STMicroelectronics BYT08PI-400 Fast recovery rectifier diode Datasheet

BYT 08PI-400
BYT 08PI-400
®
FAST RECOVERY RECTIFIER DIODES
VERY LOW REVERSE RECOVERY TIME
VERY LOW SWITCHING LOSSES
LOW NOISE TURN-OFF SWITCHING
INSULATED: capacitance 7pF
Insulating voltage 2500 VRMS
A
K
SUITABLE APPLICATIONS
FREE WHEELING DIODE IN CONVERTERS
AND MOTOR CONTROL CIRCUITS
RECTIFIER IN S.M.P.S.
Isolated
TO220AC
(Plastic)
ABSOLUTE MAXIMUM RATINGS (limiting values)
Symbol
IFRM
IF (RMS)
Parameter
Repetive Peak Forward Current
tp ≤ 10µs
RMS Forward Current
Value
Unit
130
A
16
A
IF (AV)
Average Forward Current
Tc = 105°C
δ = 0.5
8
A
IFSM
Surge non Repetitive Forward Current
tp = 10ms
Sinusoidal
100
A
Power Dissipation
Tc = 80°C
20
W
- 40 to +150
°C
Value
Unit
P
Tstg
Tj
Storage and Junction Temperature Range
Symbol
Parameter
VRRM
Repetitive Peak Reverse Voltage
400
V
VRSM
Non Repetitive Peak Reverse Voltage
440
V
Value
Unit
3.5
°C/W
THERMAL RESISTANCE
Symbol
Rth (j - c)
Parameter
Junction-case
August 1998 Ed : 1A
1/5
BYT 08PI-400
ELECTRICAL CHARACTERISTICS
STATIC CHARACTERISTICS
Synbol
IR
Test Conditions
Min.
Typ.
VR = VRRM
Tj = 25°C
Tj = 100°C
VF
IF = 8A
Tj = 25°C
Max.
Unit
15
µA
2.5
mA
1.5
V
1.4
Tj = 100°C
RECOVERY CHARACTERISTICS
Symbol
trr
Test Conditions
Tj = 25°C
Min.
Typ.
Max.
Unit
ns
IF = 1A
diF/dt = - 15A/µs
VR = 30V
75
IF = 0.5A
IR = 1A
Irr = 0.25A
35
TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance)
Symbol
tIRM
Test Conditions
diF/dt = - 32A/µs
diF/dt = - 64A/µs
IRM
Min.
VCC = 200 V IF = 8A
Lp ≤ 0.05µH Tj = 100°C
See Figure 11
Typ.
Max.
Unit
75
ns
2.2
A
50
diF/dt = - 32A/µs
2.8
diF/dt = - 64A/µs
TURN-OFF OVERVOLTAGE COEFFICIENT (With Series Inductance)
Symbol
C=
VRP
VCC
Test Conditions
Tj = 100°C
diF/dt = - 8A/µs
VCC = 120V
Lp = 9µH
Min.
IF = IF (AV)
See note
See figure 12
Typ.
Max.
Unit
3.3
Note: Applicable to BYT 08 PI-400 only
To evaluate the conduction losses use the following equations:
VF = 1.1 + 0.024IF
P = 1.1 x IF(AV) + 0.024 IF2(RMS)
Figure 1. Low frequency power losses versus
average current
2/5
Figure 2. Peak current versus form factor
BYT 08PI-400
Figure 3. Non repetitive peak surge current
versus overload duration
Figure 4. Thermal impedance versus pulse
width
Figure 5. Voltage drop versus forward current
Figure 6. Recovery charge versus diF/dt-
Figure 7. Recovery time versus diF/dt-
Figure 8. Peak reverse current versus diF/dt-
3/5
3/5
BYT 08PI-400
Figure 9. Peak forward voltage versus diF/dt-
Figure 10. Dynamic parameters versus
junction temperature.
Figure 11. Turn-off switching characteristics (without series inductance).
Figure 12. Turn-off switching characteristics (with series inductance).
4/5
BYT 08PI-400
PACKAGE MECHANICAL DATA
Isolated TO220AC Plastic
C
B
b2
I
REF.
L
F
A
a1
l2
a2
b1
c1
e
A
a1
a2
B
b1
b2
C
c1
c2
e
F
I
L
l2
DIMENSIONS
Millimeters
Inches
Min.
Max.
Min.
Max.
14.23
15.87
0.560
0.625
4.50
0.177
12.70
14.70
0.500
0.579
10.20
10.45
0.402
0.411
0.64
0.96
0.025
0.038
1.15
1.39
0.045
0.055
4.48
4.82
0.176
0.190
0.35
0.65
0.020
0.026
2.10
2.70
0.083
0.106
4.58
5.58
0.180
0.220
5.85
6.85
0.230
0.270
3.55
4.00
0.140
0.157
2.54
3.00
0.100
0.118
1.45
1.75
0.057
0.069
c2
Marking: type number
Cooling method: by conduction (method C)
Weight: 1.86g
Recommended torque value: 80cm. N
Maximum torque value: 100cm. N
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsIbility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval
of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
© 1998 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
5/5
Similar pages