November 10, 2008 DR360 SERIES, HIGH CURRENT, HIGH TEMPERATURE INDUCTORS Features z z z z z Low EMI High Current Capacity Operating Temp. -55°C to +200°C Horizontal or Vertical mount (Note 5) Tinned Leads with Leaded Solder is Available (note 7) NOTES Part Number L(µH) ±15% (1) DR360-X-122 DR360-X-182 DR360-X-272 DR360-X-392 DR360-X-472 DR360-X-562 DR360-X-682 DR360-X-822 DR360-X-103 DR360-X-123 DR360-X-153 DR360-X-183 DR360-X-223 DR360-X-273 DR360-X-333 DR360-X-393 DR360-X-473 DR360-X-563 DR360-X-683 DR360-X-823 DR360-X-104 DR360-X-124 DR360-X-154 DR360-X-184 DR360-X-224 DR360-X-274 DR360-X-334 DR360-X-394 DR360-X-474 DR360-X-564 DR360-X-684 DR360-X-824 DR360-X-105 1.2 1.8 2.7 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 L(µH)±15% @ I rated (2) 1.0 1.5 2.2 3.1 3.7 4.3 5.1 6.0 7.2 8.5 10.3 12.2 14.5 19.2 23.0 26.7 34.7 40.8 48.5 57.4 68.3 80.5 97.9 114.5 136.6 163.2 218.3 252.8 297.9 389.1 461.4 545.2 648.2 Idc (A) 38.7 34.6 31.6 29.2 27.3 25.8 24.5 24.3 23.3 22.4 20.8 20.2 19.0 14.3 13.6 13.0 10.0 9.7 9.2 8.8 8.3 8.0 7.5 7.2 6.8 6.5 4.9 4.7 4.5 3.4 3.2 3.1 2.9 (1) OCL measured at .25VRMS, 1kHz. DCR (Ω) (MAX) Dim. A Nom. Dim. B Nom. Dim. C Nom. 0.002 0.003 0.003 0.004 0.004 0.005 0.005 0.005 0.006 0.006 0.007 0.007 0.008 0.014 0.015 0.017 0.028 0.030 0.034 0.037 0.041 0.045 0.050 0.055 0.061 0.067 0.10 0.13 0.14 0.24 0.27 0.30 0.33 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.53 0.53 0.53 0.52 0.52 0.52 0.52 0.56 0.56 0.56 0.56 0.56 0.56 0.54 0.54 0.54 0.53 0.53 0.53 0.58 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.14 1.14 1.14 1.13 1.13 1.13 1.13 1.17 1.17 1.17 1.17 1.17 1.17 1.16 1.16 1.16 1.14 1.14 1.14 1.17 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.066 0.053 0.053 0.053 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.042 0.037 0.037 0.037 0.027 0.027 0.027 0.027 (2) Rated Current tested at .25VRMS, 1kHz (3) All materials are rated at 200ºC (4) Electrical Specifications at 25°C (5) DR360-2-XXX denotes vertical design. DR360-1-XXX denotes horizontal design (6) All dimensions are shown in inches “in”. General tolerance is ±0.010in, unless otherwise specified. (7) For non-RoHS parts replace DR prefix with 42- (e.g. DR360 becomes 42-360) (8) Terminal finish is compliant to RoHS requirements. u .50 .02 1 1.280 MAX u B C 0.65 MAX .50 .02 C Vertical DR360-2-XXX DATATRONIC: A 2 1.28 MAX 0.65 MAX Schematic Horizontal DR360-1-XXX 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.