IS (Off )
Drain Off Leakage, ID (Off )
Channel On Leakage, ID, IS (On)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
25°C
B Version1
−40°C to
−40°C to
+85°C
+125°C
0 V to VDD
300
475
60
±0.006
±0.1
±0.006
±0.1
±0.04
±0.15
567
625
±0.6
±1
±0.6
±1
±0.6
±1
2.0
0.8
0.001
±0.1
Digital Input Capacitance, CIN
DYNAMIC CHARACTERISTICS2
tON
tOFF
Charge Injection
Off Isolation
−3 dB Bandwidth
CS (Off )
CD (Off )
CD, CS (On)
POWER REQUIREMENTS
IDD
3
190
250
120
155
0.8
80
295
340
190
210
2
nA typ
nA max
nA typ
nA max
nA typ
nA max
V min
V max
μA typ
μA max
pF typ
ns typ
ns max
ns typ
ns max
pC typ
dB typ
MHz typ
pF typ
pF max
pF typ
pF max
pF typ
pF max
0.001
μA typ
μA max
μA typ
μA max
V min/max
60
VDD
1
V
Ω typ
Ω max
Ω typ
520
2.7
3.3
3.1
3.6
5.3
6.3
1.0
IDD
Unit
95
+5/+16.5
Temperature range for B version is −40°C to +125°C.
Guaranteed by design, not subject to production test.
Rev. 0 | Page 4 of 16
Test Conditions/Comments
VDD = 10.8 V, VSS = 0 V
VS = 0 V to 10 V, IS = −1 mA; see Figure 20
VS = 3 V, 6 V, and 9 V, IS = −1 mA
VDD = 13.2 V, VSS = 0 V
VS = 1 V or 10 V, VD = 10 V or 1 V; see Figure 21
VS = 1 V or 10 V, VD = 10 V or 1 V; see Figure 21
VS = VD = 1 V or 10 V; see Figure 22
VIN = VINL or VINH
RL = 300 Ω, CL = 35 pF
VS = 8 V; see Figure 26
RL = 300 Ω, CL = 35 pF
VS = 8 V; see Figure 26
VS = 6 V, RS = 0 Ω, CL = 1 nF; see Figure 27
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 23
RL = 50 Ω, CL = 5 pF; see Figure 24
VS = 6 V, f = 1 MHz
VS = 6 V, f = 1 MHz
VS = 6 V, f = 1 MHz
VS = 6 V, f = 1 MHz
VS = 6 V, f = 1 MHz
VS = 6 V, f = 1 MHz
VDD = 13.2 V
Digital inputs = 0 V or VDD
Digital inputs = 5 V
VSS = 0 V, GND = 0 V
ADG1201/ADG1202
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs1
Digital Inputs1
Peak Current, S or D
Continuous Current per
Channel, S or D
Operating Temperature Range
Industrial (B Version)
Storage Temperature Range
Junction Temperature
6 Lead SOT-23
θJA,Thermal Impedance
θJC, Thermal Impedance
Reflow Soldering Peak
Temperature, Pb-free
1
Rating
35 V
−0.3 V to +25 V
+0.3 V to −25 V
VSS – 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
GND – 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
100 mA (pulsed at 1 ms, 10%
duty cycle maximum)
30 mA
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
−40°C to +125°C
−65°C to +150°C
150°C
229.6°C/W
91.99°C/W
260°C
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Rev. 0 | Page 5 of 16
ADG1201/ADG1202
VDD 1
GND 2
ADG1201/
ADG1202
6
IN
5
D
TOP VIEW
VSS 3 (Not to Scale) 4 S
06576-002
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 2. SOT-23 Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1
2
3
4
5
6
Mnemonic
VDD
GND
VSS
S
D
IN
Description
Most Positive Power Supply Potential.
Ground (0 V) Reference.
Most Negative Power Supply Potential.
Source Terminal. Can be an input or output.
Drain Terminal. Can be an input or output.
Logic Control Input.
Table 5. ADG1201/ADG1202 Truth Table
ADG1201 IN
1
0
ADG1202 IN
0
1
Switch Condition
On
Off
Rev. 0 | Page 6 of 16
ADG1201/ADG1202
TYPICAL PERFORMANCE CHARACTERISTICS
200
250
180
VDD = +13.5V
VSS = –13.5V
160
200
140
ON RESISTANCE (Ω)
120
100
VDD = +15V
VSS = –15V
80
VDD = +16.5V
VSS = –16.5V
60
40
TA = +125°C
150
TA = +85°C
100
TA = +25°C
TA = –40°C
06576-003
50
20
0
–18 –15 –12
–9 –6
–3
0
3
6
9
SOURCE OR DRAIN VOLTAGE (V)
12
15
0
–15
18
Figure 3. On Resistance as a Function of VD (VS) for Dual Supply
06576-006
ON RESISTANCE (Ω)
VDD = +15V
VSS = –15V
TA = +25ºC
–10
–5
0
5
SOURCE OR DRAIN VOLTAGE (V)
15
Figure 6. On Resistance as a Function of VD (VS) for Different
Temperatures, Dual Supply
450
600
TA = +25°C
VDD = +12V
VSS = 0V
400
TA = +125°C
500
350
TA = +85°C
VDD = +5.5V
VSS = –5.5V
300
ON RESISTANCE (Ω)
ON RESISTANCE (Ω)
10
250
200
150
400
300
200
TA = –40°C
100
TA = +25°C
50
0
–5
–4
–3
–2
–1
0
1
2
3
SOURCE OR DRAIN VOLTAGE (V)
4
0
5
Figure 4. On Resistance as a Function of VD (VS) for Dual Supply
2
4
6
8
SOURCE OR DRAIN VOLTAGE (V)
10
12
200
VDD = 12V
VSS = 0V
100
LEAKAGE CURRENT (pA)
VDD = 10.8V
VSS = 0V
350
300
250
VDD = 13.2V
VSS = 0V
200
150
100
06576-005
50
0
2
VDD = +15V
VSS = –15V
VBIAS = ±10V
150
400
4
6
8
10
SOURCE OR DRAIN VOLTAGE (V)
12
Figure 5. On Resistance as a Function of VD (VS) for Single Supply
Rev. 0 | Page 7 of 16
50
0
–50
–100
–150
–200
–250
–300
IS (OFF) + –
IS (OFF) – +
ID, IS (ON) + +
–350
–400
–450
0
20
ID (OFF) + –
ID (OFF) – +
ID, IS (ON) – –
40
60
80
TEMPERATURE (ºC)
06576-028
TA = 25°C
ON RESISTANCE (Ω)
0
Figure 7. On Resistance as a Function of VD (VS) for Different
Temperatures, Single Supply
450
0
06576-007
06576-004
100
100
120
Figure 8. Leakage Currents as a Function of Temperature, Dual Supply
ADG1201/ADG1202
0.5
150
VDD = +5V
VSS = –5V
VBIAS = ±4.5V
0.4
CHARGE INJECTION (pC)
0
–50
–100
–150
0
40
0.1
0
–0.2
80
60
TEMPERATURE (ºC)
100
–0.5
–15
120
0
5
10
15
300
200
250
150
15V DS tOFF
15V DS tON
12V SS t OFF
12V SS t ON
200
TIME (ns)
100
50
0
150
100
–50
–100
IS (OFF) + –
IS (OFF) – +
ID, IS (ON) + +
–150
0
50
ID (OFF) + –
ID (OFF) – +
ID, IS (ON) – –
20
40
06576-027
80
60
TEMPERATURE (ºC)
100
0
–40
120
–20
0
20
40
60
80
100
120
TEMPERATURE (ºC)
Figure 13. TON/TOFF Times vs. Temperature
Figure 10. Leakage Currents as a Function of Temperature, Single Supply
0
120
IDD PER CHANNEL
TA = 25ºC
–20
OFF ISOLATION (dB)
100
80
60
VDD = +15V
VSS = –15V
40
VDD = 12V
VSS = 0V
0
2
4
6
–40
–60
–80
–100
06576-021
20
VDD = 15V
VSS = –15V
TA = 25ºC
8
10
12
14
–120
10k
06576-016
LEAKAGE CURRENT (pA)
–5
Figure 12. Charge Injection vs. Source Voltage
VDD = 12V
VSS = 0V
VBIAS = 1/10V
250
IDD (µA)
–10
INPUT VOLTAGE (V)
300
0
VDD = +5V
VSS = –5V
–0.4
Figure 9. Leakage Currents as a Function of Temperature, Dual Supply
–200
VDD = 12V
VSS = 0V
–0.1
–0.3
ID (OFF) + –
ID (OFF) – +
ID, IS (ON) – –
20
0.2
06576-023
–250
VDD = +15V
VSS = –15V
06576-022
IS (OFF) + –
IS (OFF) – +
ID, IS (ON) + +
–200
TA = 25ºC
0.3
50
06576-026
LEAKAGE CURRENT (pA)
100
100k
1M
10M
100M
FREQUNCY (Hz)
LOGIC LEVEL, INx (V)
Figure 14. Off Isolation vs. Frequency
Figure 11. IDD vs. Logic Level
Rev. 0 | Page 8 of 16
1G
ADG1201/ADG1202
0
6
VDD = 15V
VSS = –15V
TA = 25ºC
5.5
SOURCE/DRAIN ON
5
–4
CAPACITANCE (pF)
–6
–8
–10
VDD = 12V
VSS = 0V
TA = 25ºC
4.5
4
3.5
DRAIN OFF
3
–14
10k
2.5
06576-0017
–12
100k
1M
10M
100M
2
1G
SOURCE OFF
0
2
4
06576-019
INSERTION LOSS (dE)
–2
6
8
12
10
INPUT VOLTAGE (V)
FREQUNCY (Hz)
Figure 15. On Response vs. Frequency
Figure 18. Capacitance vs. Input Voltage, Single Supply
10
0
LOAD = 10kΩ
TA = 25°C
–10
–20
VDD = +15V
VSS = –15V
Vp-p = 0.63V
TA = 25ºC
NO DECOUPLING CAPS ON
–30
THD + N (%)
1
ACPSRR (dB)
VDD = +5V, VSS = –5V, VS = +3.5V rms
VDD = +15V, VSS = –15V, VS = +5V rms
0.1
–40
–50
–60
DECOUPLING CAPS ON
–70
0.01
10
100
1k
FREQUENCY (Hz)
10k
100k
06576-025
06576-024
–80
–90
–100
100k
1M
10M
FREQUENCY (Hz)
Figure 19. ACPSRR vs. Frequency
Figure 16. THD + N vs. Frequency
6
VDD = 15V
VSS = –15V
TA = 25ºC
5.5
SOURCE/DRAIN ON
4.5
4
3.5
DRAIN OFF
3
2.5
06576-018
CAPACITANCE (pF)
5
SOURCE OFF
2
–15
–10
–5
0
5
10
15
INPUT VOLTAGE (V)
Figure 17. Capacitance vs. Input Voltage, Dual Supply
Rev. 0 | Page 9 of 16
100M
ADG1201/ADG1202
TEST CIRCUITS
VDD
VSS
0.1µF
0.1µF
VDD
NETWORK
ANALYZER
VSS
S
IDS
50Ω
50Ω
IN
VS
D
VIN
S
GND
D
06576-008
RON = V1/IDS
VS
RL
50Ω
VOUT
OFF ISOLATION = 20 LOG
Figure 20. On Resistance
VOUT
VS
06576-013
V1
Figure 23. Off Isolation
VDD
VSS
0.1µF
0.1µF
VDD
NETWORK
ANALYZER
VSS
S
50Ω
IN
VS
D
D
VIN
ID (OFF)
A
VS
RL
50Ω
GND
VD
INSERTION LOSS = 20 LOG
Figure 21. Off Leakage
VOUT
VOUT WITH SWITCH
VOUT WITHOUT SWITCH
06576-014
A
S
06576-009
IS (OFF)
Figure 24. Bandwidth
VDD
VSS
0.1µF
0.1µF
VDD
AUDIO PRECISION
VSS
RS
S
IN
ID (ON)
D
NC = NO CONNECT
A
VD
VIN
GND
Figure 22. On Leakage
RL
10kΩ
Figure 25. THD + Noise
Rev. 0 | Page 10 of 16
VOUT
06576-015
S
06576-010
NC
VS
V p-p
D
ADG1201/ADG1202
VDD
VSS
0.1µF
VDD
VSS
S
VS
VIN
ADG1201
50%
50%
VIN
ADG1202
50%
50%
VOUT
D
CL
35pF
RL
300Ω
IN
90%
VOUT
90%
GND
tOFF
tON
06576-011
0.1µF
Figure 26. Switching Times
VS
VSS
VDD
VSS
S
D
VIN
CL
1nF
IN
GND
ADG1201
ON
VOUT
VIN
OFF
ADG1202
VOUT
QINJ = CL × ΔVOUT
Figure 27. Charge Injection
Rev. 0 | Page 11 of 16
ΔVOUT
06576-012
RS
VDD
ADG1201/ADG1202
TERMINOLOGY
IDD
The positive supply current.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
ISS
The negative supply current.
CIN
The digital input capacitance.
VD (VS)
The analog voltage on Terminal D and Terminal S.
tON
The delay between applying the digital control input and the
output switching on. See Figure 26.
RON
The ohmic resistance between D and S.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
IS (Off)
The source leakage current with the switch off.
ID (Off)
The drain leakage current with the switch off.
tOFF
The delay between applying the digital control input and the
output switching off. See Figure 26.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
ID, IS (On)
The channel leakage current with the switch on.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
VINL
The maximum input voltage for Logic 0.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
VINH
The minimum input voltage for Logic 1.
On Response
The frequency response of the on switch.
IINL (IINH)
The input current of the digital input.
Insertion Loss
The loss due to the on resistance of the switch.
CS (Off)
The off switch source capacitance, measured with reference
to ground.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
CD (Off)
The off switch drain capacitance, measured with reference
to ground.
ACPSRR (AC Power Supply Rejection Ratio)
Measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of
signal on the output to the amplitude of the modulation is
the ACPSRR.
Rev. 0 | Page 12 of 16
ADG1201/ADG1202
OUTLINE DIMENSIONS
2.90 BSC
6
5
4
1
2
3
2.80 BSC
1.60 BSC
PIN 1
INDICATOR
0.95 BSC
1.30
1.15
0.90
1.90
BSC
1.45 MAX
0.15 MAX
0.50
0.30
0.22
0.08
SEATING
PLANE
10°
4°
0°
0.60
0.45
0.30
COMPLIANT TO JEDEC STANDARDS MO-178-AB
Figure 28. 6-Lead Small Outline Transistor Package [SOT-23]
(RJ-6)
Dimensions shown in millimeters
ORDERING GUIDE
Model
ADG1201BRJZ-R21
ADG1201BRJZ-REEL71
ADG1202BRJZ-R21
ADG1202BRJZ-REEL71
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
6-Lead Small Outline Transistor Package [SOT-23]
6-Lead Small Outline Transistor Package [SOT-23]
6-Lead Small Outline Transistor Package [SOT-23]
6-Lead Small Outline Transistor Package [SOT-23]
Z = RoHS Compliant Part.
Rev. 0 | Page 13 of 16
Package Option
RJ-6
RJ-6
RJ-6
RJ-6
Branding
S25
S25
S26
S26
ADG1201/ADG1202
NOTES
Rev. 0 | Page 14 of 16
ADG1201/ADG1202
NOTES
Rev. 0 | Page 15 of 16
ADG1201/ADG1202
NOTES
©2008 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06576-0-2/08(0)
Rev. 0 | Page 16 of 16