AB102S-A THRU AB110S-A Single Phase 0.8AMP Surface Mount Glass Passivated Bridge Rectifiers ■ Outline ■ Features • Glass passivated die construction. • Low forward voltage drop. • High current capability. • High surge current capability. • Design for surface mount application. • Plastic material-UL flammability 94V-0. • Suffix “G” indicates Halogen free parts, ex AB102SG-A - + Marking code ■ Mechanical data • Case : SOPA-4,Molded plastic, ABS • Terminals :plated leads solderable per MIL-STD-202, Method 208 • Polarity : as marked on case • Mounting position: Any • Marking: type number ■ Maximum ratings and electrical characteristics Rating at 25 O C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Conditions Symbol MIN. TYP. O Average rectified output current T A = 30 C (Note:1) IO T A = 30 O C (Note:2) 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Non-Repetitive Peak Forward surge current Peak Reverse current at rated DC blocking voltage IFSM T A = 125 C 0.5 A 30 A 5 IR O UNIT 0.8 O T A = 25 C MAX. uA 500 Typical Thermal resistance per leg (Note:3) RθJA 62.5 RθJL 25 Storage temperature TSTG -55 to +150 O C TJ -55 to +150 O C Operating Junction temperature Max. Max. Max. DC repetitive peak Working peak blocking voltage reverse voltage reverse voltage V D C (V) V R R M (V) V RW M (V) Max. RMS voltage V R M S (V) Symbol Marking code AB102S-A ABS2 200 200 200 140 AB104S-A ABS4 400 400 400 280 AB106S-A ABS6 600 600 600 420 AB108S-A ABS8 800 800 800 560 AB110S-A ABS10 1000 1000 1000 700 O C/W forward voltage per element @IF=0.5A V F M (V) 0.95 Note: 1.Mounted on glass epoxy PC board with 1.3mm 2 solder pad. 2.Mountaed on aluminum substrate PC board with 1.3mm 2 solder pad. 3.Measured at 1.0MHz and applied reverse voltage of 4.0V D.C. 1 Document ID : DS-22B42 Revised Date : 2017/06/23 Revision : C2 AB102S-A THRU AB110S-A Single Phase 0.8AMP Surface Mount Glass Passivated Bridge Rectifiers ■ Rating and characteristic curves Fig. 1 Maximum Forward Current Derating Curve Average Forward Current(A) Instantaneous Forward Current(A) Fig. 2 Typical Forward Characteristics Ambient Temperature ( O C) Forward Voltage (V) Fig. 4 Typical Reverse Characteristics Peak Forward Surge Current(A) Instantaneous Reverse Current(uA) Fig. 3 Maximum Non-Repetitive Forward Surge Current Number of Cycle at 60Hz O T A =125 C O T A =75 C O T A =25 C Percent of Rated Peak Reverse Voltage(%) 2 Document ID : DS-22B42 Revised Date : 2017/06/23 Revision : C2 AB102S-A THRU AB110S-A Single Phase 0.8AMP Surface Mount Glass Passivated Bridge Rectifiers ■ Marking Information Part number - + Halogen Marking code Halogen free Marking Code AB102S-A ABS2 AB104S-A ABS4 AB106S-A ABS6 AB108S-A ABS8 AB110S-A ABS10 AB102SG-A ABS2H AB104SG-A ABS4H AB106SG-A ABS6H AB108SG-A ABS8H AB110SG-A ABS10H ■ Ordering/Packing information Part number Case Q'TY/Reel (PCS) Q'TY/Box (PCS) Q'TY/Carton (PCS) AB102S-A Halogen 4,000 ABS Halogen free 8,000 40,000 AB102SG-A Notes： 1. For packaging details please reference our website at http://www.citcorp.com.tw/tchinese/products/index.php ■ ABS foot print E D B C A A B C D 0.035 (0.90) 0.059 (1.50) 0.125 (3.20) 0.225 (5.72) E 0.161 (4.10) Dimensions in inches and (millimeters) 3 Document ID : DS-22B42 Revised Date : 2017/06/23 Revision : C2 AB102S-A THRU AB110S-A Single Phase 0.8AMP Surface Mount Glass Passivated Bridge Rectifiers ■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice. ■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. ■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. ■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. ■ No license is granted by implication or otherwise under any intellectual property rights of CITC. ■ CITC products are not authorized for use as critical components in life support devices or systems without express written approval of CITC. http://www.citcorp.com.tw/ Tel:886-3-5600628 Fax:886-3-5600636 Add:Rm. 3, 2F., No.32, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) 4 Document ID : DS-22B42 Revised Date : 2017/06/23 Revision : C2