NCL-CL1-01 LED Strip Module ■ ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ■ . , , . , , . . . . SPECIFICATION Model Product specifications Color Luminous angle LED Package LEDs Luminous flux Wavelength or Color temperature Rated working voltage Rated input power Working temperature IP level Packing NCL-CL1-01 3000×10×4mm Standard white 120 O 5050(one color) 30LED/M 320lm/M 5500-6500K DC12V 5.4W/M -20℃~ +45℃ IP 54 0.11Kg,50pcs/10Kg/44x40x26cm File Name:NCL-CL1-01 2015-11-23 NCL-CL1-01 LED Strip Module ■ Mechanical Specification Remarks: ⑴Above all dimensions of the unit is mm; ⑵Without special mark, the normal size error is:Size≥5mm error±0.5mm, Size<5mm error ±0.05mm ■ The Circuit Principle Diagram ■ Connection AC220V/110V + Strip DC1 - Driver DC1 2V 2V + Strip DC1 - 2V Receiver Remote File Name:NCL-CL1-01 2015-11-23 LED Strip Module NCL-CL1-01 ■ Cautions ‧ In order to guarantee that the LED life and the use environment, cannot make any force when the product lighting use to pull the power cables, forbids to collide, in order to avoid damages LED. ‧ For can better lighting effect of the product, each 5 meter long strip must connect the main power source. ‧ Must guarantee that each power source (GND) must connect. ‧ Should not be curving in the diameter 60mm following radian, please do not rebate, in order to avoid damage lamp bead or break. ‧ Please follow the user manual for installation. ■ Waring ‧ Please note the careful operation, in the power source connection's situation, will touch the alternating current ‧ ‧ ‧ supply end possibly to cause your safety. In the actual application, the power source should retain 20% remainders, guaranteed that the sufficiency the voltage lightens LED. Installs as far as possible the product in the appropriate environment. Pays attention to the power cable in the installment process positive and negative extremely, please do not wrong, power source and product voltage to be whether correct, in order to avoid creates the product the damage. File Name:NCL-CL1-01 2015-11-23