Series MS11-CMX 3 -10 Amp • 0-200 Vdc • DC Output DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a DIN Rail (TS-35) mount air-cooled package. • DIN Rail Mount (TS 35) • MOSFET Output et e • Extra Low On State Resistance • Input Status LED MODEL NO. MS11-CMX60D5 INPUT SPECIFICATIONS 1 MS11-CMX60D10 MS11-CMX100D6 MS11-CMX200D3 5-10 Vdc 5-10 Vdc 5-10 Vdc 6-10 Vdc Nominal Input Impedance 300 Ohm 300 Ohm 300 Ohm 300 Ohm 12 mA 12 mA 12 mA 12 mA 5 Vdc 5 Vdc 5 Vdc 6 Vdc 1.0 Vdc 1.0 Vdc 1.0 Vdc 1.0 Vdc 0-60 Vdc 0-60 Vdc 0-100 Vdc 0-200 Vdc 0-5 Adc 0-10 Adc 0-6 Adc 0-3 Adc Max. Surge Current, (10 msec) 60 Apk 100 Apk 100 Apk 30 Apk Max.Off-State Leakage @ Rated Voltage 100 µAdc 100 µAdc 4 100 µAdc 100 µAdc Max. On-State Resistance @ Rated Current (R DS-ON) .10 Ohm .018 Ohm .040 Ohm .20 Ohm 0.5V 0.18V 0.24V 0.6V Max.Turn-On Time @ 10Vdc Control 1.0 msec 1.0 msec 1.0 msec 1.0 msec Max. Turn-Off TIme @ 10Vdc Control 300 µsec 300 µsec 300 µsec 300 µsec Typical Input Current @ 5 Vdc Must Turn On Voltage Must Turn Off Voltage ol Control Voltage Range OUTPUT SPECIFICATIONS 1 3 Operating Voltage Range bs Load Current Range O Max. On-State Voltage Drop @ Rated Current © 2007 CRYDOM Inc., Specifications subject to change without notice. GENERAL NOTES 1 All parameters at 25ºC unless otherwise specified. 2 Dielectric and insulation resistance are measured between input and output. 3 Inductive loads should be diode suppressed. 4 At 55 Vdc. SERIES MS11-CMX. Rev. 110707 PAGE 1 OF 3 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Holyrood Close, Poole, Dorset BH17 7FJ, Email: [email protected]. GERMANY: +49 (0)180 3000 506 Series MS11-CMX 3 -10 Amp • 0-200 Vdc • DC Output GENERAL SPECIFICATIONS Dielectric Strength 2 2500 Vrms 10 9 Ohm Insulation Resistance (Min.) @ 500 Vdc 2 Max. Capacitance (Input/Output) 15 pF -30 to 80°C Ambient Storage Temperature Range -30 to 125°C et e Ambient Operating Temperature Range MECHANICAL SPECIFICATIONS Weight: (typical) 30 g Encapsulation(SSR): CURRENT DERATING CURVES CMX100D6 5.0 CRYDOM Solid State Relay 3.0 2.0 Input 1.0 0 20 -A2 +A1 CMX Series CMX200D3 40 60 80 bs AMBIENT TEMPERATURE [ °C ] Output 29.0 4.0 CMX60D5 54.0 LOAD CURRENT [AMPS] 6.0 ol 7.0 Thermally Conductive Epoxy LOAD CURRENT [AMPS] 12.0 10.0 8.0 CMX60D10 DIN Rail TS35 85.0 12.5 6.0 4.0 All dimensions are in millimeters (not to scale) Colour of carrier including terminations - orange 2.0 0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] O Max. Load Current vs. Temp. © 2007 CRYDOM Inc., Specifications subject to change without notice. APPROVALS (SSR ONLY) UL E116950 (3A, 6A & 10A Models) SERIES MS11-CMX. Rev. 110707 PAGE 2 OF 3 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Holyrood Close, Poole, Dorset BH17 7FJ, Email: [email protected]. GERMANY: +49 (0)180 3000 506 Series MS11-CX 5 Amp• 240 Vac• AC Output Crydom's family of SPST-NO relays achieves the highest power switching capability in a DIN mounted air-cooled package. Advanced features include exceptional steady state current, plus ultra-high surge ratings. Models are available to switch up to 280 Vrms with AC or DC control, and either zero-cross or random turn-on ("R") switching versions. • DIN Rail Mount (TS-35) • SCR Output Rating • Ultra High Surge • Crydom’s Patented Design MODEL NUMBERS et e • Input Status LED AC CONTROL (120Vac) (24Vac) MS11-CX2405A MS11-CXE240A5 DC CONTROL MS11-CX240D5 MS11-CXE240D5 OUTPUT SPECIFICATIONS 1 Operating Voltage (47-63 Hz) [Vrms] (5Vdc) (24Vdc) 12-280 Load Current Range [Arms] .06-5 600 Transient Overvoltage [Vpk] 250 Max. Surge Current, (16.6ms) [Apk] 1.4 ol Max. On-State Voltage Drop @ Rated Current [Vpk] Maximum I 2 t for Fusing, (8.3 msec.) [A 2 sec] 260 Max. Off-State Leakage Current @ Rated Voltage [mArms] 0.1 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] 2 500 Max. Turn-On Time 3 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec (AC Control) 0.5 bs Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS 1 DC CONTROL 24Vdc 5Vdc Nominal Voltage MODEL NUMBERS MS11-CX240D5 MS11-CXE240D5 AC CONTROL 4 24Vac 120Vac MS11-CX240A5 MS11-CXE240A5 Control Voltage Range 4-5 Vdc 15-32 Vdc 90-140 Vrms 18-36 Vrms Max. Turn-On Voltage 3.0 Vdc 15.0 Vdc 90.0 Vrms 18.0 Vrms Min. Turn-Off Voltage 1.0 Vdc 1.0 Vdc 10.0 Vrms 2.0 Vrms Nominal Input Impedance 300 Ohm 1.0k Ohm 14.1k Ohm 4.2k Ohm 12 mA 8 mA 10 mArms 5 mArms O Typical Input Current @ Nominal Voltage GENERAL NOTES © 2005 CRYDOM CORP, Specifications subject to change without notice. 1 All parameters at 25ºC unless otherwise specified. 2 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3 Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). 4 No input status LED on AC control modules. SERIES MS11-CX. Rev. 012505 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 •Tech Support (877) 702-7700 • FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] • WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506 Series MS11-CX 5Amp • 240 Vac • AC Output GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base 2500 Vrms 10 9 Ohm Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output 10 pF -30 to 80ºC et e Ambient Operating Temperature Range Ambient Storage Temperature Range -30 to 80ºC MECHANICAL SPECIFICATION Weight: (typical) 30 grms Encapsulation (SSR): CURRENT DERATING CURVE CRYDOM Solid State Relay 5.0 -A2 +A1 CX Series 4.0 Output ol Input 3.0 2.0 1.0 0 20 40 60 80 29.0 54.0 LOAD CURRENT [AMPS] 6.0 Thermally Conductive Epoxy DIN Rail TS35 AMBIENT TEMPERATURE [ C] 85.0 bs Max. Load Current vs. Temp. 12.5 All dimensions are in millimeters (not to scale) Colour of carrier and termination housing - orange Input status LED is on DC control module only © 2005 CRYDOM CORP, Specifications subject to change without notice. AVAILABLE OPTIONS Random Turn-On Switching Example: MS11-CX240D5R, MS11-CX240A5R O R APPROVALS ( SSR ONLY ) UL E 116949 CSA LR 81689 VDE 70938 UG (240V, DC Control Only) SERIES MS11-CX Rev. 012405 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 •Tech Support (877) 702-7700 • FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] • WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506 DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / PERIGO • Verify all connections and replace all covers before turning on power. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo. • Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION • Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION. • Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSI ONE. • Spenga tutta l'alimentazion e che fornisce questa apparecchiatu ra prima del lavorare a questa apparecchiatu ra RISCO DE DESCARGA ELÉTTRICA OU EXPLOSÃO • Desconectar o equipamento de toda á energia antes de instalar ou trabalhar com este equipamen to • Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. • Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. • Verificare tutti i collegamenti e sostituire tutte le coperture prima della rotazione sull'alimentazi one Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. L'omissione di seguire queste istruz ioni provocherà la morte o di lesioni serie • Verificar todas as conexões e recolocar todas as tampas antes de religar o equipamento O não cumprimento destas instruções pode levar á morte ou lesões sérias. ol Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. et e HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / AVISO RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG • The product's side panels may be hot, allow time for product to cool before touching. • Follow proper mounting instructions including torque values. • Do not allow liquids or foreign objects to enter this product. • Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher. • Respecter les consignes de montage, et notamment les couples de serrage. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. • Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren. • Beachten Sie die Montageanweisungen, • Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Failure to follow this instruction can result in serious injury, or equipment damage. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO RISCO DE DANO MATERIAL E DE AQUECIMENTO • Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en particular los pares de apretado. • No dejar que penetren líquidos o cuerpos extraños en el producto. • I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. • Seguire le istruzioni di montaggio corrette. • Non far entrare liquidi o oggetti estranei in questo apparecchio. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. O bs RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE SERIES MS11-CMX. Rev. 110707 PAGE 3 OF 3 • Os painéis laterais do produto podem estar quentes; dê tempo ao produto para arrefecer antes de lhe tocar. • Siga devidamente as instruções de montagem. • Não permita a entrada de líquidos e de objectos estranhos no produto. A não observância destas precauções pode provocar a morte, ferimentos graves ou danos materiais. ANNEX – ENVIRONMENTAL INFORMATION: Solder X et e The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor X O O O O O die O O O O O ℸ䰘ӊ᠔ᷛ⼎ⱘࣙᣀ⬉ᄤֵᙃѻક∵ᶧᷛⱘ⦃ֱֵᙃ ヺড়ЁढҎ⇥݅⬉ᄤ㸠Ϯᷛ ޚSJ/T11364 - 2006, ⬉ᄤֵᙃѻક∵ᶧࠊᷛ䆚㽕∖ ᳝↦᳝ᆇ⠽䋼ܗ㋴ 䪙 ∲ 䬝 ݁Ӌ䫀 ⒈㘨㣃 ⒈Ѡ㣃䝮 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) bs 䚼ӊ ৡ⿄ ol 䰘ӊ - ⦃ֱֵᙃ: ञᇐԧ㢃⠛ O ⛞⚍ X O O O X O O O O O O O © 2007 CRYDOM Inc., Specifications subject to change without notice.