<SMALL-SIGNAL TRANSISTOR> PRELIMINARY INA6001AP1 Notice：This is not a final specification Some parametric are subject to change. FOR LOW FREQUENCY AMPLIFY APPLICATION SILICON PNP EPITAXIAL TYPE DESCRIPTION OUTLINE DRAWING UNIT：ｍｍ INA6001AP1 is a silicon PNP transistor. 4.6 MAX 1.6 It is designed with high voltage. 1.5 FEATURE C E Ic=-1A 0.8 MIN ・High collector current ・Low voltage VCE(sat) = -0.5V(MAX) B 2.5 ・High voltage VCEO = -100V 4.2 MAX ・Small package for easy mounting. 0.53 MAX 1.5 APPLICATION 0.4 0.48 MAX 3.0 Relay drive, Power supply マーキング MARKING TERMINAL CONNECTOR 電極接続 E：EMITTER Ｅ: エミッタ JEITA:SC-62 EIAJ : SC-62 JEDEC:SOT-89 JEDEC : Ｃ: コレクタ C：COLLECTOR Ｂ: ベース B：BASE JEDEC：― MAXIMUM RATING（Ta=25℃） SYMBOL PARAMETER RATING UNIT -120 V -6 V -100 V VCBO Collector to Base voltage VEBO Emitter to Base voltage VCEO Collector to Emitter voltage I Collector current -1 A PC Collector dissipation(Ta=25℃) 500 mW Tj Junction temperature ＋150 ℃ Tstg Storage temperature -55～＋150 ℃ C MARKING Type Name B G W LOT № hFE ITEM ELECTRICAL CHARACTERISTICS（Ta=25℃） SYMBOL PARAMETER TEST CONDITIONS MIN LIMITS TYP MAX UNIT V(BR)CBO C to B break down voltage I C=-100μA，I E=0mA -120 - - V V(BR)EBO E to B break down voltage I E=-100μA，I C=0mA -6 - - V V(BR)CEO C to E break down voltage I C=-10mA，RBE=∞ -100 - - V ICBO Collector cut off current VCB=-120V，I E =0mA - - -500 nA IEBO Emitter cut off current VEB=-6V，I C=0mA - - -500 nA ｈＦＥ1 DC forward current gain1 VCE=-2V，I C=-150mA 140 - 330 - ｈＦＥ2 DC forward current gain2 VCE=-5V，I C=-1A 40 - - - VCE(sat) C to E saturation voltage I C=-500mA，I B=-50mA - - -0.5 V VBE(sat) B to E saturation voltage I C=-500mA，I B=-50mA fT Gain bandwidth product VCE=-5V，I E=50mA Cob Collector output capacitance VCB=-10V，I E=0mA，f=1MHz ISAHAYA ELECTRONICS CORPORATION - - -1.1 V 100 - - MHz - - 10 pF 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan Keep safety first in your circuit designs! ·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunction or mishap. Notes regarding these materials ·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or third party. ·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. ·All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein. ·ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes , such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ·The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. ·If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. ·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Mar.2013