Click on Series name for product info on aimtec.com Series AM3D-Z 3 Watt | DC-DC Converter FEATURES: 7 Pin SIP Package High Efficiency up to 90% Low Profile Plastic Package RoHS Compliant Operating Temperature -40oC to +85oC Short Circuit Protection Input / Output Isolation 1000, 3000 VDC Pin Compatible With Multiple Manufacturers Models Single output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM3D-0505SZ AM3D-0509SZ AM3D-0512SZ AM3D-0515SZ AM3D-1205SZ AM3D-1209SZ AM3D-1212SZ AM3D-1215SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 600 333 250 200 600 333 250 200 1000 1000 1000 1000 1000 1000 1000 1000 769 714 714 714 298 287 284 278 80 70 80 80 25 25 25 20 80 81 82 84 84 86 89 90 AM3D-0505SH30Z AM3D-0509SH30Z AM3D-0512SH30Z AM3D-0515SH30Z AM3D-1205SH30Z AM3D-1209SH30Z AM3D-1212SH30Z AM3D-1215SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 600 333 250 200 600 333 250 200 3000 3000 3000 3000 3000 3000 3000 3000 769 714 714 714 298 287 284 278 80 70 80 80 25 25 25 20 80 81 82 84 84 86 89 90 Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM3D-0505DZ AM3D-0509DZ AM3D-0512DZ AM3D-0515DZ AM3D-1205DZ AM3D-1209DZ AM3D-1212DZ AM3D-1215DZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 1000 1000 1000 1000 1000 1000 1000 1000 741 706 706 714 294 284 281 278 80 70 70 80 25 25 25 20 82 83 84 86 85 86 89 90 AM3D-0505DH30Z AM3D-0509DH30Z AM3D-0512DH30Z AM3D-0515DH30Z AM3D-1205DH30Z AM3D-1209DH30Z AM3D-1212DH30Z AM3D-1215DH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 3000 3000 3000 3000 3000 3000 3000 3000 741 706 706 714 294 284 281 278 80 70 70 80 25 25 25 20 82 83 84 86 85 86 89 90 Model Input Current Full | No Load (mA) Efficiency (%) Models Dual output Model Input Current Full | No Load (mA) Efficiency (%) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Input Specifications Parameters Voltage Range Nominal Typical 5 12 Filter Start Up Time Absolute Maximum Rating Maximum Units 4.5-5.5 10.8-13.2 Capacitor VDC ms 5 12 9 15 Peak Input Voltage Time Input Reflected Ripple Current VDC 100 ms mA p-p Rated Units 25 Isolation Specifications Parameters Tested I/O Voltage Resistance Capacitance Conditions Typical 60 sec 1000, 3000 >1000 60 VDC MOhm pF Output Specifications Parameters Voltage Accuracy Line Voltage Regulation Load Voltage Regulation Temperature Coefficient Short Circuit Protection Ripple & Noise Minimum Load Current Conditions Typical Maximum ±3 ±1.2 ±8 ±0.02 Momentary (1sec) 50 10 For 1.0% of Vin load 10~100% 20MHz Bandwidth Units % % of Vin % %/oC mV p-p % of Max General Specifications Parameters Switching Frequency Operating Temperature Storage Temperature Maximum Case Temperature Derating Cooling Humidity Case Material Weight Dimensions (L x W x H) MTBF Maximum Soldering Temperature Conditions Typical 100% load With Derating Above 71 oC (5V input models only) 70 Maximum Units KHz oC -40 to +85 oC -40 to +125 oC 100 %/ oC Free Air Convection 95 Non-conductive black plastic UL 94 V-0 2.8 0.76 x 0.28 x 0.37 inches 19.50 x 7.20 x 9.50 mm >1 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5mm from case for 10 sec 260 % RH g oC Safety Specifications Parameters Agency Approval Standards www.aimtec.com F 051e R12.D CE EN55022: 2006 + A1: 2007, Class B EN55024: 1998 + A1: 2001 + A2:2003 IEC61000-4-2:2008 IEC61000-4-3: 2006 + A1: 2007 IEC61000-4-4, 2004 IEC61000-4-6: 2008 IEC61000-4-8: 1993 + A1:2000 Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 4 5 6 7 1000Vdc Single Dual + V Input + V Input - V Input - V Input - V Output - V Output No pin Common + V Output + V Output No pin No pin 3000Vdc Single Dual + V Input + V Input - V Input - V Input No pin No pin - V Output - V Output No pin Common + V Output + V Output Dimensions Derating 5V input models only Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 50 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Conducted Emissions Model 5 Vin 12 Vin C1 1210 2.2µF / 100V 1210 2.2µF / 100V L1 18 µH 18 µH EFT Typical Efficiency Example Charts Eff % AM3D‐0509SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Eff % AM3D‐1205SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.D Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only