October 18, 2011 DR217-2 SERIES RADIAL LEADED INDUCTORS Features Designed for EMI Filters & Switching Power Supplies Inductance Range from 3.3µH to 150mH Operating Temp. -20°C to +80°C Dielectric Withstand Capability 400VAC Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATIONS AT 25ºC Part Number Inductance (µH) @1kHz ±20% Q Min. Q Test Freq. DCR (Ohm) Max. Rated DC Current (A) Max. DR217-2-332 DR217-2-472 DR217-2-682 DR217-2-103 DR217-2-153 DR217-2-223 DR217-2-333 DR217-2-473 DR217-2-683 DR217-2-104 DR217-2-154 DR217-2-224 DR217-2-334 DR217-2-474 DR217-2-684 DR217-2-105 DR217-2-125 DR217-2-155 DR217-2-185 DR217-2-225 DR217-2-275 DR217-2-335 DR217-2-395 DR217-2-475 DR217-2-565 DR217-2-685 DR217-2-825 DR217-2-106 DR217-2-126 DR217-2-156 DR217-2-186 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 20 20 20 30 30 30 30 30 30 20 20 20 20 20 20 100 70 70 70 70 70 70 70 70 70 70 70 70 50 50 50 7.96MHz 7.96MHz 7.96MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 2.52MHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 79.6kHz 79.6kHz 79.6kHz 79.6kHz 0.016 0.020 0.022 0.039 0.045 0.062 0.10 0.15 0.22 0.35 0.43 0.90 1.50 1.80 2.50 3.20 3.50 4.50 5.00 6.80 7.20 10.50 11.70 13.60 16.60 19.60 25.20 29.50 33.80 45.40 50.40 3.50 3.00 2.50 2.00 1.70 1.40 1.10 0.95 0.80 0.65 0.54 0.44 0.36 0.30 0.25 0.20 0.18 0.17 0.155 0.14 0.125 0.115 0.105 0.095 0.085 0.080 0.070 0.065 0.060 0.055 0.050 DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 1 of 2 October 18, 2011 DR217-2 SERIES RADIAL LEADED INDUCTORS Part Number Inductance (uH) @1kHz Q Min. Q Test Freq. DCR (Ohm) Max. Rated DC Current (A) Max. DR217-2-226 DR217-2-306 DR217-2-336 DR217-2-396 DR217-2-476 DR217-2-506 DR217-2-566 DR217-2-686 DR217-2-826 DR217-2-107 DR217-2-127 DR217-2-157 22000 30000 33000 39000 47000 50000 56000 68000 82000 100000 120000 150000 50 50 50 50 50 50 50 50 50 30 30 30 79.6kHz 79.6kHz 79.6kHz 79.6kHz 79.6kHz 79.6kHz 79.6kHz 79.6kHz 79.6kHz 25.2kHz 25.2kHz 25.2kHz 60 91.5 98.5 140 160 170 250 282 312 380 430 520 0.045 0.040 0.035 0.032 0.030 0.029 0.028 0.025 0.023 0.020 0.018 0.016 MECHANICAL SPECIFICATIONS .098 ±.020 2,50 ±0,50 XXX .039 MIN. 1,00 1 .433 MAX. 11,00 .590 MIN. 15,00 Ø .275 MAX. 7,00 1 2 2 Ø .025 TYP 0,65 SCHEMATIC NOTES: 1. Dimensions are shown in inches/millimeters 2. Unless otherwise specified, tolerance = Inches: ±0.012 = Millimeters: ±0,30 3. IDC MAX based on the inductance being 90% of its initial value 4. For non-RoHS parts replace DR prefix with 42- (e.g. DR217-2 becomes 42-217-2) 5. Terminal finish is compliant to RoHS requirements DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 2 of 2