Z ibo Seno Electronic Engineering Co., Ltd. GBPC15 SERIES 15A GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Features ! Glass Passivated Die Construction A ! ! ! Low Reverse Leakage Current Low Power Loss, High Efficiency Electrically Isolated Epoxy Case for Maximum Heat Dissipation Case to Terminal Isolation Voltage 2500V C ! A C G G ~ ~ + ~ D - C + C - ~ D H H Mechanical Data ! ! ! ! ! ! ! ! E E B Case: Molded Plastic with Heatsink, Available in Both Low Profile and Standard Case Terminals: Plated Faston Lugs or Wire Leads, Add “W” Suffix to Indicate Wire Leads Polarity: As Marked on Case Mounting: Through Hole with #10 Screw Mounting Torque: 23 cm-kg (20 in-lbs) Max. Weight: 21 grams (GBPC); 18 grams (GBPC-W) Marking: Type Number Lead Free: For RoHS / Lead Free Version B GBPC-W GBPC Dim A B C D E G H Maximum Ratings and Electrical Characteristics GBPC GBPC-W Low Profile / Standard Low Profile / Standard Min Max Min Max 28.40 28.70 28.40 28.70 7.50 / 10.97 8.50 / 11.23 7.50 / 10.97 8.50 / 11.23 15.70 16.70 17.10 19.10 17.50 18.50 10.90 11.90 19.08 / 22.86 21.58 / 25.40 30.50 — Hole for #10 screw, 5.08Ø Nominal 6.35 Typical 0.97Ø 1.07Ø All Dimension in mm @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 50°C GBPC15 10 12 01 02 04 06 08 VRRM VRWM VR 50 100 200 400 600 800 1000 1200 1400 1600 V VR(RMS) 35 70 140 280 420 560 700 V 840 14 980 16 Unit 00 1120 IO 15 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 300 A Forward Voltage per leg VFM 1.1 V Peak Reverse Current @TC = 25°C At Rated DC Blocking Voltage @TC = 125°C IRM 5.0 500 µA I2t Rating for Fusing (t < 8.3ms) I2t 375 A2s Typical Junction Capacitance (Note 1) Cj 300 pF Typical Thermal Resistance per leg (Note 2) RJC 1.9 °C/W RMS Isolation Voltage from Case to Leads VISO 2500 V Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C @IF = 7.5A Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Mounted on 127 x 102 x 76mm Al. finned plate. GBPC15 SERIES 1 of 2 www.senocn.com Alldatasheet Z ibo Seno Electronic Engineering Co., Ltd. GBPC15 SERIES IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) 40 30 20 10 0 Resistive or Inductive load 0 25 50 75 100 125 150 100 10 1.0 0.1 Tj = 25°C 0.01 0.2 0.4 0.6 1000 Single Half-Sine Wave (JEDEC Method) 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (°C) Fig. 1 Forward. Current Derating Curve 400 Pulse Width = 300µs 200 100 f = 1 Mhz Tj = 25°C 100 Tj = 150°C 0 1 10 10 100 IR, INSTANTANEOUS REVERSE CURRENT (µA) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) 100 Tj = 125°C 10 1.0 0.1 Tj = 25°C 0.01 100 120 140 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) GBPC15 SERIES 2 of 2 www.senocn.com Alldatasheet