HIGH VOLTAGE POWER SUPPLY C11152 SERIES The C11152 series is a compact PC-board mountable high voltage power supply module, especially designed for photomultiplier tubes. The C11152 and C11152-01 output negative polarity and the C11152-50 and C11152-51 output positive polarity high voltage. FEATURES ● Low ripple / noise ● Compact and lightweight ● High stability ● High voltage monitor output ● Various protective and fail-safe functions SPECIFICATIONS Parameter Input voltage C11152 +15 ± 1 45 180 C11152-01 +12 ± 0.5 50 220 0 to -1500 -240 to -1500 C11152-50 C11152-51 +15 ± 1 +12 ± 0.5 45 50 180 220 0 to +1500 +240 to +1500 with no load Typ. with full load Typ. Variable output voltage range Specification guaranteed output voltage range Max. Output current 1 Line regulation against ±1 V or ±0.5 V Typ. ±0.01 input change AB Load regulation against 0 % to 100 % Typ. ±0.01 load change A Typ. Ripple / noise (p-p) AB 5 (>5 kHz), 8 (< =5 kHz) Output voltage control By external controlling voltage (0 V to +5 V) or external potentiometer (50 kΩ) Controlling voltage input impedance Typ. 130 150 Typ. Reference voltage output +5.2 Output voltage setting (absolute value) Typ. Controlling voltage × 300 Output voltage rise time (0 % ➝ 99 %) AB Typ. 120 Typ. Temperature coefficient AB ±0.005 High voltage monitor output 0 to +5 (Output impedance 10 kΩ) ON / OFF input TTL positive logic ON / OFF input inpedance 30 Operating ambient temperature AB 0 to +50 Operating ambient humidity C Below 80 Storage temperature -20 to +60 Storage humidity C Below 80 Weight 38 Units protected against reversed power input, reversed / excessive controlling Protective functions voltage input, continuous overloading / short circuit in output Input current A AAt maximum output voltage. BAt maximum output current. Unit V mA V V mA % % mV — kΩ V V ms % / °C V — kΩ °C % °C % g — CNo condensation Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K. HIGH VOLTAGE POWER SUPPLY C11152 Figure 1: Connection diagrams ●OUTPUT VOLTAGE CONTROLLING BY EXTERNAL VOLTAGE ●OUTPUT VOLTAGE CONTROLLING BY EXTERNAL POTENTIOMETER LOAD LOAD 8 9 130 kΩ: C11152, C11152-01 150 kΩ: C11152-50, C11152-51 10 kΩ 3 4 5 0 V to +5 V* 6 10 kΩ 7 1 V MAX. +15 V or +12 V TTL logic High: HV-ON TTL logic Low : HV-OFF 2 3 50 kΩ 4 5 6 7 V MIN. +15 V or +12 V TTL logic High: HV-ON TTL logic Low : HV-OFF * The instability in the external controlling voltage should be minimized as it directly affects the output voltage quality. ** Never connect the pin number 3 and 5 directly and externally. Figure 2: Output voltage controlling characteristics Figure 3: Overload characteristics (C11152, C11152-01) (C11152, C11152-01) TACCB0113EA -1800 -1500 +1500 -1500 -1200 +1200 -900 +900 -600 +600 0 1 2 3 4 5 5.3 6 (C11152-50, C11152-51) TACCB0138EA -1200 +1800 OUTPUT VOLTAGE: 100 % +1500 OUTPUT VOLTAGE: 75 % +1200 +900 -900 OUTPUT VOLTAGE: 50 % -600 +600 OUTPUT VOLTAGE: 25 % +300 -300 +300 -300 0 OUTPUT VOLTAGE (V) +1800 OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) -1800 (C11152-50, C11152-51) TACCC0146EB 0 10-5 0 CONTROLLING VOLTAGE (V) OUTPUT VOLTAGE (V) 1 2 DON'T USE PIN ASSIGNMENT 1 Vref +5.2 V Typ. 2 Vcont 3 Vcont GND** 4 ON / OFF IN 5 GND** 6 Vcc +15 V or +12 V 7 HV MONITOR OUT 8 HV OUT 9 HV GND 8 9 130 kΩ: C11152, C11152-01 150 kΩ: C11152-50, C11152-51 10-4 10-3 0 10-2 OUTPUT CURRENT (A) Figure 4: Dimensional outline (Unit: mm) 2.54 × 6 METAL HOUSING* 2.54 10 5±1 16.51 9 8 13.97 41.0 ± 0.5 9× 0.64 1 2 3 4 5 6 7 7.62 10.16 41.0 ± 0.5 HAMAMATSU PHOTONICS K.K. PIN ASSIGNMENT 1 Vref +5.2 V Typ. 2 Vcont 3 Vcont GND** 4 ON / OFF IN 5 GND** 6 Vcc +15 V or +12 V 7 HV MONITOR OUT 8 HV OUT 9 HV GND * The metal housing is internally connected to the GND. ** Never connect the pin number 3 and 5 directly and externally. TACCA0306EC www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] TACC1053E02 China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] OCT. 2015. IP