Conductive Polymer Hybrid Aluminum Electrolytic Capacitors / ZA Surface Mount Type Series: ZA Type: V High temperature Lead-Free reflow ■ Features ● Endurance: 10000 h at 105 ℃ ● Low ESR and High ripple current (70 % over, Lower ESR than Current V-FP) ● High voltage (to 80V) ● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. (φ8 mm and larger) ● AEC-Q200 qualified* ● RoHS directive compliant ■ Specifications -55 ℃ to +105 ℃ 25 V.DC to 80 V.DC Nominal Cap. Range 10 μF to 330 μF CapacitanceTolerance ±20 % (120 Hz/+20 ℃) DC Leakage Current l ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) tan δ Please see the attached Standard Products list The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 ℃ for 10000 hours. After stabilizing at room temperature(+15 to 35 ℃), the capacitor shall not exceed the specified limits. (The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.) Capacitance change ±30 % of initial measured value tan δ ≦ 200 % initial specified value Endurance E.S.R. ≦ 200 % initial specified value DC leakage current ≦ initial specified value Size Code ESR after Endurance C D D8 F G （Ω/100 kHz) (-40℃) 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +105 ℃±2 ℃ with no voltage applied and then being stabilized at +20 ℃, Shelf Life capacitors shall meet the limits specified in Endurance. (With voltage treatment) After applying rated working voltage for 2000 hours at +85℃±2℃ / 85% to 90%RH and then being stabilized at +20℃, Capacitors shall meet the following limits. Capacitance change ±30 % of initial measured value Damp Heat (Load) tan δ ≦ 200 % initial specified value E.S.R. ≦ 200 % initial specified value DC leakage current ≦ initial specified value After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value Resistance to Soldering Heat tan δ ≦ initial specified value DC leakage current ≦ initial specified value Category Temp.Range Rated W.V. Range (Unit : mm) E ZA Series identification (P) W L Pressure Relief (φ10 and (I) Capacitance (μF) B±0.2 φD±0.5 Negative polarity marking (－) 33 A±0.2 0.3max. K Marking color : BLACK H Example : 25 V 33 μF (I) ■ Dimensions in mm (not to scale) ■ Marking ( ) Reference Rated Voltage Mark Size code Lot number C D D8 F G Rated Voltage Mark E V H 25 V 35 V 50 V J K 63 V 80 V D L A, B H 5.0 5.8±0.3 5.3 6.5 max. 6.3 5.8±0.3 6.6 7.8 max. 6.3 7.7±0.3 6.6 7.8 max. 8.0 10.2±0.3 8.3 10.0 max. 10.0 10.2±0.3 10.3 12.0 max. I W P K 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.5 1.8 1.8 3.1 4.6 0.35-+0.15 0.20 0.35-+0.15 0.20 0.35-+0.15 0.20 0.70±0.2 0.70±0.2 ＊ This product qualifi for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Oct. 2014 － EEE-2 － Conductive Polymer Hybrid Aluminum Electrolytic Capacitors / ZA ■ Standard Products Endurance： 105 ℃ 10000 h Case size W.V. (V) 25 35 50 63 80 Cap. (±20 %) (μF) 33 56 100 220 330 22 27 47 68 150 270 10 22 33 68 100 10 22 33 56 22 33 Dia. Length (mm) 5 6.3 6.3 8 10 5 6.3 6.3 6.3 8 10 5 6.3 6.3 8 10 6.3 6.3 8 10 8 10 (mm) 5.8 5.8 7.7 10.2 10.2 5.8 5.8 5.8 7.7 10.2 10.2 5.8 5.8 7.7 10.2 10.2 5.8 7.7 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification Size Code C D D8 F G C D D D8 F G C D D8 F G D D8 F G F G Ripple E.S.R. tan δ Current (100 kHz) (100 kHz) (120 Hz) (+105 ℃) (+20 ℃) (+20 ℃) (mA r.m.s.) (mΩ) 900 80 0.14 1300 50 0.14 2000 30 0.14 2300 27 0.14 2500 20 0.14 900 100 0.12 1300 60 0.12 1300 60 0.12 2000 35 0.12 2300 27 0.12 2500 20 0.12 750 120 0.10 1100 80 0.10 1600 40 0.10 1800 30 0.10 2000 28 0.10 1000 120 0.08 1500 80 0.08 1700 40 0.08 1800 30 0.08 1550 45 0.08 1700 36 0.08 Part No. (RoHS: compliant) Reflow EEHZA1E330R EEHZA1E560P EEHZA1E101XP EEHZA1E221P EEHZA1E331P EEHZA1V220R EEHZA1V270P EEHZA1V470P EEHZA1V680XP EEHZA1V151P EEHZA1V271P EEHZA1H100R EEHZA1H220P EEHZA1H330XP EEHZA1H680P EEHZA1H101P EEHZA1J100P EEHZA1J220XP EEHZA1J330P EEHZA1J560P EEHZA1K220P EEHZA1K330P (5) (5) (5) (6) (6) (5) (5) (5) (5) (6) (6) (5) (5) (5) (6) (6) (5) (5) (6) (6) (6) (6) Taping (pcs) 1000 1000 900 500 500 1000 1000 1000 900 500 500 1000 1000 900 500 500 1000 900 500 500 500 500 ・Please refer to the page of "Reflow Profile" and "The Taping Dimensions". · When requesting vibration-proof product, please put the last “V” instead to “P” ■ Frequency correction factor for ripple current Capacitance (μF) C < 47 47 ≦ C < 150 150 ≦ C Frequenc y (kHz) Correction factor 0.1 0.12 0.2 0.3 0.5 1 2 3 5 10 15 20 30 40 50 100 300 500 1000 0.10 0.10 0.10 0.15 0.20 0.30 0.40 0.45 0.50 0.60 0.65 0.70 0.75 0.80 0.85 1.00 1.00 1.05 1.05 0.15 0.15 0.20 0.25 0.30 0.40 0.45 0.55 0.60 0.70 0.75 0.80 0.80 0.85 0.90 1.00 1.00 1.00 1.00 0.15 0.15 0.25 0.25 0.30 0.45 0.50 0.60 0.65 0.75 0.80 0.85 0.85 0.85 0.90 1.00 1.00 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Oct. 2014 － EEE-3 －